NAME

netdisco-do - Run any Netdisco poller job from the command-line.

USAGE

~/bin/netdisco-do <action> [-D] [-d <device> [-p <port>] [-e <extra>]]

Regardless of Netdisco configuration, debug level logging is enabled if the -D flag is given.

DESCRIPTION

This program allows you to run any Netdisco poller job from the command-line.

Note that some jobs (discoverall, macwalk, arpwalk) simply add entries to the Netdisco job queue for other jobs, so won't seem to do much when you trigger them.

ACTIONS

discover

Run a discover on the device (specified with -d).

macsuck

Run a macsuck on the device (specified with -d).

arpnip

Run an arpnip on the device (specified with -d).

set_location

Set the SNMP location field on the device (specified with -d). Pass the location string in the -e extra parameter.

set_contact

Set the SNMP contact field on the device (specified with -d). Pass the contact name in the -e extra parameter.

set_portname

Set the description on a device port. Requires the -d parameter (device), -p parameter (port), and -e parameter (description).

set_portcontrol

Set the up/down status on a device port. Requires the -d parameter (device), -p parameter (port), and -e parameter ("up" or "down").

set_vlan

Set the native VLAN on a device port. Requires the -d parameter (device), -p parameter (port), and -e parameter (VLAN number).

set_power

Set the PoE on/off status on a device port. Requires the -d parameter (device), -p parameter (port), and -e parameter ("true" or "false").