/ 
IO-Termios-0.10
River stage one • 6 direct dependents • 7 total dependents
/ IO::Termios

NAME

IO::Termios - supply termios(3) methods to IO::Handle objects

SYNOPSIS

use IO::Termios;

my $term = IO::Termios->open( "/dev/ttyS0", "9600,8,n,1" )
   or die "Cannot open ttyS0 - $!";

$term->print( "Hello world\n" ); # Still an IO::Handle

while( <$term> ) {
   print "A line from ttyS0: $_";
}

DESCRIPTION

This class extends the generic IO::Handle object class by providing methods which access the system's terminal control termios(3) operations. These methods are primarily of interest when dealing with TTY devices, including serial ports.

The flag-setting methods will apply to any TTY device, such as a pseudo-tty, and are useful for controlling such flags as the ECHO flag, to disable local echo.

my $stdin = IO::Termios->new( \*STDIN );
$stdin->setflag_echo( 0 );

When dealing with a serial port the line mode method is useful for setting the basic serial parameters such as baud rate, and the modem line control methods can be used to access the hardware handshaking lines.

my $ttyS0 = IO::Termios->open( "/dev/ttyS0" );
$ttyS0->set_mode( "19200,8,n,1" );
$ttyS0->set_modem({ dsr => 1, cts => 1 });

Upgrading STDIN/STDOUT/STDERR

If you pass the -upgrade option at import time, any of STDIN, STDOUT or STDERR that are found to be TTY wrappers are automatically upgraded into IO::Termios instances.

use IO::Termios -upgrade;

STDIN->setflag_echo(0);

Arbitrary Baud Rates on Linux

Linux supports a non-POSIX extension to the usual termios interface, which allows arbitrary baud rates to be set. IO::Termios can automatically make use of this ability if the Linux::Termios2 module is installed. If so, this will be used automatically and transparently, to allow the set*baud methods to set any rate allowed by the kernel/driver. If not, then only the POSIX-compatible rates may be used.

CONSTRUCTORS

new

$term = IO::Termios->new();

Construct a new IO::Termios object around the terminal for the program. This is found by checking if any of STDIN, STDOUT or STDERR are a terminal. The first one that's found is used. An error occurs if no terminal can be found by this method.

new (handle)

$term = IO::Termios->new( $handle );

Construct a new IO::Termios object around the given filehandle.

open

$term = IO::Termios->open( $path, $modestr, $flags );

Open the given path, and return a new IO::Termios object around the filehandle. If the open call fails, undef is returned.

If $modestr is provided, the constructor will pass it to the set_mode method before returning.

If $flags is provided, it will be passed on to the underlying sysopen() call used to open the filehandle. It should contain a bitwise-or combination of O_* flags from the Fcntl module - for example O_NOCTTY or O_NDELAY. The value O_RDWR will be added to this; the caller does not need to specify it directly. For example:

use Fcntl qw( O_NOCTTY O_NDELAY );

$term = IO::Termios->open( "/dev/ttyS0", O_NOCTTY|O_NDELAY );
$term->setflag_clocal( 1 );
$term->blocking( 1 );

METHODS

getattr

$attrs = $term->getattr;

Makes a tcgetattr() call on the underlying filehandle, and returns a IO::Termios::Attrs object.

If the tcgetattr() call fails, undef is returned.

setattr

$term->setattr( $attrs );

Makes a tcsetattr() call on the underlying file handle, setting attributes from the given IO::Termios::Attrs object.

If the tcsetattr() call fails, undef is returned. Otherwise, a true value is returned.

set_mode

get_mode

$term->set_mode( $modestr );

$modestr = $term->get_mode;

Accessor for the derived "mode string", which is a comma-joined concatenation of the baud rate, character size, parity mode, and stop size in a format such as

19200,8,n,1

When setting the mode string, trailing components may be omitted meaning their value will not be affected.

tiocmget

tiocmset

$bits = $term->tiocmget;

$term->tiocmset( $bits );

Accessor for the modem line control bits. Takes or returns a bitmask of values.

tiocmbic

tiocmbis

$term->tiocmbic( $bits );

$term->tiocmbis( $bits );

Bitwise mutator methods for the modem line control bits. tiocmbic will clear just the bits provided and leave the others unchanged; tiocmbis will set them.

get_modem

$flags = $term->get_modem;

Returns a hash reference containing named flags corresponding to the modem line control bits. Any bit that is set will yield a key in the returned hash of the same name. The bit names are

dtr dsr rts cts cd ri

set_modem

$term->set_modem( $flags );

Changes the modem line control bit flags as given by the hash reference. Each bit to be changed should be represented by a key in the $flags hash of the names given above. False values will be cleared, true values will be set. Other flags will not be altered.

getmodem_BIT

setmodem_BIT

$set = $term->getmodem_BIT;

$term->setmodem_BIT( $set );

Accessor methods for each of the modem line control bits. A set of methods exists for each of the named modem control bits given above.

FLAG-ACCESSOR METHODS

Theses methods are implemented in terms of the lower level methods, but provide an interface which is more abstract, and easier to re-implement on other non-POSIX systems. These should be used in preference to the lower ones.

For efficiency, when getting or setting a large number of flags, it may be more efficient to call getattr, then operate on the returned object, before possibly passing it to setattr. The returned IO::Termios::Attrs object supports the same methods as documented here.

The following two sections of code are therefore equivalent, though the latter is more efficient as it only calls setattr once.

$term->setbaud( 38400 );
$term->setcsize( 8 );
$term->setparity( 'n' );
$term->setstop( 1 );

my $attrs = $term->getattr;
$attrs->setbaud( 38400 );
$attrs->setcsize( 8 );
$attrs->setparity( 'n' );
$attrs->setstop( 1 );
$term->setattr( $attrs );

However, a convenient shortcut method is provided for the common case of setting the baud rate, character size, parity and stop size all at the same time. This is set_mode:

$term->set_mode( "38400,8,n,1" );

getibaud

getobaud

setibaud

setobaud

setbaud

$baud = $term->getibaud;

$baud = $term->getobaud;

$term->setibaud( $baud );

$term->setobaud( $baud );

$term->setbaud( $baud );

Convenience accessors for the ispeed and ospeed. $baud is an integer directly giving the line rate, instead of one of the Bnnn constants.

getcsize

setcsize

$bits = $term->getcsize;

$term->setcsize( $bits );

Convenience accessor for the CSIZE bits of c_cflag. $bits is an integer 5 to 8.

getparity

setparity

$parity = $term->getparity;

$term->setparity( $parity );

Convenience accessor for the PARENB and PARODD bits of c_cflag. $parity is n, o or e.

getstop

setstop

$stop = $term->getstop;

$term->setstop( $stop );

Convenience accessor for the CSTOPB bit of c_cflag. $stop is 1 or 2.

cfmakeraw

$term->cfmakeraw;

Since version 0.07.

Adjusts several bit flags to put the terminal into a "raw" mode. Input is available a character at a time, echo is disabled, and all special processing of input and output characters is disabled.

getflag_FLAG

setflag_FLAG

$mode = $term->getflag_FLAG;

$term->setflag_FLAG( $mode );

Accessors for various control flags. The following methods are defined for specific flags:

inlcr

Since version 0.09.

The INLCR bit of the c_iflag. This translates NL to CR on input.

igncr

Since version 0.09.

The IGNCR bit of the c_iflag. This ignores incoming CR characters.

icrnl

Since version 0.09.

The ICRNL bit of the c_iflag. This translates CR to NL on input, unless IGNCR is also set.

ignbrk

Since version 0.09.

The IGNBRK bit of the c_iflag. This controls whether incoming break conditions are ignored entirely.

brkint

Since version 0.09.

The BRKINT bit of the c_iflag. This controls whether non-ignored incoming break conditions result in a SIGINT signal being delivered to the process. If not, such a condition reads as a nul byte.

parmrk

Since version 0.09.

The PARMRK bit of the c_iflag. This controls how parity errors and break conditions are handled.

opost

Since version 0.07.

The OPOST bit of the c_oflag. This enables system-specific post-processing on output.

cread

The CREAD bit of the c_cflag. This enables the receiver.

hupcl

The HUPCL bit of the c_cflag. This lowers the modem control lines after the last process closes the device.

clocal

The CLOCAL bit of the c_cflag. This controls whether local mode is enabled; which if set, ignores modem control lines.

icanon

The ICANON bit of c_lflag. This is called "canonical" mode and controls whether the terminal's line-editing feature will be used to return a whole line (if true), or if individual bytes from keystrokes will be returned as they are available (if false).

echo

The ECHO bit of c_lflag. This controls whether input characters are echoed back to the terminal.

setflags

$term->setflags( @flags );

Since version 0.09.

A convenient wrapper to calling multiple flag setting methods in a sequence.

Each flag is specified by name, in lower case, prefixed by either a + symbol to enable it, or - to disable. For example:

$term->setflags( "+igncr", "+opost", "+clocal", "-echo" );

TODO

  • Adding more getflag_*/setflag_* convenience wrappers

SEE ALSO

  • IO::Tty - Import Tty control constants

AUTHOR

Paul Evans <leonerd@leonerd.org.uk>