Why not adopt me?
NAME
Perl::ToPerl6::Config - The final derived Perl::ToPerl6 configuration, combined from any profile file and command-line parameters.
DESCRIPTION
Perl::ToPerl6::Config takes care of finding and processing user-preferences for Perl::ToPerl6. The Config object defines which Transformer modules will be loaded into the Perl::ToPerl6 engine and how they should be configured. You should never really need to instantiate Perl::ToPerl6::Config directly because the Perl::ToPerl6 constructor will do it for you.
INTERFACE SUPPORT
This is considered to be a non-public class. Its interface is subject to change without notice.
CONSTRUCTOR
METHODS
apply_transform( -policy => $policy_name, -params => \%param_hash )-
Creates a Transformer object and loads it into this Config. If the object cannot be instantiated, it will throw a fatal exception. Otherwise, it returns a reference to this ToPerl6.
-policy is the name of a Perl::ToPerl6::Transformer subclass module. The
'Perl::ToPerl6::Transformer'portion of the name can be omitted for brevity. This argument is required.-params is an optional reference to a hash of Transformer parameters. The contents of this hash reference will be passed into to the constructor of the Transformer module. See the documentation in the relevant Transformer module for a description of the arguments it supports.
all_transformers_enabled_or_not()-
Returns a list containing references to all the Transformer objects that have been seen. Note that the state of these objects is not trustworthy. In particular, it is likely that some of them are not prepared to examine any documents.
transformers()-
Returns a list containing references to all the Transformer objects that have been enabled and loaded into this Config.
exclude()-
Returns the value of the
-excludeattribute for this Config. include()-
Returns the value of the
-includeattribute for this Config. force()-
Returns the value of the
-forceattribute for this Config. only()-
Returns the value of the
-onlyattribute for this Config. profile_strictness()-
Returns the value of the
-profile-strictnessattribute for this Config. severity()-
Returns the value of the
-severityattribute for this Config. single_policy()-
Returns the value of the
-single-policyattribute for this Config. theme()-
Returns the Perl::ToPerl6::Theme object that was created for this Config.
top()-
Returns the value of the
-topattribute for this Config. verbose()-
Returns the value of the
-verboseattribute for this Config. color()-
Returns the value of the
-colorattribute for this Config. pager()-
Returns the value of the
-pagerattribute for this Config. unsafe_allowed()-
Returns the value of the
-allow-unsafeattribute for this Config. mogrification_fatal()-
Returns the value of the
-mogrifysm-fatalattribute for this Config. color_severity_highest()-
Returns the value of the
-color-severity-highestattribute for this Config. color_severity_high()-
Returns the value of the
-color-severity-highattribute for this Config. color_severity_medium()-
Returns the value of the
-color-severity-mediumattribute for this Config. color_severity_low()-
Returns the value of the
-color-severity-lowattribute for this Config. color_severity_lowest()-
Returns the value of the
-color-severity-lowestattribute for this Config. program_extensions()-
Returns the value of the
-program_extensionsattribute for this Config. This is an array of the file name extensions that represent program files. program_extensions_as_regexes()-
Returns the value of the
-program_extensionsattribute for this Config, as an array of case-sensitive regexes matching the ends of the file names that represent program files.
SUBROUTINES
Perl::ToPerl6::Config has a few static subroutines that are used internally, but may be useful to you in some way.
site_policy_names()-
Returns a list of all the Transformer modules that are currently installed in the Perl::ToPerl6:Transformer namespace. These will include modules that are distributed with Perl::ToPerl6 plus any third-party modules that have been installed.
CONFIGURATION
Most of the settings for Perl::ToPerl6 and each of the Transformer modules can be controlled by a configuration file. The default configuration file is called .perlmogrifyrc. Perl::ToPerl6::Config will look for this file in the current directory first, and then in your home directory. Alternatively, you can set the PERLMOGRIFY environment variable to explicitly point to a different file in another location. If none of these files exist, and the -profile option is not given to the constructor, then all Policies will be loaded with their default configuration.
The format of the configuration file is a series of INI-style blocks that contain key-value pairs separated by '='. Comments should start with '#' and can be placed on a separate line or after the name-value pairs if you desire.
Default settings for Perl::ToPerl6 itself can be set before the first named block. For example, putting any or all of these at the top of your configuration file will set the default value for the corresponding Perl::ToPerl6 constructor argument.
severity = 3 #Integer from 1 to 5
only = 1 #Zero or One
force = 0 #Zero or One
verbose = 4 #Integer or format spec
top = 50 #A positive integer
theme = risky + (pbp * security) - cosmetic #A theme expression
include = NamingConventions ClassHierarchies #Space-delimited list
exclude = Variables Modules::RequirePackage #Space-delimited list
color = 1 #Zero or One
allow_unsafe = 1 #Zero or One
color-severity-highest = bold red #Term::ANSIColor
color-severity-high = magenta #Term::ANSIColor
color-severity-medium = #no coloring
color-severity-low = #no coloring
color-severity-lowest = #no coloring
program-extensions = #Space-delimited listThe remainder of the configuration file is a series of blocks like this:
[Perl::ToPerl6::Transformer::Category::TransformerName]
severity = 1
set_themes = foo bar
add_themes = baz
arg1 = value1
arg2 = value2Perl::ToPerl6::Transformer::Category::TransformerName is the full name of a module that implements the policy. The Transformer modules distributed with Perl::ToPerl6 have been grouped into categories according to the table of contents in Damian Conway's book Perl Best Practices. For brevity, you can omit the 'Perl::ToPerl6::Transformer' part of the module name.
severity is the level of importance you wish to assign to the Transformer. All Transformer modules are defined with a default severity value ranging from 1 (least severe) to 5 (most severe). However, you may disagree with the default severity and choose to give it a higher or lower severity, based on your own coding philosophy.
The remaining key-value pairs are configuration parameters that will be passed into the constructor of that Transformer. The constructors for most Transformer modules do not support arguments, and those that do should have reasonable defaults. See the documentation on the appropriate Transformer module for more details.
Instead of redefining the severity for a given Transformer, you can completely disable a Transformer by prepending a '-' to the name of the module in your configuration file. In this manner, the Transformer will never be loaded, regardless of the -severity given to the Perl::ToPerl6::Config constructor.
A simple configuration might look like this:
#--------------------------------------------------------------
# I think these are really important, so always load them
[TestingAndDebugging::RequireUseStrict]
severity = 5
[TestingAndDebugging::RequireUseWarnings]
severity = 5
#--------------------------------------------------------------
# I think these are less important, so only load when asked
[Variables::ProhibitPackageVars]
severity = 2
[ControlStructures::ProhibitPostfixControls]
allow = if unless #My custom configuration
severity = 2
#--------------------------------------------------------------
# Give these transformers a custom theme. I can activate just
# these transformers by saying (-theme => 'larry + curly')
[Modules::RequireFilenameMatchesPackage]
add_themes = larry
[TestingAndDebugging::RequireTestLables]
add_themes = curly moe
#--------------------------------------------------------------
# I do not agree with these at all, so never load them
[-NamingConventions::Capitalization]
[-ValuesAndExpressions::ProhibitMagicNumbers]
#--------------------------------------------------------------
# For all other Policies, I accept the default severity, theme
# and other parameters, so no additional configuration is
# required for them.For additional configuration examples, see the perlmogrifyrc file that is included in this t/examples directory of this distribution.
THE POLICIES
A large number of Transformer modules are distributed with Perl::ToPerl6. They are described briefly in the companion document Perl::ToPerl6::TransformerSummary and in more detail in the individual modules themselves.
POLICY THEMES
Each Transformer is defined with one or more "themes". Themes can be used to create arbitrary groups of Policies. They are intended to provide an alternative mechanism for selecting your preferred set of Policies. For example, you may wish disable a certain subset of Policies when analyzing test programs. Conversely, you may wish to enable only a specific subset of Policies when analyzing modules.
The Policies that ship with Perl::ToPerl6 are have been broken into the following themes. This is just our attempt to provide some basic logical groupings. You are free to invent new themes that suit your needs.
THEME DESCRIPTION
--------------------------------------------------------------------------
core All transformers that ship with Perl::ToPerl6
pbp Policies that come directly from "Perl Best Practices"
bugs Policies that prevent or reveal bugs
maintenance Policies that affect the long-term health of the code
cosmetic Policies that only have a superficial effect
complexity Policies that specificaly relate to code complexity
security Policies that relate to security issues
tests Policies that are specific to test programsSay `perlmogrify -list` to get a listing of all available transformers and the themes that are associated with each one. You can also change the theme for any Transformer in your .perlmogrifyrc file. See the "CONFIGURATION" section for more information about that.
Using the -theme option, you can combine theme names with mathematical and boolean operators to create an arbitrarily complex expression that represents a custom "set" of Policies. The following operators are supported
Operator Alternative Meaning
----------------------------------------------------------------------------
* and Intersection
- not Difference
+ or UnionOperator precedence is the same as that of normal mathematics. You can also use parenthesis to enforce precedence. Here are some examples:
Expression Meaning
----------------------------------------------------------------------------
pbp * bugs All transformers that are "pbp" AND "bugs"
pbp and bugs Ditto
bugs + cosmetic All transformers that are "bugs" OR "cosmetic"
bugs or cosmetic Ditto
pbp - cosmetic All transformers that are "pbp" BUT NOT "cosmetic"
pbp not cosmetic Ditto
-maintenance All transformers that are NOT "maintenance"
not maintenance Ditto
(pbp - bugs) * complexity All transformers that are "pbp" BUT NOT "bugs",
AND "complexity"
(pbp not bugs) and complexity DittoTheme names are case-insensitive. If -theme is set to an empty string, then it is equivalent to the set of all Policies. A theme name that doesn't exist is equivalent to an empty set. Please See http://en.wikipedia.org/wiki/Set for a discussion on set theory.
SEE ALSO
Perl::ToPerl6::OptionsProcessor, Perl::ToPerl6::UserProfile
AUTHOR
Jeffrey Ryan Thalhammer <jeff@imaginative-software.com>
COPYRIGHT
Copyright (c) 2005-2011 Imaginative Software Systems. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of this license can be found in the LICENSE file included with this module.