/ 
SNMP-Info-3.20
River stage one • 1 direct dependent • 1 total dependent
/ SNMP::Info::Layer2::HP

NAME

SNMP::Info::Layer2::HP - SNMP Interface to HP Procurve Switches

AUTHOR

Max Baker

SYNOPSIS

# Let SNMP::Info determine the correct subclass for you. 
my $hp = new SNMP::Info(
                         AutoSpecify => 1,
                         Debug       => 1,
                         DestHost    => 'myswitch',
                         Community   => 'public',
                         Version     => 2
                       ) 
   or die "Can't connect to DestHost.\n";

my $class      = $hp->class();
print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

Provides abstraction to the configuration information obtainable from a HP ProCurve Switch via SNMP.

Note: Some HP Switches will connect via SNMP version 1, but a lot of config data will not be available. Make sure you try and connect with Version 2 first, and then fail back to version 1.

For speed or debugging purposes you can call the subclass directly, but not after determining a more specific class using the method above.

my $hp = new SNMP::Info::Layer2::HP(...);

Inherited Classes

SNMP::Info::Layer2
SNMP::Info::LLDP
SNMP::Info::MAU

Required MIBs

RFC1271-MIB

Included in V2 mibs from Cisco

HP-ICF-OID

(this MIB new with SNMP::Info 0.8)

STATISTICS-MIB
NETSWITCH-MIB
CONFIG-MIB
HP-ICF-BRIDGE
HP-ICF-POE-MIB

The last four MIBs listed are from HP and can be found at http://www.hp.com/rnd/software or http://www.hp.com/rnd/software/MIBs.htm

Change Log

Version 0.4 - Removed ENTITY-MIB e_*() methods to separate sub-class - SNMP::Info::Entity

GLOBALS

These are methods that return scalar value from SNMP

$hp->cpu()

Returns CPU Utilization in percentage.

$hp->log()

Returns all the log entries from the switch's log that are not Link up or down messages.

$hp->mem_free()

Returns bytes of free memory

$hp->mem_total()

Return bytes of total memory

$hp->mem_used()

Returns bytes of used memory

$hp->model()

Returns the model number of the HP Switch. Will translate between the HP Part number and the common model number with this map :

%MODEL_MAP = (
   'J8131A' => 'WAP-420-WW',
   'J8130A' => 'WAP-420-NA',
   'J8133A' => 'AP520WL',
   'J8680A' => '9408sl',
   'J9091A' => '8212zl',
   'J9475A' => '8206zl',
   'J9265A' => '6600ml-24XG',
   'J9264A' => '6600ml-24G-4XG',
   'J9263A' => '6600ml-24G',
   'J9452A' => '6600-48G-4XG',
   'J9451A' => '6600-48G',
   'J8474A' => '6410cl-6XG',
   'J8433A' => '6400cl-6XG',
   'J8992A' => '6200yl-24G',
   'J4902A' => '6108',
   'J8698A' => '5412zl',
   'J8719A' => '5408yl',
   'J8697A' => '5406zl',
   'J8718A' => '5404yl',
   'J4819A' => '5308XL',
   'J4850A' => '5304XL',
   'J8773A' => '4208vl',
   'J8770A' => '4204vl',
   'J8772A' => '4202vl-72',
   'J9032A' => '4202vl-68G',
   'J9031A' => '4202vl-68',
   'J8771A' => '4202vl-48G',
   'J4865A' => '4108GL',
   'J4887A' => '4104GL',
   'J9588A' => '3800-48G-PoE+-4XG',
   'J9574A' => '3800-48G-PoE+-4SFP+',
   'J9586A' => '3800-48G-4XG',
   'J9576A' => '3800-48G-4SFP+',
   'J9584A' => '3800-24SFP-2SFP+',
   'J9587A' => '3800-24G-PoE+-2XG',
   'J9573A' => '3800-24G-PoE+-2SFP+',
   'J9585A' => '3800-24G-2XG',
   'J9575A' => '3800-24G-2SFP+',
   'J8693A' => '3500yl-48G-PWR',
   'J8692A' => '3500yl-24G-PWR',
   'J9473A' => '3500-48-PoE',
   'J9472A' => '3500-48',
   'J9471A' => '3500-24-PoE',
   'J9470A' => '3500-24',
   'J4906A' => '3400cl-48G',
   'J4905A' => '3400cl-24G',
   'J4815A' => '3324XL',
   'J4851A' => '3124',
   'J9562A' => '2915-8G-PoE',
   'J9148A' => '2910al-48G-PoE+',
   'J9147A' => '2910al-48G',
   'J9146A' => '2910al-24G-PoE+',
   'J9145A' => '2910al-24G',
   'J9050A' => '2900-48G',
   'J9049A' => '2900-24G',
   'J4904A' => '2848',
   'J4903A' => '2824',
   'J9022A' => '2810-48G',
   'J9021A' => '2810-24G',
   'J8165A' => '2650-PWR',
   'J4899B' => '2650-CR',
   'J4899C' => '2650C',
   'J4899A' => '2650',
   'J8164A' => '2626-PWR',
   'J4900B' => '2626-CR',
   'J4900C' => '2626C',
   'J4900A' => '2626',
   'J9627A' => '2620-48-PoE+',
   'J9626A' => '2620-48',
   'J9624A' => '2620-24-PPoE+',
   'J9625A' => '2620-24-PoE+',
   'J9623A' => '2620-24',
   'J9565A' => '2615-8-PoE',
   'J9089A' => '2610-48-PWR',
   'J9088A' => '2610-48',
   'J9087A' => '2610-24-PWR',
   'J9086A' => '2610-24/12PWR',
   'J9085A' => '2610-24',
   'J8762A' => '2600-8-PWR',
   'J4813A' => '2524',
   'J9298A' => '2520G-8-PoE',
   'J9299A' => '2520G-24-PoE',
   'J9137A' => '2520-8-PoE',
   'J9138A' => '2520-24-PoE',
   'J4812A' => '2512',
   'J9280A' => '2510G-48',
   'J9279A' => '2510G-24',
   'J9020A' => '2510-48A',
   'J9019B' => '2510-24B',
   'J9019A' => '2510-24A',
   'J4818A' => '2324',
   'J4817A' => '2312',
   'J9449A' => '1810G-8',
   'J9450A' => '1810G-24',
   'J9029A' => '1800-8G',
   'J9028A' => '1800-24G',
);
$hp->os()

Returns hp

$hp->os_bin()

hpSwitchRomVersion.0

$hp->os_ver()

Tries to use os_version() and if that fails will try and cull the version from the description field.

$hp->os_version()

hpSwitchOsVersion.0

$hp->serial()

Returns serial number if available through SNMP

$hp->slots()

Returns number of entries in $hp->e_name that have 'slot' in them.

$hp->vendor()

hp

$hp->fan()

Returns fan status

$hp->ps1_status()

Power supply 1 status

$hp->ps2_status()

Power supply 2 status

$hp->peth_port_power()

Power supplied by PoE ports, in milliwatts (hpicfPoePethPsePortPower)

$hp->stp_ver()

Returns what version of STP the device is running. (hpicfBridgeRstpForceVersion with fallback to inherited stp_ver())

$hp->qb_fw_vlan()

Returns reference to hash of forwarding table entries VLAN ID

(dot1qFdbId), (rcBridgeTpFdbVlanId)

Globals imported from SNMP::Info::Layer2

See documentation in "GLOBALS" in SNMP::Info::Layer2 for details.

Globals imported from SNMP::Info::LLDP

See documentation in "GLOBALS" in SNMP::Info::LLDP for details.

Globals imported from SNMP::Info::MAU

See documentation in "GLOBALS" in SNMP::Info::MAU for details.

TABLE METHODS

These are methods that return tables of information in the form of a reference to a hash.

Overrides

$hp->interfaces()

Uses $hp->i_description()

$hp->i_duplex()

Returns reference to map of IIDs to current link duplex.

$hp->i_duplex_admin()

Returns reference to hash of IIDs to admin duplex setting.

$hp->vendor_i_type()

Returns reference to hash of IIDs to HP specific port type (hpSwitchPortType).

$hp->i_name()

Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()

$hp->peth_port_ifindex()

Returns reference to hash of power Ethernet port table entries map back to interface index (c<ifIndex>)

agg_ports

Returns a HASH reference mapping from slave to master port for each member of a port bundle on the device. Keys are ifIndex of the slave ports, Values are ifIndex of the corresponding master ports.

Table Methods imported from SNMP::Info::Layer2

See documentation in "TABLE METHODS" in SNMP::Info::Layer2 for details.

Table Methods imported from SNMP::Info::LLDP

See documentation in "TABLE METHODS" in SNMP::Info::LLDP for details.

Table Methods imported from SNMP::Info::MAU

See documentation in "TABLE METHODS" in SNMP::Info::MAU for details.

MUNGES

munge_hp_c_id()

Munge for c_id which handles CDP and LLDP.

SET METHODS

These are methods that provide SNMP set functionality for overridden methods or provide a simpler interface to complex set operations. See "SETTING DATA VIA SNMP" in SNMP::Info for general information on set operations.

set_i_vlan()
set_i_vlan_tagged()