NAME

Paws::Firehose - Perl Interface to AWS Amazon Kinesis Firehose

SYNOPSIS

use Paws;

my $obj = Paws->service('Firehose');
my $res = $obj->Method(
  Arg1 => $val1,
  Arg2 => [ 'V1', 'V2' ],
  # if Arg3 is an object, the HashRef will be used as arguments to the constructor
  # of the arguments type
  Arg3 => { Att1 => 'Val1' },
  # if Arg4 is an array of objects, the HashRefs will be passed as arguments to
  # the constructor of the arguments type
  Arg4 => [ { Att1 => 'Val1'  }, { Att1 => 'Val2' } ],
);

DESCRIPTION

Amazon Kinesis Firehose API Reference

Amazon Kinesis Firehose is a fully-managed service that delivers real-time streaming data to destinations such as Amazon S3 and Amazon Redshift.

METHODS

CreateDeliveryStream(DeliveryStreamName => Str, [RedshiftDestinationConfiguration => Paws::Firehose::RedshiftDestinationConfiguration, S3DestinationConfiguration => Paws::Firehose::S3DestinationConfiguration])

Each argument is described in detail in: Paws::Firehose::CreateDeliveryStream

Returns: a Paws::Firehose::CreateDeliveryStreamOutput instance

Creates a delivery stream.

CreateDeliveryStream is an asynchronous operation that immediately returns. The initial status of the delivery stream is CREATING. After the delivery stream is created, its status is ACTIVE and it now accepts data. Attempts to send data to a delivery stream that is not in the ACTIVE state cause an exception. To check the state of a delivery stream, use DescribeDeliveryStream.

The name of a delivery stream identifies it. You can't have two delivery streams with the same name in the same region. Two delivery streams in different AWS accounts or different regions in the same AWS account can have the same name.

By default, you can create up to 5 delivery streams per region.

A delivery stream can only be configured with a single destination, Amazon S3 or Amazon Redshift. For correct CreateDeliveryStream request syntax, specify only one destination configuration parameter: either RedshiftDestinationConfiguration or S3DestinationConfiguration

As part of S3DestinationConfiguration, optional values BufferingHints, EncryptionConfiguration, and CompressionFormat can be provided. By default, if no BufferingHints value is provided, Amazon Kinesis Firehose buffers data up to 5 MB or for 5 minutes, whichever condition is satisfied first. Note that BufferingHints is a hint, so there are some cases where the service cannot adhere to these conditions strictly; for example, record boundaries are such that the size is a little over or under the configured buffering size. By default, no encryption is performed. We strongly recommend that you enable encryption to ensure secure data storage in Amazon S3.

A few notes about RedshiftDestinationConfiguration:

• An Amazon Redshift destination requires an S3 bucket as intermediate location, as Amazon Kinesis Firehose first delivers data to S3 and then uses COPY syntax to load data into an Amazon Redshift table. This is specified in the RedshiftDestinationConfiguration.S3Configuration parameter element.

• The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY operation that reads from the S3 bucket doesn't support these compression formats.

• We strongly recommend that the username and password provided is used exclusively for Amazon Kinesis Firehose purposes, and that the permissions for the account are restricted for Amazon Redshift INSERT permissions.

Amazon Kinesis Firehose assumes the IAM role that is configured as part of destinations. The IAM role should allow the Amazon Kinesis Firehose principal to assume the role, and the role should have permissions that allows the service to deliver the data. For more information, see Amazon S3 Bucket Access in the Amazon Kinesis Firehose Developer Guide.

DeleteDeliveryStream(DeliveryStreamName => Str)

Each argument is described in detail in: Paws::Firehose::DeleteDeliveryStream

Returns: a Paws::Firehose::DeleteDeliveryStreamOutput instance

Deletes a delivery stream and its data.

You can delete a delivery stream only if it is in ACTIVE or DELETING state, and not in the CREATING state. While the deletion request is in process, the delivery stream is in the DELETING state.

To check the state of a delivery stream, use DescribeDeliveryStream.

While the delivery stream is DELETING state, the service may continue to accept the records, but the service doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, you should first stop any applications that are sending records before deleting a delivery stream.

DescribeDeliveryStream(DeliveryStreamName => Str, [ExclusiveStartDestinationId => Str, Limit => Int])

Each argument is described in detail in: Paws::Firehose::DescribeDeliveryStream

Returns: a Paws::Firehose::DescribeDeliveryStreamOutput instance

Describes the specified delivery stream and gets the status. For
example, after your delivery stream is created, call
DescribeDeliveryStream to see if the delivery stream is C<ACTIVE> and
therefore ready for data to be sent to it.

ListDeliveryStreams([ExclusiveStartDeliveryStreamName => Str, Limit => Int])

Each argument is described in detail in: Paws::Firehose::ListDeliveryStreams

Returns: a Paws::Firehose::ListDeliveryStreamsOutput instance

Lists your delivery streams.

The number of delivery streams might be too large to return using a single call to ListDeliveryStreams. You can limit the number of delivery streams returned, using the Limit parameter. To determine whether there are more delivery streams to list, check the value of HasMoreDeliveryStreams in the output. If there are more delivery streams to list, you can request them by specifying the name of the last delivery stream returned in the call in the ExclusiveStartDeliveryStreamName parameter of a subsequent call.

PutRecord(DeliveryStreamName => Str, Record => Paws::Firehose::Record)

Each argument is described in detail in: Paws::Firehose::PutRecord

Returns: a Paws::Firehose::PutRecordOutput instance

Writes a single data record into an Amazon Kinesis Firehose delivery
stream. To write multiple data records into a delivery stream, use
PutRecordBatch. Applications using these operations are referred to as
producers.

By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. Note that if you use PutRecord and PutRecordBatch, the limits are an aggregate across these two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Firehose Limits.

You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data, for example, a segment from a log file, geographic location data, web site clickstream data, etc.

Amazon Kinesis Firehose buffers records before delivering them to the destination. To disambiguate the data blobs at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or some other character unique within the data. This allows the consumer application(s) to parse individual data items when reading the data from the destination.

Amazon Kinesis Firehose does not maintain data record ordering. If the destination data needs to be re-ordered by the consumer application, the producer should include some form of sequence number in each data record.

The PutRecord operation returns a RecordId, which is a unique string assigned to each record. Producer applications can use this ID for purposes such as auditability and investigation.

If the PutRecord operation throws a ServiceUnavailableException, back off and retry. If the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.

Data records sent to Amazon Kinesis Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.

PutRecordBatch(DeliveryStreamName => Str, Records => ArrayRef[Paws::Firehose::Record])

Each argument is described in detail in: Paws::Firehose::PutRecordBatch

Returns: a Paws::Firehose::PutRecordBatchOutput instance

Writes multiple data records into a delivery stream in a single call,
which can achieve higher throughput per producer than when writing
single records. To write single data records into a delivery stream,
use PutRecord. Applications using these operations are referred to as
producers.

Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as 1,000 KB (before 64-bit encoding), up to a limit of 4 MB for the entire request. By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. Note that if you use PutRecord and PutRecordBatch, the limits are an aggregate across these two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Firehose Limits.

You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data, for example, a segment from a log file, geographic location data, web site clickstream data, and so on.

Amazon Kinesis Firehose buffers records before delivering them to the destination. To disambiguate the data blobs at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or some other character unique within the data. This allows the consumer application(s) to parse individual data items when reading the data from the destination.

The PutRecordBatch response includes a count of any failed records, FailedPutCount, and an array of responses, RequestResponses. The FailedPutCount value is a count of records that failed. Each entry in the RequestResponses array gives additional information of the processed record. Each entry in RequestResponses directly correlates with a record in the request array using the same ordering, from the top to the bottom of the request and response. RequestResponses always includes the same number of records as the request array. RequestResponses both successfully and unsuccessfully processed records. Amazon Kinesis Firehose attempts to process all records in each PutRecordBatch request. A single record failure does not stop the processing of subsequent records.

A successfully processed record includes a RecordId value, which is a unique value identified for the record. An unsuccessfully processed record includes ErrorCode and ErrorMessage values. ErrorCode reflects the type of error and is one of the following values: ServiceUnavailable or InternalFailure. ErrorMessage provides more detailed information about the error.

If FailedPutCount is greater than 0 (zero), retry the request. A retry of the entire batch of records is possible; however, we strongly recommend that you inspect the entire response and resend only those records that failed processing. This minimizes duplicate records and also reduces the total bytes sent (and corresponding charges).

If the PutRecordBatch operation throws a ServiceUnavailableException, back off and retry. If the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.

Data records sent to Amazon Kinesis Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.

UpdateDestination(CurrentDeliveryStreamVersionId => Str, DeliveryStreamName => Str, DestinationId => Str, [RedshiftDestinationUpdate => Paws::Firehose::RedshiftDestinationUpdate, S3DestinationUpdate => Paws::Firehose::S3DestinationUpdate])

Each argument is described in detail in: Paws::Firehose::UpdateDestination

Returns: a Paws::Firehose::UpdateDestinationOutput instance

Updates the specified destination of the specified delivery stream.

This operation can be used to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a given destination (for example, to change the bucket name of the Amazon S3 destination). The update may not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are normally effective within a few minutes.

If the destination type is the same, Amazon Kinesis Firehose merges the configuration parameters specified in the UpdateDestination request with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the update request, then the existing configuration parameters are retained. For example, in the Amazon S3 destination, if EncryptionConfiguration is not specified then the existing EncryptionConfiguration is maintained on the destination.

If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Amazon Kinesis Firehose does not merge any parameters. In this case, all parameters must be specified.

Amazon Kinesis Firehose uses the CurrentDeliveryStreamVersionId to avoid race conditions and conflicting merges. This is a required field in every request and the service only updates the configuration if the existing configuration matches the VersionId. After the update is applied successfully, the VersionId is updated, which can be retrieved with the DescribeDeliveryStream operation. The new VersionId should be uses to set CurrentDeliveryStreamVersionId in the next UpdateDestination operation.

SEE ALSO

This service class forms part of Paws

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues

cpanm Paws::SDK::Config

perl -MCPAN -e shell
install Paws::SDK::Config