/ 
Math-GSL-0.25_03
River stage one • 6 direct dependents • 9 total dependents
/ Math::GSL::Linalg

NAME

Math::GSL::Linalg - Functions for solving linear systems

SYNOPSIS

use Math::GSL::Linalg qw/:all/;

DESCRIPTION

Here is a list of all the functions included in this module :

gsl_linalg_matmult
gsl_linalg_matmult_mod
gsl_linalg_exponential_ss
gsl_linalg_householder_transform
gsl_linalg_complex_householder_transform
gsl_linalg_householder_hm($tau, $v, $A) - This function applies the Householder matrix P defined by the scalar $tau and the vector $v to the left-hand side of the matrix $A. On output the result P A is stored in $A. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_householder_mh($tau, $v, $A) - This function applies the Householder matrix P defined by the scalar $tau and the vector $v to the right-hand side of the matrix $A. On output the result A P is stored in $A.
gsl_linalg_householder_hv($tau, $v, $w) - This function applies the Householder transformation P defined by the scalar $tau and the vector $v to the vector $w. On output the result P w is stored in $w.
gsl_linalg_householder_hm1
gsl_linalg_complex_householder_hm($tau, $v, $A) - Does the same operation than gsl_linalg_householder_hm but with the complex matrix $A, the complex value $tau and the complex vector $v.
gsl_linalg_complex_householder_mh($tau, $v, $A) - Does the same operation than gsl_linalg_householder_mh but with the complex matrix $A, the complex value $tau and the complex vector $v.
gsl_linalg_complex_householder_hv($tau, $v, $w) - Does the same operation than gsl_linalg_householder_hv but with the complex value $tau and the complex vectors $v and $w.
gsl_linalg_hessenberg_decomp($A, $tau) - This function computes the Hessenberg decomposition of the matrix $A by applying the similarity transformation H = U^T A U. On output, H is stored in the upper portion of $A. The information required to construct the matrix U is stored in the lower triangular portion of $A. U is a product of N - 2 Householder matrices. The Householder vectors are stored in the lower portion of $A (below the subdiagonal) and the Householder coefficients are stored in the vector $tau. tau must be of length N. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_hessenberg_unpack($H, $tau, $U) - This function constructs the orthogonal matrix $U from the information stored in the Hessenberg matrix $H along with the vector $tau. $H and $tau are outputs from gsl_linalg_hessenberg_decomp.
gsl_linalg_hessenberg_unpack_accum($H, $tau, $V) - This function is similar to gsl_linalg_hessenberg_unpack, except it accumulates the matrix U into $V, so that V' = VU. The matrix $V must be initialized prior to calling this function. Setting $V to the identity matrix provides the same result as gsl_linalg_hessenberg_unpack. If $H is order N, then $V must have N columns but may have any number of rows.
gsl_linalg_hessenberg_set_zero($H) - This function sets the lower triangular portion of $H, below the subdiagonal, to zero. It is useful for clearing out the Householder vectors after calling gsl_linalg_hessenberg_decomp.
gsl_linalg_hessenberg_submatrix
gsl_linalg_hessenberg
gsl_linalg_hesstri_decomp($A, $B, $U, $V, $work) - This function computes the Hessenberg-Triangular decomposition of the matrix pair ($A, $B). On output, H is stored in $A, and R is stored in $B. If $U and $V are provided (they may be null), the similarity transformations are stored in them. Additional workspace of length N is needed in the vector $work.
gsl_linalg_SV_decomp($A, $V, $S, $work) - This function factorizes the M-by-N matrix $A into the singular value decomposition A = U S V^T for M >= N. On output the matrix $A is replaced by U. The diagonal elements of the singular value matrix S are stored in the vector $S. The singular values are non-negative and form a non-increasing sequence from S_1 to S_N. The matrix $V contains the elements of V in untransposed form. To form the product U S V^T it is necessary to take the transpose of V. A workspace of length N is required in vector $work. This routine uses the Golub-Reinsch SVD algorithm.
gsl_linalg_SV_decomp_mod($A, $X, $V, $S, $work) - This function computes the SVD using the modified Golub-Reinsch algorithm, which is faster for M>>N. It requires the vector $work of length N and the N-by-N matrix $X as additional working space. $A and $V are matrices while $S is a vector.
gsl_linalg_SV_decomp_jacobi($A, $V, $S) - This function computes the SVD of the M-by-N matrix $A using one-sided Jacobi orthogonalization for M >= N. The Jacobi method can compute singular values to higher relative accuracy than Golub-Reinsch algorithms. $V is a matrix while $S is a vector.
gsl_linalg_SV_solve($U, $V, $S, $b, $x) - This function solves the system A x = b using the singular value decomposition ($U, $S, $V) of A given by gsl_linalg_SV_decomp. Only non-zero singular values are used in computing the solution. The parts of the solution corresponding to singular values of zero are ignored. Other singular values can be edited out by setting them to zero before calling this function. In the over-determined case where A has more rows than columns the system is solved in the least squares sense, returning the solution x which minimizes ||A x - b||_2.
gsl_linalg_LU_decomp($a, $p) - factorize the matrix $a into the LU decomposition PA = LU. On output the diagonal and upper triangular part of the input matrix A contain the matrix U. The lower triangular part of the input matrix (excluding the diagonal) contains L. The diagonal elements of L are unity, and are not stored. The function returns two value, the first is 0 if the operation succeeded, 1 otherwise, and the second is the sign of the permutation.
gsl_linalg_LU_solve($LU, $p, $b, $x) - This function solves the square system A x = b using the LU decomposition of the matrix A into (LU, p) given by gsl_linalg_LU_decomp. $LU is a matrix, $p a permutation and $b and $x are vectors. The function returns 1 if the operation succeded, 0 otherwise.
gsl_linalg_LU_svx($LU, $p, $x) - This function solves the square system A x = b in-place using the LU decomposition of A into (LU,p). On input $x should contain the right-hand side b, which is replaced by the solution on output. $LU is a matrix, $p a permutation and $x is a vector. The function returns 1 if the operation succeded, 0 otherwise.
gsl_linalg_LU_refine($A, $LU, $p, $b, $x, $residual) - This function apply an iterative improvement to $x, the solution of $A $x = $b, using the LU decomposition of $A into ($LU,$p). The initial residual $r = $A $x - $b (where $x and $b are vectors) is also computed and stored in the vector $residual.
gsl_linalg_LU_invert($LU, $p, $inverse) - This function computes the inverse of a matrix A from its LU decomposition stored in the matrix $LU and the permutation $p, storing the result in the matrix $inverse.
gsl_linalg_LU_det($LU, $signum) - This function returns the determinant of a matrix A from its LU decomposition stored in the $LU matrix. It needs the integer $signum which is the sign of the permutation returned by gsl_linalg_LU_decomp.
gsl_linalg_LU_lndet($LU) - This function returns the logarithm of the absolute value of the determinant of a matrix A, from its LU decomposition stored in the $LU matrix.
gsl_linalg_LU_sgndet($LU, $signum) - This functions computes the sign or phase factor of the determinant of a matrix A, det(A)/|det(A)|, from its LU decomposition, $LU.
gsl_linalg_complex_LU_decomp($A, $p) - Does the same operation than gsl_linalg_LU_decomp but on the complex matrix $A.
gsl_linalg_complex_LU_solve($LU, $p, $b, $x) - This functions solve the square system A x = b using the LU decomposition of A into ($LU, $p) given by gsl_linalg_complex_LU_decomp.
gsl_linalg_complex_LU_svx($LU, $p, $x) - Does the same operation than gsl_linalg_LU_svx but on the complex matrix $LU and the complex vector $x.
gsl_linalg_complex_LU_refine($A, $LU, $p, $b, $x, $residual) - Does the same operation than gsl_linalg_LU_refine but on the complex matrices $A and $LU and with the complex vectors $b, $x and $residual.
gsl_linalg_complex_LU_invert($LU, $p, $inverse) - Does the same operation than gsl_linalg_LU_invert but on the complex matrces $LU and $inverse.
gsl_linalg_complex_LU_det($LU, $signum) - Does the same operation than gsl_linalg_LU_det but on the complex matrix $LU.
gsl_linalg_complex_LU_lndet($LU) - Does the same operation than gsl_linalg_LU_det but on the complex matrix $LU.
gsl_linalg_complex_LU_sgndet($LU, $signum) - Does the same operation than gsl_linalg_LU_sgndet but on the complex matrix $LU.
gsl_linalg_QR_decomp($a, $tau) - factorize the M-by-N matrix A into the QR decomposition A = Q R. On output the diagonal and upper triangular part of the input matrix $a contain the matrix R. The vector $tau and the columns of the lower triangular part of the matrix $a contain the Householder coefficients and Householder vectors which encode the orthogonal matrix Q. The vector tau must be of length k= min(M,N).
gsl_linalg_QR_solve($QR, $tau, $b, $x) - This function solves the square system A x = b using the QR decomposition of A into (QR, tau) given by gsl_linalg_QR_decomp. $QR is matrix, and $tau, $b and $x are vectors.
gsl_linalg_QR_svx($QR, $tau, $x) - This function solves the square system A x = b in-place using the QR decomposition of A into the matrix $QR and the vector $tau given by gsl_linalg_QR_decomp. On input, the vector $x should contain the right-hand side b, which is replaced by the solution on output.
gsl_linalg_QR_lssolve($QR, $tau, $b, $x, $residual) - This function finds the least squares solution to the overdetermined system $A $x = $b where the matrix $A has more rows than columns. The least squares solution minimizes the Euclidean norm of the residual, ||Ax - b||.The routine uses the $QR decomposition of $A into ($QR, $tau) given by gsl_linalg_QR_decomp. The solution is returned in $x. The residual is computed as a by-product and stored in residual. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_QRsolve($Q, $R, $b, $x) - This function solves the system $R $x = $Q**T $b for $x. It can be used when the $QR decomposition of a matrix is available in unpacked form as ($Q, $R). The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_Rsolve($QR, $b, $x) - This function solves the triangular system R $x = $b for $x. It may be useful if the product b' = Q^T b has already been computed using gsl_linalg_QR_QTvec.
gsl_linalg_QR_Rsvx($QR, $x) - This function solves the triangular system R $x = b for $x in-place. On input $x should contain the right-hand side b and is replaced by the solution on output. This function may be useful if the product b' = Q^T b has already been computed using gsl_linalg_QR_QTvec. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_update($Q, $R, $b, $x) - This function performs a rank-1 update $w $v**T of the QR decomposition ($Q, $R). The update is given by Q'R' = Q R + w v^T where the output matrices Q' and R' are also orthogonal and right triangular. Note that w is destroyed by the update. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_QTvec($QR, $tau, $v) - This function applies the matrix Q^T encoded in the decomposition ($QR,$tau) to the vector $v, storing the result Q^T v in $v. The matrix multiplication is carried out directly using the encoding of the Householder vectors without needing to form the full matrix Q^T. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_Qvec($QR, $tau, $v) - This function applies the matrix Q encoded in the decomposition ($QR,$tau) to the vector $v, storing the result Q v in $v. The matrix multiplication is carried out directly using the encoding of the Householder vectors without needing to form the full matrix Q. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_QTmat($QR, $tau, $A) - This function applies the matrix Q^T encoded in the decomposition ($QR,$tau) to the matrix $A, storing the result Q^T A in $A. The matrix multiplication is carried out directly using the encoding of the Householder vectors without needing to form the full matrix Q^T. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QR_unpack($QR, $tau, $Q, $R) - This function unpacks the encoded QR decomposition ($QR,$tau) into the matrices $Q and $R, where $Q is M-by-M and $R is M-by-N. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_R_solve($R, $b, $x) - This function solves the triangular system $R $x = $b for the N-by-N matrix $R. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_R_svx($R, $x) - This function solves the triangular system $R $x = b in-place. On input $x should contain the right-hand side b, which is replaced by the solution on output. The function returns 0 if it succeded, 1 otherwise.
gsl_linalg_QRPT_decomp2($A, $q, $r, $tau, $p, $norm) - This function factorizes the matrix $A into the decomposition A = Q R P^T without modifying $A itself and storing the output in the separate matrices $q and $r. For the rest, it operates exactly like gsl_linalg_QRPT_decomp
gsl_linalg_QRPT_solve
gsl_linalg_QRPT_svx
gsl_linalg_QRPT_QRsolve
gsl_linalg_QRPT_Rsolve
gsl_linalg_QRPT_Rsvx
gsl_linalg_QRPT_update
gsl_linalg_LQ_decomp
gsl_linalg_LQ_solve_T
gsl_linalg_LQ_svx_T
gsl_linalg_LQ_lssolve_T
gsl_linalg_LQ_Lsolve_T
gsl_linalg_LQ_Lsvx_T
gsl_linalg_L_solve_T
gsl_linalg_LQ_vecQ
gsl_linalg_LQ_vecQT
gsl_linalg_LQ_unpack
gsl_linalg_LQ_update
gsl_linalg_LQ_LQsolve
gsl_linalg_PTLQ_decomp
gsl_linalg_PTLQ_decomp2
gsl_linalg_PTLQ_solve_T
gsl_linalg_PTLQ_svx_T
gsl_linalg_PTLQ_LQsolve_T
gsl_linalg_PTLQ_Lsolve_T
gsl_linalg_PTLQ_Lsvx_T
gsl_linalg_PTLQ_update
gsl_linalg_cholesky_decomp($A) - Factorize the symmetric, positive-definite square matrix $A into the Cholesky decomposition A = L L^T and stores it into the matrix $A. The funtcion returns 0 if the operation succeeded, 0 otherwise.
gsl_linalg_cholesky_solve($cholesky, $b, $x) - This function solves the system A x = b using the Cholesky decomposition of A into the matrix $cholesky given by gsl_linalg_cholesky_decomp. $b and $x are vectors. The funtcion returns 0 if the operation succeeded, 0 otherwise.
gsl_linalg_cholesky_svx($cholesky, $x) - This function solves the system A x = b in-place using the Cholesky decomposition of A into the matrix $cholesky given by gsl_linalg_cholesky_decomp. On input the vector $x should contain the right-hand side b, which is replaced by the solution on output. The funtcion returns 0 if the operation succeeded, 0 otherwise.
gsl_linalg_cholesky_decomp_unit
gsl_linalg_complex_cholesky_decomp($A) - Factorize the symmetric, positive-definite square matrix $A which contains complex numbers into the Cholesky decomposition A = L L^T and stores it into the matrix $A. The funtcion returns 0 if the operation succeeded, 0 otherwise.
gsl_linalg_complex_cholesky_solve($cholesky, $b, $x) - This function solves the system A x = b using the Cholesky decomposition of A into the matrix $cholesky given by gsl_linalg_complex_cholesky_decomp. $b and $x are vectors. The funtcion returns 0 if the operation succeeded, 0 otherwise.
gsl_linalg_complex_cholesky_svx($cholesky, $x) - This function solves the system A x = b in-place using the Cholesky decomposition of A into the matrix $cholesky given by gsl_linalg_complex_cholesky_decomp. On input the vector $x should contain the right-hand side b, which is replaced by the solution on output. The funtcion returns 0 if the operation succeeded, 0 otherwise.
gsl_linalg_symmtd_decomp($A, $tau) - This function factorizes the symmetric square matrix $A into the symmetric tridiagonal decomposition Q T Q^T. On output the diagonal and subdiagonal part of the input matrix $A contain the tridiagonal matrix T. The remaining lower triangular part of the input matrix contains the Householder vectors which, together with the Householder coefficients $tau, encode the orthogonal matrix Q. This storage scheme is the same as used by lapack. The upper triangular part of $A is not referenced. $tau is a vector.
gsl_linalg_symmtd_unpack($A, $tau, $Q, $diag, $subdiag) - This function unpacks the encoded symmetric tridiagonal decomposition ($A, $tau) obtained from gsl_linalg_symmtd_decomp into the orthogonal matrix $Q, the vector of diagonal elements $diag and the vector of subdiagonal elements $subdiag.
gsl_linalg_symmtd_unpack_T($A, $diag, $subdiag) - This function unpacks the diagonal and subdiagonal of the encoded symmetric tridiagonal decomposition ($A, $tau) obtained from gsl_linalg_symmtd_decomp into the vectors $diag and $subdiag.
gsl_linalg_hermtd_decomp($A, $tau) - This function factorizes the hermitian matrix $A into the symmetric tridiagonal decomposition U T U^T. On output the real parts of the diagonal and subdiagonal part of the input matrix $A contain the tridiagonal matrix T. The remaining lower triangular part of the input matrix contains the Householder vectors which, together with the Householder coefficients $tau, encode the orthogonal matrix Q. This storage scheme is the same as used by lapack. The upper triangular part of $A and imaginary parts of the diagonal are not referenced. $A is a complex matrix and $tau a complex vector.
gsl_linalg_hermtd_unpack($A, $tau, $U, $diag, $subdiag) - This function unpacks the encoded tridiagonal decomposition ($A, $tau) obtained from gsl_linalg_hermtd_decomp into the unitary complex matrix $U, the real vector of diagonal elements $diag and the real vector of subdiagonal elements $subdiag.
gsl_linalg_hermtd_unpack_T($A, $diag, $subdiag) - This function unpacks the diagonal and subdiagonal of the encoded tridiagonal decomposition (A, tau) obtained from the gsl_linalg_hermtd_decomp into the real vectors $diag and $subdiag.
gsl_linalg_HH_solve($a, $b, $x) - This function solves the system $A $x = $b directly using Householder transformations where $A is a matrix, $b and $x vectors. On output the solution is stored in $x and $b is not modified. $A is destroyed by the Householder transformations.
gsl_linalg_HH_svx($A, $x) - This function solves the system $A $x = b in-place using Householder transformations where $A is a matrix, $b is a vector. On input $x should contain the right-hand side b, which is replaced by the solution on output. The matrix $A is destroyed by the Householder transformations.
gsl_linalg_solve_symm_tridiag
gsl_linalg_solve_tridiag
gsl_linalg_solve_symm_cyc_tridiag
gsl_linalg_solve_cyc_tridiag
gsl_linalg_bidiag_decomp
gsl_linalg_bidiag_unpack
gsl_linalg_bidiag_unpack2
gsl_linalg_bidiag_unpack_B
gsl_linalg_balance_matrix
gsl_linalg_balance_accum
gsl_linalg_balance_columns
You have to add the functions you want to use inside the qw /put_funtion_here / with spaces between each function. You can also write use Math::GSL::Complex qw/:all/ to use all avaible functions of the module.

For more informations on the functions, we refer you to the GSL offcial documentation: http://www.gnu.org/software/gsl/manual/html_node/ Tip : search on google: site:http://www.gnu.org/software/gsl/manual/html_node/ name_of_the_function_you_want

EXAMPLES

This example shows how to compute the determinant of a matrix with the LU decomposition:

use Math::GSL::Matrix qw/:all/;
use Math::GSL::Permutation qw/:all/;
use Math::GSL::Linalg qw/:all/;

my $Matrix = gsl_matrix_alloc(4,4);
map { gsl_matrix_set($Matrix, 0, $_, $_+1) } (0..3);

gsl_matrix_set($Matrix,1, 0, 2);
gsl_matrix_set($Matrix, 1, 1, 3);
gsl_matrix_set($Matrix, 1, 2, 4);
gsl_matrix_set($Matrix, 1, 3, 1);

gsl_matrix_set($Matrix, 2, 0, 3);
gsl_matrix_set($Matrix, 2, 1, 4);
gsl_matrix_set($Matrix, 2, 2, 1);
gsl_matrix_set($Matrix, 2, 3, 2);

gsl_matrix_set($Matrix, 3, 0, 4);
gsl_matrix_set($Matrix, 3, 1, 1);
gsl_matrix_set($Matrix, 3, 2, 2);
gsl_matrix_set($Matrix, 3, 3, 3);
   
my $permutation = gsl_permutation_alloc(4);
gsl_permutation_init($permutation);
my ($result, $signum) = gsl_linalg_LU_decomp($Matrix, $permutation);
my $det = gsl_linalg_LU_det($Matrix, $signum);
print "The value of the determinant of the matrix is $det \n";

AUTHORS

Jonathan Leto <jonathan@leto.net> and Thierry Moisan <thierry.moisan@gmail.com>

COPYRIGHT AND LICENSE

Copyright (C) 2008-2009 Jonathan Leto and Thierry Moisan

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.