NAME

Math::Polygon - Class for maintaining polygon data

SYNOPSIS

my $poly = Math::Polygon->new( [1,2], [2,4], [5,7], [1,2] );
print $poly->nrPoints;
my @p    = $poly->points;

my ($xmin, $ymin, $xmax, $ymax) = $poly->bbox;

my $area   = $poly->area;
my $l      = $poly->perimeter;
if($poly->isClockwise) { ... };

my $rot    = $poly->startMinXY;
my $center = $poly->centroid;
if($poly->contains($point)) { ... };

my $boxed  = $poly->lineClip($xmin, $xmax, $ymin, $ymax);

DESCRIPTION

This class provides an OO interface around Math::Polygon::Calc and Math::Polygon::Clip.

METHODS

Constructors

$obj->new([OPTIONS], [POINTS], [OPTIONS])

Math::Polygon->new([OPTIONS], [POINTS], [OPTIONS])

You may add OPTIONS after and/or before the POINTS. You may also use the "points" options to get the points listed. POINTS are references to an ARRAY of X and Y.

When new is called as instance method, it is believed that the new polygon is derived from the callee, and therefore some facts (like clockwise or anti-clockwise direction) will get copied unless overruled.

-Option   --Default
 bbox       undef
 clockwise  undef
 points     undef

bbox => ARRAY: Usually computed from the figure automatically, but can also be specified as [xmin,ymin,xmax, ymax]. See bbox().
clockwise => BOOLEAN: Is not specified, it will be computed by the isClockwise() method on demand.
points => ARRAY-OF-POINTS: See points() and nrPoints().

example: creation of new polygon

my $p = Math::Polygon->new([1,0],[1,1],[0,1],[0,0],[1,0]);

my @p = ([1,0],[1,1],[0,1],[0,0],[1,0]);
my $p = Math::Polygon->new(points => \@p);

Attributes

$obj->nrPoints: Returns the number of points,
$obj->order: Returns the number of uniqe points: one less than nrPoints().
$obj->point(INDEX, [INDEX, ...]): Returns the point with the specified INDEX or INDEXES. In SCALAR context, only the first INDEX is used.
$obj->points: In LIST context, the points are returned as list, otherwise as reference to an ARRAY.

Geometry

$obj->area

Returns the area enclosed by the polygon. The last point of the list must be the same as the first to produce a correct result. The computed result is cached. Function Math::Polygon::Calc::polygon_area().

$obj->bbox

Returns a list with four elements: (xmin, ymin, xmax, ymax), which describe the bounding box of the polygon (all points of the polygon are inside that area). The computation is expensive, and therefore, the results are cached. Function Math::Polygon::Calc::polygon_bbox().

$obj->beautify(OPTIONS)

Returns a new, beautified version of this polygon. Function Math::Polygon::Calc::polygon_beautify().

Polygons, certainly after some computations, can have a lot of horrible artifacts: points which are double, spikes, etc. This functions provided by this module beautify

-Option       --Default
 remove_spikes  <false>

remove_spikes => BOOLEAN

$obj->centroid

Returns the centroid location of the polygon. The last point of the list must be the same as the first to produce a correct result. The computed result is cached. Function Math::Polygon::Calc::polygon_centroid().

$obj->clockwise

Make sure the points are in clockwise order.

$obj->contains(POINT)

Returns a truth value indicating whether the point is inside the polygon or not. On the edge is inside.

$obj->counterClockwise

Make sure the points are in counter-clockwise order.

$obj->equal((OTHER|ARRAY, [TOLERANCE])|POINTS)

Compare two polygons, on the level of points. When the polygons are the same but rotated, this will return false. See same(). Function Math::Polygon::Calc::polygon_equal().

$obj->isClockwise

The points are (in majority) orded in the direction of the hands of the clock. This calculation is quite expensive (same effort as calculating the area of the polygon), and the result is therefore cached.

$obj->isClosed

Returns true if the first point of the poly definition is the same as the last point.

$obj->perimeter

The length of the line of the polygon. This can also be used to compute the length of any line: of the last point is not equal to the first, then a line is presumed; for a polygon they must match. Function Math::Polygon::Calc::polygon_perimeter().

$obj->same((OTHER|ARRAY, [TOLERANCE])|POINTS)

Compare two polygons, where the polygons may be rotated wrt each other. This is (much) slower than equal(), but some algorithms will cause un unpredictable rotation in the result. Function Math::Polygon::Calc::polygon_same().

$obj->startMinXY

Returns a new polygon object, where the points are rotated in such a way that the point which is losest to the left-bottom point of the bouding box has become the first.

Function Math::Polygon::Calc::polygon_start_minxy().

Transformations

Implemented in Math::Polygon::Transform: changes on the structure of the polygon except clipping. All functions return a new polygon object or undef.

$obj->grid(OPTIONS)

Returns a polygon object with the points snapped to grid points. See Math::Polygon::Transform::polygon_grid().

-Option--Default
 raster  1.0

raster => FLOAT: The raster size, which determines the points to round to. The origin [0,0] is always on a grid-point. When the raster value is zero, no transformation will take place.

$obj->mirror(OPTIONS)

Mirror the polygon in a line. Only one of the options can be provided. Some programs call this "flip" or "flop".

-Option--Default
 b       0
 line    <undef>
 rc      undef
 x       undef
 y       undef

b => FLOAT: Only used in combination with option rc to describe a line.
line => [POINT, POINT]: Alternative way to specify the mirror line. The rc and b are computed from the two points of the line.
rc => FLOAT: Description of the line which is used to mirror in. The line is y= rc*x+b. The rc equals -dy/dx, the firing angle. If undef is explicitly specified then b is used as constant x: it's a vertical mirror.
x => FLOAT: Mirror in the line x=value, which means that y stays unchanged.
y => FLOAT: Mirror in the line y=value, which means that x stays unchanged.

$obj->move(OPTIONS)

Returns a moved polygon object: all point are moved over the indicated distance. See Math::Polygon::Transform::polygon_move().

-Option--Default
 dx      0
 dy      0

dx => FLOAT: Displacement in the horizontal direction.
dy => FLOAT: Displacement in the vertical direction.

$obj->resize(OPTIONS)

Returns a resized polygon object. See Math::Polygon::Transform::polygon_resize().

-Option--Default
 center  [0,0]
 scale   1.0
 xscale  <scale>
 yscale  <scale>

center => POINT
scale => FLOAT: Resize the polygon with the indicated factor. When the factor is larger than 1, the resulting polygon with grow, when small it will be reduced in size. The scale will be respective from the center.
xscale => FLOAT: Specific scaling factor in the horizontal direction.
yscale => FLOAT: Specific scaling factor in the vertical direction.

$obj->rotate(OPTIONS)

Returns a rotated polygon object: all point are moved over the indicated distance. See Math::Polygon::Transform::polygon_rotate().

-Option --Default
 center   [0,0]
 degrees  0
 radians  0

center => POINT
degrees => FLOAT: specify rotation angle in degrees (between -180 and 360).
radians => FLOAT: specify rotation angle in rads (between -pi and 2*pi)

$obj->simplify(OPTIONS)

Returns a polygon object where points are removed. See Math::Polygon::Transform::polygon_simplify().

-Option    --Default
 max_points  undef
 same        0.0001
 slope       undef

max_points => INTEGER

First, same and slope reduce the number of points. Then, if there are still more than the specified number of points left, the points with the widest angles will be removed until the specified maximum number is reached.

same => FLOAT

The distance between two points to be considered "the same" point. The value is used as radius of the circle.

slope => FLOAT

With three points X(n),X(n+1),X(n+2), the point X(n+1) will be removed if the length of the path over all three points is less than slope longer than the direct path between X(n) and X(n+2).

The slope will not be removed around the starting point of the polygon. Removing points will change the area of the polygon.

Clipping

$obj->fillClip1(BOX)

Clipping a polygon into rectangles can be done in various ways. With this algorithm, the parts of the polygon which are outside the BOX are mapped on the borders. The polygon stays in one piece, but may have vertices which are followed in two directions.

Returned is one polygon, which is cleaned from double points, spikes and superfluous intermediate points, or undef when no polygon is outside the BOX. Function Math::Polygon::Clip::polygon_fill_clip1().

$obj->lineClip(BOX)

Returned is a list of ARRAYS-OF-POINTS containing line pieces from the input polygon. Function Math::Polygon::Clip::polygon_line_clip().

Display

$obj->string

LICENSE

Copyrights 2004,2006-2011 by Mark Overmeer. For other contributors see ChangeLog.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See http://www.perl.com/perl/misc/Artistic.html

To install Math::Polygon, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Math::Polygon

CPAN shell

perl -MCPAN -e shell
install Math::Polygon

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)