/ 
Paws-0.46
River stage two • 9 direct dependents • 11 total dependents
/ Paws::DirectConnect::VirtualInterface

NAME

Paws::DirectConnect::VirtualInterface

ATTRIBUTES

AddressFamily => Str

The address family for the BGP peer.

Valid values are: "ipv4", "ipv6" =head2 AmazonAddress => Str

The IP address assigned to the Amazon interface.

AmazonSideAsn => Int

The autonomous system number (ASN) for the Amazon side of the connection.

Asn => Int

The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

The valid values are 1-2147483647.

AuthKey => Str

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

AwsDeviceV2 => Str

The Direct Connect endpoint on which the virtual interface terminates.

BgpPeers => ArrayRef[Paws::DirectConnect::BGPPeer]

The BGP peers configured on this virtual interface.

ConnectionId => Str

The ID of the connection.

CustomerAddress => Str

The IP address assigned to the customer interface.

CustomerRouterConfig => Str

The customer router configuration.

DirectConnectGatewayId => Str

The ID of the Direct Connect gateway.

JumboFrameCapable => Bool

Indicates whether jumbo frames (9001 MTU) are supported.

Location => Str

The location of the connection.

Mtu => Int

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 9001. The default value is 1500.

OwnerAccount => Str

The ID of the AWS account that owns the virtual interface.

Region => Str

The AWS Region where the virtual interface is located.

RouteFilterPrefixes => ArrayRef[Paws::DirectConnect::RouteFilterPrefix]

The routes to be advertised to the AWS network in this Region. Applies to public virtual interfaces.

Tags => ArrayRef[Paws::DirectConnect::Tag]

The tags associated with the virtual interface.

VirtualGatewayId => Str

The ID of the virtual private gateway. Applies only to private virtual interfaces.

VirtualInterfaceId => Str

The ID of the virtual interface.

VirtualInterfaceName => Str

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

VirtualInterfaceState => Str

The state of the virtual interface. The following are the possible values:

  • confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

  • verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

  • pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

  • available: A virtual interface that is able to forward traffic.

  • down: A virtual interface that is BGP down.

  • deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

  • deleted: A virtual interface that cannot forward traffic.

  • rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.

  • unknown: The state of the virtual interface is not available.

Valid values are: "confirming", "verifying", "pending", "available", "down", "deleting", "deleted", "rejected", "unknown" =head2 VirtualInterfaceType => Str

The type of virtual interface. The possible values are private and public.

Vlan => Int

The ID of the VLAN.

_request_id => Str