/ 
POE-1.283
River stage three • 402 direct dependents • 539 total dependents
/ POE::NFA

NAME

POE::NFA - an event-driven state machine (nondeterministic finite automaton)

SYNOPSIS

use POE::Kernel;
use POE::NFA;
use POE::Wheel::ReadLine;

# Spawn an NFA and enter its initial state.
POE::NFA->spawn(
  inline_states => {
    initial => {
      setup => \&setup_stuff,
    },
    state_login => {
      on_entry => \&login_prompt,
      on_input => \&save_login,
    },
    state_password => {
      on_entry => \&password_prompt,
      on_input => \&check_password,
    },
    state_cmd => {
      on_entry => \&command_prompt,
      on_input => \&handle_command,
    },
  },
)->goto_state(initial => "setup");

POE::Kernel->run();
exit;

sub setup_stuff {
  $_[RUNSTATE]{io} = POE::Wheel::ReadLine->new(
    InputEvent => 'on_input',
  );
  $_[MACHINE]->goto_state(state_login => "on_entry");
}

sub login_prompt { $_[RUNSTATE]{io}->get('Login: '); }

sub save_login {
  $_[RUNSTATE]{login} = $_[ARG0];
  $_[MACHINE]->goto_state(state_password => "on_entry");
}

sub password_prompt { $_[RUNSTATE]{io}->get('Password: '); }

sub check_password {
  if ($_[RUNSTATE]{login} eq $_[ARG0]) {
    $_[MACHINE]->goto_state(state_cmd => "on_entry");
  }
  else {
    $_[MACHINE]->goto_state(state_login => "on_entry");
  }
}

sub command_prompt { $_[RUNSTATE]{io}->get('Cmd: '); }

sub handle_command {
  $_[RUNSTATE]{io}->put("  <<$_[ARG0]>>");
  if ($_[ARG0] =~ /^(?:quit|stop|exit|halt|bye)$/i) {
    $_[RUNSTATE]{io}->put('Bye!');
    $_[MACHINE]->stop();
  }
  else {
    $_[MACHINE]->goto_state(state_cmd => "on_entry");
  }
}

DESCRIPTION

POE::NFA implements a different kind of POE session: A non-deterministic finite automaton. Let's break that down.

A finite automaton is a state machine with a bounded number of states and transitions. Technically, POE::NFA objects may modify themselves at runtime, so they aren't really "finite". Runtime modification isn't currently supported by the API, so plausible deniability is maintained!

Deterministic state machines are ones where all possible transitions are known at compile time. POE::NFA is "non-deterministic" because transitions may change based on runtime conditions.

But more simply, POE::NFA is like POE::Session but with banks of event handlers that may be swapped according to the session's runtime state. Consider the SYNOPSIS example, which has "on_entry" and "on_input" handlers that do different things depending on the runtime state. POE::Wheel::ReadLine throws "on_input", but different things happen depending whether the session is in its "login", "password" or "command" state.

POE::NFA borrows heavily from POE::Session, so this document will only discuss the differences. Please see POE::Session for things which are similar.

PUBLIC METHODS

This document mainly focuses on the differences from POE::Session.

get_current_state

Each machine state has a name. get_current_state() returns the name of the machine's current state. get_current_state() is mainly used to retrieve the state of some other machine. It's easier (and faster) to use $_[STATE] in a machine's own event handlers.

get_runstate

get_runstate() returns the machine's current runstate. Runstates are equivalent to POE::Session HEAPs, so this method does pretty much the same as POE::Session's get_heap(). It's easier (and faster) to use $_[RUNSTATE] in a machine's own event handlers, however.

spawn STATE_NAME => HANDLERS_HASHREF[, ...]

spawn() is POE::NFA's constructor. The name reflects the idea that new state machines are spawned like threads or processes rather than instantiated like objects.

The machine itself is defined as a list of state names and hashes that map events to handlers within each state.

my %states = (
  state_1 => {
    event_1 => \&handler_1,
    event_2 => \&handler_2,
  },
  state_2 => {
    event_1 => \&handler_3,
    event_2 => \&handler_4,
  },
);

A single event may be handled by many states. The proper handler will be called depending on the machine's current state. For example, if event_1 is dispatched while the machine is in state_2, then handler_3() will be called to handle the event. The state -> event -> handler map looks like this:

$machine{state_2}{event_1} = \&handler_3;

Instead of inline_states, object_states or package_states may be used. These map the events of a state to an object or package method respectively.

object_states => {
  state_1 => [
    $object_1 => [qw(event_1 event_2)],
  ],
  state_2 => [
    $object_2 => {
      event_1 => method_1,
      event_2 => method_2,
    }
  ]
}

In the example above, in the case of event_1 coming in while the machine is in state_1, method event_1 will be called on $object_1. If the machine is in state_2, method method_1 will be called on $object_2.

package_states is very similar, but instead of using an $object, you pass in a Package::Name

The runstate parameter allows RUNSTATE to be initialized differently at instantiation time. RUNSTATE, like heaps, are usually anonymous hashrefs, but runstate may set them to be array references or even objects.

goto_state NEW_STATE[, ENTRY_EVENT[, EVENT_ARGS]]

goto_state() puts the machine into a new state. If an ENTRY_EVENT is specified, then that event will be dispatched after the machine enters the new state. EVENT_ARGS, if included, will be passed to the entry event's handler via ARG0..$#_.

# Switch to the next state.
$_[MACHINE]->goto_state( 'next_state' );

# Switch to the next state, and call a specific entry point.
$_[MACHINE]->goto_state( 'next_state', 'entry_event' );

# Switch to the next state; call an entry point with some values.
$_[MACHINE]->goto_state( 'next_state', 'entry_event', @parameters );

stop

stop() forces a machine to stop. The machine will also stop gracefully if it runs out of things to do, just like POE::Session.

stop() is heavy-handed. It will force resources to be cleaned up. However, circular references in the machine's RUNSTATE are not POE's responsibility and may cause memory leaks.

$_[MACHINE]->stop();

call_state RETURN_EVENT, NEW_STATE[, ENTRY_EVENT[, EVENT_ARGS]]

call_state() is similar to goto_state(), but it pushes the current state on a stack. At some later point, a handler can call return_state() to pop the call stack and return the machine to its old state. At that point, a RETURN_EVENT will be posted to notify the old state of the return.

$machine->call_state( 'return_here', 'new_state', 'entry_event' );

As with goto_state(), ENTRY_EVENT is the event that will be emitted once the machine enters its new state. ENTRY_ARGS are parameters passed to the ENTRY_EVENT handler via ARG0..$#_.

return_state [RETURN_ARGS]

return_state() returns to the most recent state in which call_state() was invoked. If the preceding call_state() included a return event then its handler will be invoked along with some optional RETURN_ARGS. The RETURN_ARGS will be passed to the return handler via ARG0..$#_.

$_[MACHINE]->return_state( 'success', @success_values );

Methods that match POE::Session

The following methods behave identically to the ones in POE::Session.

ID
option
postback
callback

About new() and create()

POE::NFA's constructor is spawn(), not new() or create().

PREDEFINED EVENT FIELDS

POE::NFA's predefined event fields are the same as POE::Session's with the following three exceptions.

MACHINE

MACHINE is equivalent to Session's SESSION field. It holds a reference to the current state machine, and is useful for calling its methods.

See POE::Session's SESSION field for more information.

$_[MACHINE]->goto_state( $next_state, $next_state_entry_event );

RUNSTATE

RUNSTATE is equivalent to Session's HEAP field. It holds an anonymous hash reference which POE is guaranteed not to touch. Data stored in RUNSTATE will persist between handler invocations.

STATE

STATE contains the name of the machine's current state. It is not equivalent to anything from POE::Session.

EVENT

EVENT is equivalent to Session's STATE field. It holds the name of the event which invoked the current handler. See POE::Session's STATE field for more information.

PREDEFINED EVENT NAMES

POE::NFA defines four events of its own. These events are used internally and may not be overridden by application code.

See POE::Session's "PREDEFINED EVENT NAMES" section for more information about other predefined events.

The events are: poe_nfa_goto_state, poe_nfa_push_state, poe_nfa_pop_state, poe_nfa_stop.

Yes, all the internal events begin with "poe_nfa_". More may be forthcoming, but they will always begin the same way. Therefore please do not define events beginning with "poe_nfa_".

SEE ALSO

Many of POE::NFA's features are taken directly from POE::Session. Please see POE::Session for more information.

The SEE ALSO section in POE contains a table of contents covering the entire POE distribution.

BUGS

See POE::Session's documentation.

POE::NFA is not as feature-complete as POE::Session. Your feedback is appreciated.

AUTHORS & COPYRIGHTS

Please see POE for more information about authors and contributors.