/ 
Paws-0.22
⭐ Starred 171 / Paws::Route53::ResourceRecordSet

NAME

Paws::Route53::ResourceRecordSet

USAGE

This class represents one of two things:

Arguments in a call to a service

Use the attributes of this class as arguments to methods. You shouldn't make instances of this class. Each attribute should be used as a named argument in the calls that expect this type of object.

As an example, if Att1 is expected to be a Paws::Route53::ResourceRecordSet object:

$service_obj->Method(Att1 => { AliasTarget => $value, ..., Weight => $value  });

Results returned from an API call

Use accessors for each attribute. If Att1 is expected to be an Paws::Route53::ResourceRecordSet object:

$result = $service_obj->Method(...);
$result->Att1->AliasTarget

DESCRIPTION

A complex type that contains information about the current resource record set.

ATTRIBUTES

AliasTarget => Paws::Route53::AliasTarget

I<Alias resource record sets only:> Information about the AWS resource
to which you are redirecting traffic.

Failover => Str

I<Failover resource record sets only:> To configure failover, you add
the C<Failover> element to two resource record sets. For one resource
record set, you specify C<PRIMARY> as the value for C<Failover>; for
the other resource record set, you specify C<SECONDARY>. In addition,
you include the C<HealthCheckId> element and specify the health check
that you want Amazon Route 53 to perform for each resource record set.

You can create failover and failover alias resource record sets only in public hosted zones.

Except where noted, the following failover behaviors assume that you have included the HealthCheckId element in both resource record sets:

  • When the primary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the secondary resource record set.

  • When the primary resource record set is unhealthy and the secondary resource record set is healthy, Amazon Route 53 responds to DNS queries with the applicable value from the secondary resource record set.

  • When the secondary resource record set is unhealthy, Amazon Route 53 responds to DNS queries with the applicable value from the primary resource record set regardless of the health of the primary resource record set.

  • If you omit the HealthCheckId element for the secondary resource record set, and if the primary resource record set is unhealthy, Amazon Route 53 always responds to DNS queries with the applicable value from the secondary resource record set. This is true regardless of the health of the associated endpoint.

You cannot create non-failover resource record sets that have the same values for the Name and Type elements as failover resource record sets.

For failover alias resource record sets, you must also include the EvaluateTargetHealth element and set the value to true.

For more information about configuring failover for Amazon Route 53, see Amazon Route 53 Health Checks and DNS Failover in the Amazon Route 53 Developer Guide.

Valid values: PRIMARY | SECONDARY

GeoLocation => Paws::Route53::GeoLocation

I<Geo location resource record sets only:> A complex type that lets you
control how Amazon Route 53 responds to DNS queries based on the
geographic origin of the query. For example, if you want all queries
from Africa to be routed to a web server with an IP address of
C<192.0.2.111>, create a resource record set with a C<Type> of C<A> and
a C<ContinentCode> of C<AF>.

You can create geolocation and geolocation alias resource record sets only in public hosted zones.

If you create separate resource record sets for overlapping geographic regions (for example, one resource record set for a continent and one for a country on the same continent), priority goes to the smallest geographic region. This allows you to route most queries for a continent to one resource and to route queries for a country on that continent to a different resource.

You cannot create two geolocation resource record sets that specify the same geographic location.

The value * in the CountryCode element matches all geographic locations that aren't specified in other geolocation resource record sets that have the same values for the Name and Type elements.

Geolocation works by mapping IP addresses to locations. However, some IP addresses aren't mapped to geographic locations, so even if you create geolocation resource record sets that cover all seven continents, Amazon Route 53 will receive some DNS queries from locations that it can't identify. We recommend that you create a resource record set for which the value of CountryCode is *, which handles both queries that come from locations for which you haven't created geolocation resource record sets and queries from IP addresses that aren't mapped to a location. If you don't create a * resource record set, Amazon Route 53 returns a "no answer" response for queries from those locations.

You cannot create non-geolocation resource record sets that have the same values for the Name and Type elements as geolocation resource record sets.

HealthCheckId => Str

I<Health Check resource record sets only, not required for alias
resource record sets:> An identifier that is used to identify health
check associated with the resource record set.

REQUIRED Name => Str

The name of the domain you want to perform the action on.

Enter a fully qualified domain name, for example, www.example.com. You can optionally include a trailing dot. If you omit the trailing dot, Amazon Route 53 still assumes that the domain name that you specify is fully qualified. This means that Amazon Route 53 treats www.example.com (without a trailing dot) and www.example.com. (with a trailing dot) as identical.

For information about how to specify characters other than a-z, 0-9, and - (hyphen) and how to specify internationalized domain names, see DNS Domain Name Format in the Amazon Route 53 Developer Guide.

You can use an asterisk (*) character in the name. DNS treats the * character either as a wildcard or as the * character (ASCII 42), depending on where it appears in the name. For more information, see Using an Asterisk (*) in the Names of Hosted Zones and Resource Record Sets in the Amazon Route 53 Developer Guide

You can't use the * wildcard for resource records sets that have a type of NS.

Region => Str

I<Latency-based resource record sets only:> The Amazon EC2 region where
the resource that is specified in this resource record set resides. The
resource typically is an AWS resource, such as an Amazon EC2 instance
or an ELB load balancer, and is referred to by an IP address or a DNS
domain name, depending on the record type.

You can create latency and latency alias resource record sets only in public hosted zones.

When Amazon Route 53 receives a DNS query for a domain name and type for which you have created latency resource record sets, Amazon Route 53 selects the latency resource record set that has the lowest latency between the end user and the associated Amazon EC2 region. Amazon Route 53 then returns the value that is associated with the selected resource record set.

Note the following:

  • You can only specify one ResourceRecord per latency resource record set.

  • You can only create one latency resource record set for each Amazon EC2 region.

  • You are not required to create latency resource record sets for all Amazon EC2 regions. Amazon Route 53 will choose the region with the best latency from among the regions for which you create latency resource record sets.

  • You cannot create non-latency resource record sets that have the same values for the Name and Type elements as latency resource record sets.

ResourceRecords => ArrayRef[Paws::Route53::ResourceRecord]

A complex type that contains the resource records for the current
resource record set.

SetIdentifier => Str

I<Weighted, Latency, Geo, and Failover resource record sets only:> An
identifier that differentiates among multiple resource record sets that
have the same combination of DNS name and type. The value of
C<SetIdentifier> must be unique for each resource record set that has
the same combination of DNS name and type.

TrafficPolicyInstanceId => Str

TTL => Int

The cache time to live for the current resource record set. Note the
following:

  • If you're creating an alias resource record set, omit TTL. Amazon Route 53 uses the value of TTL for the alias target.

  • If you're associating this resource record set with a health check (if you're adding a HealthCheckId element), we recommend that you specify a TTL of 60 seconds or less so clients respond quickly to changes in health status.

  • All of the resource record sets in a group of weighted, latency, geolocation, or failover resource record sets must have the same value for TTL.

  • If a group of weighted resource record sets includes one or more weighted alias resource record sets for which the alias target is an ELB load balancer, we recommend that you specify a TTL of 60 seconds for all of the non-alias weighted resource record sets that have the same name and type. Values other than 60 seconds (the TTL for load balancers) will change the effect of the values that you specify for Weight.

REQUIRED Type => Str

The DNS record type. For information about different record types and
how data is encoded for them, see Supported DNS Resource Record Types
in the I<Amazon Route 53 Developer Guide>.

Valid values for basic resource record sets: A | AAAA | CNAME | MX | NS | PTR | SOA | SPF | SRV | TXT

Values for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CNAME | MX | PTR | SPF | SRV | TXT. When creating a group of weighted, latency, geolocation, or failover resource record sets, specify the same value for all of the resource record sets in the group.

SPF records were formerly used to verify the identity of the sender of email messages. However, we no longer recommend that you create resource record sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to some interoperability issues. Accordingly, its use is no longer appropriate for SPF version 1; implementations are not to use it." In RFC 7208, see section 14.1, The SPF DNS Record Type.

Values for alias resource record sets:

  • CloudFront distributions: A

  • ELB load balancers: A | AAAA

  • Amazon S3 buckets: A

  • Another resource record set in this hosted zone: Specify the type of the resource record set for which you're creating the alias. Specify any value except NS or SOA.

Weight => Int

I<Weighted resource record sets only:> Among resource record sets that
have the same combination of DNS name and type, a value that determines
the proportion of DNS queries that Amazon Route 53 responds to using
the current resource record set. Amazon Route 53 calculates the sum of
the weights for the resource record sets that have the same combination
of DNS name and type. Amazon Route 53 then responds to queries based on
the ratio of a resource's weight to the total. Note the following:

  • You must specify a value for the Weight element for every weighted resource record set.

  • You can only specify one ResourceRecord per weighted resource record set.

  • You cannot create latency, failover, or geolocation resource record sets that have the same values for the Name and Type elements as weighted resource record sets.

  • You can create a maximum of 100 weighted resource record sets that have the same values for the Name and Type elements.

  • For weighted (but not weighted alias) resource record sets, if you set Weight to 0 for a resource record set, Amazon Route 53 never responds to queries with the applicable value for that resource record set. However, if you set Weight to 0 for all resource record sets that have the same combination of DNS name and type, traffic is routed to all resources with equal probability.

    The effect of setting Weight to 0 is different when you associate health checks with weighted resource record sets. For more information, see Options for Configuring Amazon Route 53 Active-Active and Active-Passive Failover in the Amazon Route 53 Developer Guide.

SEE ALSO

This class forms part of Paws, describing an object used in Paws::Route53

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues