NAME
DBIx::Class::Migration::Tutorial::FirstMigration - Prepare your first Migration
GOAL
In this section you will use DBIx::Class::Migration to prepare migration files for version 1. You will also install a test database, create some 'seed' data and dump some fixtures.
In preparation for this section, you might wish to revist the documentation for DBIx::Class::DeploymentHandler and in particular DBIx::Class::DeploymentHandler::Manual::Intro
Using the dbic-migration commandline tool
From your project home directory (that contains the dist.ini file) run the dbic-migration command line tool:
dbic-migration version --schema_class MusicBase::Schema -IlibThis should return (something similar to):
Application version is 0.001Let's do a quick review. dbic-migration is your main gateway to managing your migrations. When using the tool you will give it one command (such as version above) and any number of option flags (starting with -- or -).
When using the tool, you'll need to specify the schema_class that you are creating and using migrations for. Typically this will be your subclass of DBIx::Class::Schema, and you'll need to extend the Perl module search path with I as above. This is so that perl know about your custom application libraries.
If you are going to be working with one schema for a bit, you can export DBIC_MIGRATION_SCHEMA_CLASS into your current shell, that way you don't need to keep retyping it. If your shell is bash you can do this with the following command:
export DBIC_MIGRATION_SCHEMA_CLASS=MusicBase::SchemaThen you can simply do:
dbic-migration -Ilib versionFor the remainder of the tutorial, I will assume your Schema Class has been exported. Remember, you can always specific with the --schema_class option flag.
Before we move on, let's see the status of your schema and database:
dbic-migration -Ilib statusThis should return an error similar to the following:
Failed to find share dir for dist 'MusicBase-Schema' at ....Why did this happen? In order to use DBIx::Class::Migration you need to tell it where to put the migration files. You'd use the --target_dir option flag to do this, but if you don't provide a value, it will automatically assume you have a share directory in the home directory of you application and wish to put files there. This is a good, accepted community practice for storing non code data for your project and I recommend you follow it. Let's create the share directory and try again:
mkdir share
dbic-migration -Ilib statusYou should now get:
Schema is 1
Database is not currently installedGreat! Now you have the basics of using the commandline tool!
Prepare migration files
Let's create some migrations for Version 1 of your Schema.
dbic-migration -Ilib prepareYou should see:
There is not current database deployed, so I can't prepare upgrades
or downgradesNOTE: If you are getting some wild debugging messages, please see DBIx::Class::Migration::FAQ for details.
Since this is the first version, we won't create any upgrades or downgrade migrations. Okay, lets see what we now have:
In your share directory you now have the following:
/share
/fixtures
/1
/conf
all_tables.json
/migrations
/_source (There's stuff in here, but we won't peek!)
/SQLite
/deploy
/1
001-auto-_VERSION.sql
001-auto.sql
musicbase-schema.dbSo Lets review. We created a default fixture configuration that just serializes all the database information. This is probably not great for the long term but until you get the hang of creating custom fixture configurations (and for this you need to review DBIx::Class::Fixtures) it will serve. In any case you can take a quick peek to get the idea:
/share/fixtures/1/conf/all_tables.json
{
"sets" : [
{
"quantity" : "all",
"class" : "Cd"
},
{
"quantity" : "all",
"class" : "Track"
},
{
"quantity" : "all",
"class" : "Artist"
}
],
"might_have" : {
"fetch" : 0
},
"belongs_to" : {
"fetch" : 0
},
"has_many" : {
"fetch" : 0
}
}DBIx::Class::Fixtures uses JSON for its configuration. In this case you can note that we are just dumping all the rows in all the tables. You will see that each time you prepare a version, we always build a fresh all_tables.json for you to use as a default (in other words, don't change this one :) ).
You should also note that the path to your fixtures and your migrations contain the schema version number you have prepared. You'll see later that as you add more schema versions this becomes your primary way of managing all the directories.
Three other files of interest have been created. The first is 001-auto-_VERSION.sql which is DDL for the default database (SQLite) to create the meta table that DBIx::Class::DeploymentHandler uses to keep track of the version history for your deployments. We also create a full DDL (data description language) for the tables that make up your application. In this case we have one table for each of the Artist, CD and Track Result classes.
/share/migrations/SQLite/deploy/1/001-auto.sql
BEGIN TRANSACTION;
--
-- Table: artist
--
CREATE TABLE artist (
artist_id INTEGER PRIMARY KEY NOT NULL,
name varchar(96) NOT NULL
);
--
-- Table: cd
--
CREATE TABLE cd (
cd_id INTEGER PRIMARY KEY NOT NULL,
artist_fk integer NOT NULL,
title varchar(96) NOT NULL,
FOREIGN KEY(artist_fk) REFERENCES artist(artist_id)
);
CREATE INDEX cd_idx_artist_fk ON cd (artist_fk);
--
-- Table: track
--
CREATE TABLE track (
track_id INTEGER PRIMARY KEY NOT NULL,
cd_fk integer NOT NULL,
title varchar(96) NOT NULL,
FOREIGN KEY(cd_fk) REFERENCES cd(cd_id)
);
CREATE INDEX track_idx_cd_fk ON track (cd_fk);
COMMITYou should review this DDL to make sure it properly reflects your schema.
DBIx::Class::DeploymentHandler will build full DDL for each of the databases you are creating migrations for. We feel this is the best approach since it lets you take maximum advantage of your target database. By default, if you don't specify a database (using the database option flag) we build migrations for SQLite, since that is easy to use and test, but you can always build any of the supported databases. For example if you ran the following:
dbic-migration -Ilib prepare --database MySQL --database SQLiteWe'd build migrations for both MySQL and SQLite. We'll try that later on, for now let's stick to SQLite, since that is very low effort and you have plenty to learn already!
There's one more file we've created musicbase-schema.db which is an empty SQLite database you can use for testing your migrations or for prototyping.
You've now completed creating your first migration!
Using a source control repository
If you are using a source control repository, like git, you probably want to ignore checking in the Sqlite database file. Ideally a new developer that checks out the project should just install the database to the current version rather than try to piggyback on your database. This allows for better developer level isolation.
In git you can add or modify .gitignore in your project directory:
share/musicbase-schema/*
share/musicbase-schema.dbThis will ignore both SQLite databases and any Mysql or Postgresql sandboxes you might create (as we will in a later section of the tutorial).
Customizing the Migration
You have a database migration, but without any initial data it would be hard to use. Let's add some code to prepopulate the database with a few musicians and cds. That way when we install the database we can run some SQL on it and play with it. Generally when you are developing you are going to need to setup the database with some useful data in order to be able to do some work. Lets do that now. Perform the following commands in your shell:
mkdir share/migrations/_common
mkdir share/migrations/_common/deploy
mkdir share/migrations/_common/deploy/1
touch share/migrations/_common/deploy/1/002-demo.plThen open the file share/migrations/_common/deploy/1/002-demo.pl in your editor of choice and add the following code:
use strict;
use warnings;
use DBIx::Class::Migration::RunScript;
migrate {
my $artist_rs = shift
->schema->resultset('Artist');
$artist_rs->create({
name =>'Michael Jackson',
cds => [
{ title => 'Thriller', tracks => [
{ title => 'Beat It' },
{ title => 'Billie Jean' }],
},
{ title => 'Bad', tracks => [
{ title => 'Dirty Diana' },
{ title => 'Smooth Criminal'},
{ title => 'Leave Me Alone' }],
},
]
});
$artist_rs->create({
name =>'Eminem',
cds => [
{ title => 'The Marshall Mathers LP', tracks => [
{ title => 'Stan' },
{ title => 'The Way I Am' }],
},
]});
};If your read the DBIx::Class::DeploymentHandler docs, you know that in addition to running SQL files natively against your database of choice, you can also create Perl run scripts, which is a Perl file that returns an anonymous subroutine (similar to Plack). That subroutine should expect to get one argument from the deployment handler, which is a schema object upon which you can run DBIx::Class commands.
IMPORTANT: The schema that is passed to your subroutine reference is one that we autogenerate using DBIx::Class::Schema::Loader. It is not the same as your application subclass of DBIx::Class::Schema (for us that would be MusicBase::Schema). Since your schema is going to be in flux, we can't rely on it for creating Perl run files. Because of this, the names of the relationships will reflect those that DBIx::Class::Schema::Loader generates as part of its introspection of the database. If you get confused and can't figure out the generated schema, you can always dump it with the make_schema command.
Why use Perl instead of SQL? You should use what makes sense to you and what you are comfortable with. I use Perl when I can since I can put that in the _common directory and use it for all the database I create migrations for. That saves me a bit of repeating myself, but adds a bit of complexity to understanding.
You should also notice that the file we created starts with '002'. This ensures that it will run after the '001' file (in this case we run 001-auto.sql first.
Awesome, you now have customized your first migration. Now we can install it!
Installing the migration
Installing the migration is straightforward:
dbic-migration -Ilib installLets take a peek at the database and make sure we got that demo data:
sqlite3 share/musicbase-schema.dbThis should give use the SQLite shell, something like this:
SQLite version 3.7.5
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
sqlite>Enter this command
.tablesYou should see that your tables have been created:
artist dbix_class_deploymenthandler_versions
cd trackLet's check the artist table. We'd expect a few because of the demo.pl script we wrote:
select * from artist;You should get:
1|Michael Jackson
2|EminemYou've just verified your installation worked! Exit the SQLite shell with the .q command.
Make your first fixtures and test them.
Next, lets dump some fixtures, that way you can mess around with the database data as much as you'd like and then get back to a good, known state at any time:
dbic-migration -Ilib dump_all_setsThis will read each of the fixture configuration you've prepared, and serialize them to /share/fixtures/1. Since we just have the all_tables fixture configuration, we'd only expect to see those. Look at the directory structure under share now:
/share
/fixtures
/1
/all_tables
_dumper_version
/artist
1.fix
2.fix
/cd
(1-3.fix)
/track
(1-7.fix)
/conf
all_tables.json
/migrations
(...)For each fixture configuration you've created, you will get a directory and serialized data. Since this is the all_tables set, this represents all the data in your database at the time your ran dump_all_sets.
Let's test the fixtures. Pretend you've been developing on this database for a while and you got a bunch of messy data around that you no longer need. Lets clear out all the tables:
dbic-migration -Ilib delete_table_rowsYou should take care with this, and make sure you are not pointing to a database you care about (such as Production) since this command loops through all your tables and issues a delete. If you have a lot of data, this could take a bit of time.
Now you have tables but no data. Lets restore the all_tables fixtures that you previously dumped:
dbic-migration -Ilib populateSince we only have one fixture configuration, we can skip the step of specifying which fixtures to load (you'd use the flag --fixture_set to do that and you can list as many as you wish). You automatically restore the all_tables set if you don't name one. You'd expect to see some output like this:
Reading configurations from .../share/fixtures/1/conf
Restored set all_tables to databaseLet's peek into the database and check:
sqlite3 share/musicbase-schema.dband see if we have some tracks:
sqlite> select * from track;
1|3|The Way I Am
2|3|Stan
3|1|Billie Jean
4|2|Leave Me Alone
5|2|Smooth Criminal
6|1|Beat It
7|2|Dirty DianaPerfect, you just restored your database to a given fixture dump!
SUMMARY
You've just learned how to use the basics of the commandline dbic-migration to prepare and install migrations. You also learned some basic customizing of your migrations and you dumped and restore some fixtures.
At this point I'd say you have the minimum setup for being able to do real database development.
NEXT STEPS
Proceed to DBIx::Class::Migration::Tutorial::SecondMigration.
AUTHOR
See DBIx::Class::Migration for author information
COPYRIGHT & LICENSE
See DBIx::Class::Migration for copyright and license information