NAME
Prima::faq - Frequently asked questions about Prima
DESCRIPTION
The FAQ covers various topics around Prima, such as distribution, compilation, installation, and programming.
COMMON
What is Prima?
Prima is a general purpose extensible graphical user interface toolkit with a rich set of standard widgets and an emphasis on 2D image processing tasks. A Perl program using PRIMA looks and behaves identically on X, Win32.
Yeah, right. So what is Prima again?
Ok. A Yet Another Perl GUI.
Why bother with the Yet Another thing, while there is Perl-Tk and plenty of others?
Prima was started on OS/2, where Tk didn't really run. We have had two options - either port Tk, or write something on our own, probably better than the existing tools. We believe that we've succeeded.
Interestingly enough, Prima still builds for OS/2 (as of July 2012), but its support was killed because no one needs it anyway.
Why Perl?
Why not? Perl is great. The high-level GUI logic fits badly into C, C++, or the like, so a scripting language is probably the way to go here.
But I want to use Prima in another language.
Unless your language has runtime binding with perl, you cannot.
Who wrote Prima?
Dmitry Karasik implemented the majority of the toolkit, after the original idea by Anton Berezin. The latter and set of contributors helped the development of the toolkit since then.
What is the copyright?
The copyright is a modified BSD license, where only two first paragraphs remain out of the original four. The text of copyright is present is almost all files of the toolkit.
I'd like to contribute.
You can do this is several ways. The project would probably best benefit from the advocacy, because not many people use it. Of course, you can send in new widgets, patches, suggestions, or even donations. Also, documentation is the thing that needs a particular attention, since my native language is not English, so if there are volunteers for polishing of the Prima docs, you are very welcome.
INSTALLATION
Where can I download Prima?
http://www.prima.eu.org contains links to source and binary download resources, instructions on how to subscribe to the Prima mailing list, documentation, and some other useful info.
What is better, source or binary?
Depends where your are and what are your goals. On unix, the best is to use the source. On win32 the binaries probably are preferred. If you happen to use cygwin you probably still better off using the source.
How to install binary distribution?
First, check if you've downloaded Prima binary for the correct version of Perl. For win32 ActiveState builds, difference in the minor digits of the Perl version shouldn't be a problem, for example, binary distribution for Perl build #805 should work with Perl build #808, etc etc.
To install, unpack the archive and type 'perl ms_install.pl'. The files will be copied into the perl tree.
How to compile Prima from source?
Type the following:
perl Makefile.PL
make
make installIf the 'perl Makefile.PL' fails complaining to strange errors, you can check makefile.log to see if anything is wrong. A typical situation here is that Makefile.PL may report that is cannot find Perl library, for example, where there actually it invokes the compiler in a wrong way.
Note, that in order to get Prima working from sources, your system must contain graphic libraries, such as libgif or ligjpeg, for Prima to load graphic files.
What's about the graphic libraries?
To load and save images, Prima employs graphic libraries. Such as, to load GIF files, libgif library is used, etc. Makefile.PL finds available libraries and links Prima against these. It is possible to compile Prima without any, but this is not really useful.
On every supported platform Prima can make use of the following graphic libraries:
libXpm - Xpm pixmaps
libjpeg - JPEG images
libgif - GIF images
libpng - PNG images
libtiff - tiff images
libwebp,libwebpdemux,libwebpmux - WebP imagesStrawberry perl and Cygwin come with most of them, so on these installations Prima just compiles without any trouble. For other perl builds, use one of Prima::codecs:: modules that contains the needed include and lib files. If you're installing Prima through CPAN, that gets done automatically.
img/codec_XXX.c compile error
img/codec_XXX.c files are C sources for support of the graphic libraries. In case a particular codec does not compile, the ultimate fix is to remove the file and re-run Makefile.PL . This way, the problem can be avoided easily, although at cost of a lacking support for a graphic format.
How'd I check what libraries are compiled in?
perl -MPrima -e 'print map { $_->{name}.qq(\n) } @{Prima::Image->codecs};'I have a graphic library installed, but Makefile.PL doesn't find it
The library is probably located in a weird directory so Makefile.PL must be told to use it by adding LIBPATH+=/some/weird/lib, and possibly INCPATH+=/some/weird/include in the command line. Check makefile.log created by Makefile.PL for the actual errors reported when it tries to use the library.
Compile error
There are various reasons why a compilation may fail. The best would be to copy the output together with outputs of env and perl -V and send these to the author or better open a github issue here https://github.com/dk/Prima/issues.
Prima doesn't run
Again, there are reasons for Prima to fail during the start.
First, check whether all main files are installed correctly. Prima.pm must be in your perl directory, and Prima library file ( Prima.a or Prima.so for unix, Prima.dll for win32 ) is copied in the correct location in the perl tree.
Second, try to run 'perl -MPrima -e 1' . If Prima.pm is not found, the error message would be something like
Can't locate Prima.pm in @INCIf Prima library or one of the libraries it depends on cannot be found, perl Dynaloader would complain. On win32 this usually happen when some dll files Prima needs are not found. If this is the case, try to copy these files into your PATH, for example in C:/Windows .
Prima doesn't get installed using ppm (ActiveState)
Prima uses a non-conventional build process, which is not picked up by the automated ActiveState ppm builder. So if you run "ppm install Prima" and it succeeds but installs nothing, try this:
ppm install --force http://cpan.uwinnipeg.ca/PPMPackages/10xx/Prima.ppd(Justin Allegakoen and Randy Kobes:thanks!)
Alternatively you could try to install a compiler with ppm install MinGW and then build Prima yourself.
Prima error: Can't open display
This error happens when you've compiled Prima for X11, and no connection to X11 display can be established. Check your DISPLAY environment variable, or use --display parameter when running Prima. If you do not want Prima to connect to the display, for example, to use it inside of a CGI script, either use --no-x11 parameter or include use Prima::noX11 statement in your program.
X11: my fonts are bad!
Check whether you have Xft and fontconfig installed. Prima benefits greatly from having been compiled with Xft/fontconfig. Read more in Prima::X11 .
Where are the docs installed?
Prima documentation comes in .pm and .pod files. These, when installed, are copied under perl tree, and under man tree in unix. So, 'perldoc Prima' should be sufficient to invoke the main page of the Prima documentation. Other pages can be invoked as 'perldoc Prima::Buttons', say, or, for the graphical pod reader, 'podview Prima::Buttons'. podview is the Prima doc viewer, which is also capable of displaying any POD page.
There is also a pdf file on the Prima web site www.prima.eu.org, which contains the same set of documentation but composed as a single book. Its sources are in utils/makedoc directory, somewhat rudimentary and require an installation of latex and dvips to produce one of tex, dvi, ps, or pdf targets.
Screen grabbing doesn't work on MacOSX.
It does if you 1) compile Prima with cocoa 2) allow the application (XQuartz and probably terminal) to access the screen. To do the latter, Choose Apple menu, System Preferences, click Security & Privacy, then click Privacy. Click on an icon on the left lower corner to allow changes. Then, in the screen recording tab, add XQuartz to the list of allowed applications. Note that it might not work if you run your application from a (remote) ssh session - I couldn't find how to a how to enable screen grabbing for sshd.
I've found a bug!
https://github.com/dk/Prima/issues is the place.
PROGRAMMING
How can I use .fm files of the Visual Builder inside my program?
podview Prima::VB::VBLoader
I want to use Prima inside CGI for loading and converting images only, without X11 display.
use Prima::noX11; # this prevents Prima from connecting to X11 display
use Prima;
my $i = Prima::Image-> load( ... )Note that drawing on images will be somewhat limited.
How would I change several properties with a single call?
$widget-> set(
property1 => $value1,
property2 => $value2,
...
);I want Prima::Edit to have feature XXX
If the feature is not governed by none of the Prima::Edit properties, you need to overload ::on_paint. It is not that hard as you might think.
If the feature is generic enough, you can send a patch in the list.
Tk ( Wx, Qt, whatever ) has a feature Prima doesn't.
Well, I'd probably love to see the feature in Prima as well, but I don't have a time to write it myself. Send in a patch, and I promise I'll check it out.
I wrote a program and it looks ugly with another font size
This would most certainly happen when you rely on your own screen properties. There are several ways to avoid this problem.
First, if one programs a window where there are many widgets independent of each other size, one actually can supply coordinates for these widgets as they are positioned on a screen. Don't forget to set designScale property of the parent window, which contains dimensions of the font used to design the window. One can get these by executing
perl -MPrima -MPrima::Application -le '$_=$::application->font; print $_->width, q( ), $_->height';This way, the window and the widgets would get resized automatically under another font.
Second, in case the widget layout is not that independent, one can position the widgets relatively to each other by explicitly calculating widget extension. For example, an InputLine would have height relative to the font, and to have a widget placed exactly say 2 pixels above the input line, code something like
my $input = $owner-> insert( InputLine, ... );
my $widget = $owner-> insert( Widget, bottom => $input-> top + 2 );Of course one can change the font as well, but it is a bad idea since users would get annoyed by this.
Third, one can use geometry managers, similar to the ones in Tk. See Prima::Widget::pack and Prima::Widget::place.
Finally, check the widget layouts with Prima::Stress written specifically for this purpose:
perl -MPrima::Stress myprogramHow would I write a widget class myself?
There are lots and lots of examples of this. Find a widget class similar to what you are about to write, and follow the idea. There are, though, some non-evident moments worth to enumerate.
Test your widget class with different default settings, such as colors, fonts, parent sizes, widget properties such as buffered and visible.
Try to avoid special properties for
create, where for example a particular property must always be supplied, or never supplied, or a particular combination of properties is expected. See if the DWIM principle can be applied instead.Do not be afraid to define and re-define notification types. These have large number of options, to be programmed once and then used as a DWIM helper. Consider for which notifications user callback routines ( onXxxx ) would be best to be called first, or last, whether a notification should be of multiple or single callback type.
If there is a functionality better off performed by the user-level code, consider creating an individual notification for this purpose.
Repaint only the changed areas, not the whole widget.
If your widget has scrollable areas, use
scrollmethod.Inside
on_paintcheck whether the whole or only a part of the widget is about to be repainted. Simple optimizations here increase the speed.Avoid using pre-cooked data in
on_paint, such as when for example only a particular part of a widget was invalidated, and this fact is stored in an internal variable. This is because when the actualon_paintcall is executed, the invalid area may be larger than was invalidated by the class actions. If you must though, compare values ofclipRectproperty to see whether the invalid area is indeed the same as it is expected.Remember, that inside on_paint all coordinates are inclusive-inclusive, while the widget coordinates generally are inclusive-exclusive.
Note, that
bufferedproperty does not guarantee that the widget output would be actually buffered. Same goes withantialiasandlayered; these functions are opportunistic.Write some documentation and example of use.
How would I add my widget class to the VB palette?
Check Prima/VB/examples/Widgety.pm . This file, if loaded through 'Add widget' command in VB, adds example widget class and example VB property into the VB palette and Object Inspector.
How would I use unicode/UTF8 in Prima?
Prima by default is unicode-aware, in some areas more than the Perl (as of 5.32) itself.
For example on win32 Perl has big difficulties with files with unicode characters, and this is recommended to mitigate using Prima::sys::FS, which overrides open, opendir and the like builtin functions with their unicode-friendly versions. It doesn't though overload -f,-e syntax, so use _f,_e etc instead.
Displaying UTF8 text is unproblematic, because Perl scalars can be unambiguously told whether the text they contain is in UTF8 or not. The text that comes from the user input, i e keyboard and clipboard, can be treated and reported to Prima either as UTF8 r plain text, depending on Prima::Application::wantUnicodeInput property, which is set to 1 by default. Remember though that if data are to be put through file I/O, the 'utf8' IO layer must be selected ( see open ).
The keyboard input is also easy, because a character key event comes with the character code, not the character itself, and conversion between these is done via standard perl's chr and ord.
The clipboard input is more complicated, because the clipboard may contain both UTF8 and plain text data at once, and it must be decided by the programmer explicitly which one is desired. See more in "Unicode" in Prima::Clipboard.
Is there a way to display POD text that comes with my program / package ?
$::application-> open_help( "file://$0" );
$::application-> open_help( "file://$0|DESCRIPTION" );
$::application-> open_help( 'My::Package/BUGS' );How to implement parallel processing?
Prima doesn't work if called from more than one thread, since Perl scalars cannot be shared between threads automatically, but only if explicitly told, by using thread::shared. Prima does work in multithread environments though, but only given it runs within a dedicated thread. It is important not to call Prima methods from any other thread, because scalars that may be created inside these calls will be unavailable to the Prima core, which would result in strange errors.
It is possible to run things in parallel by calling the event processing by hands: instead of entering the main loop with
run Prima;one can write
while ( $::application-> yield) {
... do some calculations ..
}That'll give Prima a chance to handle accumulated events, but that technique is only viable if calculations can be quantized into relatively short time frames.
The generic solution would be harder to implement and debug, but it scales well. The idea is to fork a process, and communicate with it via its stdin and/or stdout ( see perlipc how to do that), and use Prima::File to asynchronously read data passed through a pipe or a socket.
Note: Win32 runtime library does not support asynchronous pipes, only asynchronous sockets. Cygwin does support both asynchronous pipes and sockets.
How do I use Prima with AnyEvent or POE ?
Prima::sys::AnyEvent can be used to organize event loops driven by Prima with AnyEvent support:
use Prima qw(sys::AnyEvent); use AnyEvent; my $ev = AnyEvent->timer(after => 1, cb => sub { print "waited 1 second!\n" }); run Prima;this is the preferred, but not the only solution.
If you need AnyEvent to drive the event loop, you can fire up the Prima yield() call once in a while:
my $timer = AnyEvent->timer(after => 0, interval => 1/20, cb => sub { $::application->yield; });If you want to use Prima's internal event loop system you have to install POE::Loop::Prima and include it in your code before Prima is loaded like below: use POE 'Loop::Prima'; use Prima qw/Application/; use AnyEvent;
You can call
AnyEvent::detectto check if the implementation is'AnyEvent::Impl::POE'if you want to use Prima's event loop or it should be the event loop implementation you expect such as'AnyEvent::Impl::EV';If you use POE::Loop::Prima then you can continue to call
run Primaand should not call AnyEvent's condition variablerecvfunction.If you want to use another event library implementation of AnyEvent, you have to not call
run Primabut instead call AnyEvent's condition variablerecvfunction.See full examples in examples/socket_anyevent1.pl, examples/socket_anyevent2.pl, and examples/socket_anyevent_poe.pl.
How do I post an asynchronous message?
Prima::Component::post_message method posts a message through the system event dispatcher and returns immediately; when the message is arrived, onPostMessage notification is triggered:
use Prima qw(Application);
my $w = Prima::MainWindow-> create( onPostMessage => sub { shift; print "@_\n" });
$w-> post_message(1,2);
print "3 4 ";
run Prima;
output: 3 4 1 2This technique is fine when all calls to the post_message on the object are controlled. To multiplex callbacks one can use one of the two scalars passed to post_message as callback identification. This is done by "post" in Prima::Utils, that internally intercepts $::application's PostMessage and provides the procedural interface to the same function:
use Prima qw(Application);
use Prima::Utils qw(post);
post( sub { print "@_\n" }, 'a');
print "b";
run Prima;
output: baNow to address widgets inside TabbedNotebook / TabbedScrollNotebook ?
The tabbed notebooks work as parent widgets for Prima::Notebook, that doesn't have any interface elements on its own, and provides only page flipping function. The sub-widgets, therefore, are to be addressed as $TabbedNotebook-> Notebook-> MyButton.
How to compile a Prima-based module using XS?
Take a look at Prima::IPA, Prima::OpenGL, Prima::Image::Magick, PDL::PrimaImage, and PDL::Drawing::Prima . These modules compile against Prima dynamic module, start from there. Note - it's important to include PRIMA_VERSION_BOOTCHECK in the "BOOT:" section, to avoid binary incompatibilities, if there should be any.
How do I generate Prima executables with PAR?
You'll need some files that PAR cannot detect automatically. During the compilation phase Makefile.PL creates utils/par.txt file that contains these files. Include them with this command:
pp -A utils/par.txt -o a.out my_programAUTHOR
Dmitry Karasik, <dmitry@karasik.eu.org>.