NAME

Tinkerforge::BrickletTemperature - Measures ambient temperature with 0.5°C accuracy

CONSTANTS

DEVICE_IDENTIFIER

This constant is used to identify a Temperature Bricklet.

The get_identity() subroutine and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

DEVICE_DISPLAY_NAME

This constant represents the display name of a Temperature Bricklet.

CALLBACK_TEMPERATURE

This constant is used with the register_callback() subroutine to specify the CALLBACK_TEMPERATURE callback.

CALLBACK_TEMPERATURE_REACHED

This constant is used with the register_callback() subroutine to specify the CALLBACK_TEMPERATURE_REACHED callback.

FUNCTION_GET_TEMPERATURE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_TEMPERATURE_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_TEMPERATURE_CALLBACK_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_TEMPERATURE_CALLBACK_THRESHOLD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_TEMPERATURE_CALLBACK_THRESHOLD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_DEBOUNCE_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_DEBOUNCE_PERIOD

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_SET_I2C_MODE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_I2C_MODE

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTION_GET_IDENTITY

This constant is used with the get_response_expected(), set_response_expected() and set_response_expected_all() subroutines.

FUNCTIONS

new()

Creates an object with the unique device ID *uid* and adds it to the IP Connection *ipcon*.

get_temperature()

Returns the temperature of the sensor.

If you want to get the temperature periodically, it is recommended to use the :cb:`Temperature` callback and set the period with :func:`Set Temperature Callback Period`.

set_temperature_callback_period()

Sets the period with which the :cb:`Temperature` callback is triggered periodically. A value of 0 turns the callback off.

The :cb:`Temperature` callback is only triggered if the temperature has changed since the last triggering.

get_temperature_callback_period()

Returns the period as set by :func:`Set Temperature Callback Period`.

set_temperature_callback_threshold()

Sets the thresholds for the :cb:`Temperature Reached` callback.

The following options are possible:

.. csv-table:: :header: "Option", "Description" :widths: 10, 100

"'x'",    "Callback is turned off"
"'o'",    "Callback is triggered when the temperature is *outside* the min and max values"
"'i'",    "Callback is triggered when the temperature is *inside* the min and max values"
"'<'",    "Callback is triggered when the temperature is smaller than the min value (max is ignored)"
"'>'",    "Callback is triggered when the temperature is greater than the min value (max is ignored)"

get_temperature_callback_threshold()

Returns the threshold as set by :func:`Set Temperature Callback Threshold`.

set_debounce_period()

Sets the period with which the threshold callback

* :cb:`Temperature Reached`

is triggered, if the threshold

* :func:`Set Temperature Callback Threshold`

keeps being reached.

get_debounce_period()

Returns the debounce period as set by :func:`Set Debounce Period`.

set_i2c_mode()

Sets the I2C mode. Possible modes are:

* 0: Fast (400kHz) * 1: Slow (100kHz)

If you have problems with obvious outliers in the Temperature Bricklet measurements, they may be caused by EMI issues. In this case it may be helpful to lower the I2C speed.

It is however not recommended to lower the I2C speed in applications where a high throughput needs to be achieved.

.. versionadded:: 2.0.1$nbsp;(Plugin)

get_i2c_mode()

Returns the I2C mode as set by :func:`Set I2C Mode`.

.. versionadded:: 2.0.1$nbsp;(Plugin)

get_identity()

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an :ref:`Isolator Bricklet <isolator_bricklet>` is always at position 'z'.

The device identifier numbers can be found :ref:`here <device_identifier>`. |device_identifier_constant|