NAME
Pod::Checker, podchecker() - check pod documents for syntax errors
SYNOPSIS
use Pod::Checker;
$syntax_okay = podchecker($filepath, $outputpath, %options);
my $checker = new Pod::Checker %options;
$checker->parse_from_file($filepath, \*STDERR);OPTIONS/ARGUMENTS
$filepath is the input POD to read and $outputpath is where to write POD syntax error messages. Either argument may be a scalar indicating a file-path, or else a reference to an open filehandle. If unspecified, the input-file it defaults to \*STDIN, and the output-file defaults to \*STDERR.
podchecker()
This function can take a hash of options:
- -warnings => val
-
Turn warnings on/off. val is usually 1 for on, but higher values trigger additional warnings. See "Warnings".
DESCRIPTION
podchecker will perform syntax checking of Perl5 POD format documentation.
Curious/ambitious users are welcome to propose additional features they wish to see in Pod::Checker and podchecker and verify that the checks are consistent with perlpod.
The following checks are currently performed:
Unknown '=xxxx' commands, unknown 'X<...>' interior-sequences, and unterminated interior sequences.
Check for proper balancing of
=beginand=end. The contents of such a block are generally ignored, i.e. no syntax checks are performed.Check for proper nesting and balancing of
=over,=itemand=back.Check for same nested interior-sequences (e.g.
L<...L<...>...>).Check for malformed or nonexisting entities
E<...>.Check for correct syntax of hyperlinks
L<...>. See perlpod for details.Check for unresolved document-internal links. This check may also reveal misspelled links that seem to be internal links but should be links to something else.
DIAGNOSTICS
Errors
empty =headn
A heading (
=head1or=head2) without any text? That ain't no heading!=over on line N without closing =back
The
=overcommand does not have a corresponding=backbefore the next heading (=head1or=head2) or the end of the file.=item without previous =over
=back without previous =over
An
=itemor=backcommand has been found outside a=over/=backblock.No argument for =begin
A
=begincommand was found that is not followed by the formatter specification.=end without =begin
A standalone
=endcommand was found.Nested =begin's
There were at least two consecutive
=begincommands without the corresponding=end. Only one=beginmay be active at a time.=for without formatter specification
There is no specification of the formatter after the
=forcommand.unresolved internal link NAME
The given link to NAME does not have a matching node in the current POD. This also happend when a single word node name is not enclosed in
"".Unknown command "CMD"
An invalid POD command has been found. Valid are
=head1,=head2,=head3,=head4,=over,=item,=back,=begin,=end,=for,=pod,=cutUnknown interior-sequence "SEQ"
An invalid markup command has been encountered. Valid are:
B<>,C<>,E<>,F<>,I<>,L<>,S<>,X<>,Z<>nested commands CMD<...CMD<...>...>
Two nested identical markup commands have been found. Generally this does not make sense.
garbled entity STRING
The STRING found cannot be interpreted as a character entity.
Entity number out of range
An entity specified by number (dec, hex, oct) is out of range (1-255).
malformed link L<>
The link found cannot be parsed because it does not conform to the syntax described in perlpod.
nonempty Z<>
The
Z<>sequence is supposed to be empty.empty X<>
The index entry specified contains nothing but whitespace.
Spurious text after =pod / =cut
The commands
=podand=cutdo not take any arguments.Spurious character(s) after =back
The
=backcommand does not take any arguments.
Warnings
These may not necessarily cause trouble, but indicate mediocre style.
multiple occurrence of link target name
The POD file has some
=itemand/or=headcommands that have the same text. Potential hyperlinks to such a text cannot be unique then. This warning is printed only with warning level greater than one.line containing nothing but whitespace in paragraph
There is some whitespace on a seemingly empty line. POD is very sensitive to such things, so this is flagged. vi users switch on the list option to avoid this problem.
previous =item has no contents
There is a list
=itemright above the flagged line that has no text contents. You probably want to delete empty items.preceding non-item paragraph(s)
A list introduced by
=overstarts with a text or verbatim paragraph, but continues with=items. Move the non-item paragraph out of the=over/=backblock.=item type mismatch (one vs. two)
A list started with e.g. a bulletted
=itemand continued with a numbered one. This is obviously inconsistent. For most translators the type of the first=itemdetermines the type of the list.N unescaped
<>in paragraphAngle brackets not written as
<lt>and<gt>can potentially cause errors as they could be misinterpreted as markup commands. This is only printed when the -warnings level is greater than 1.Unknown entity
A character entity was found that does not belong to the standard ISO set or the POD specials
verbarandsol.No items in =over
The list opened with
=overdoes not contain any items.No argument for =item
=itemwithout any parameters is deprecated. It should either be followed by*to indicate an unordered list, by a number (optionally followed by a dot) to indicate an ordered (numbered) list or simple text for a definition list.empty section in previous paragraph
The previous section (introduced by a
=headcommand) does not contain any text. This usually indicates that something is missing. Note: A=head1followed immediately by=head2does not trigger this warning.Verbatim paragraph in NAME section
The NAME section (
=head1 NAME) should consist of a single paragraph with the script/module name, followed by a dash `-' and a very short description of what the thing is good for.=headn without preceding higher level
For example if there is a
=head2in the POD file prior to a=head1.
Hyperlinks
There are some warnings wrt. malformed hyperlinks.
ignoring leading/trailing whitespace in link
There is whitespace at the beginning or the end of the contents of L<...>.
(section) in '$page' deprecated
There is a section detected in the page name of L<...>, e.g.
L<passwd(2)>. POD hyperlinks may point to POD documents only. Please writeC<passwd(2)>instead. Some formatters are able to expand this to appropriate code. For links to (builtin) functions, please sayL<perlfunc/mkdir>, without ().alternative text/node '%s' contains non-escaped | or /
The characters
|and/are special in the L<...> context. Although the hyperlink parser does its best to determine which "/" is text and which is a delimiter in case of doubt, one ought to escape these literal characters like this:/ E<sol> | E<verbar>
RETURN VALUE
podchecker returns the number of POD syntax errors found or -1 if there were no POD commands at all found in the file.
EXAMPLES
See "SYNOPSIS"
INTERFACE
While checking, this module collects document properties, e.g. the nodes for hyperlinks (=headX, =item) and index entries (X<>). POD translators can use this feature to syntax-check and get the nodes in a first pass before actually starting to convert. This is expensive in terms of execution time, but allows for very robust conversions.
Since PodParser-1.24 the Pod::Checker module uses only the poderror method to print errors and warnings. The summary output (e.g. "Pod syntax OK") has been dropped from the module and has been included in podchecker (the script). This allows users of Pod::Checker to control completely the output behaviour. Users of podchecker (the script) get the well-known behaviour.
Pod::Checker->new( %options )-
Return a reference to a new Pod::Checker object that inherits from Pod::Parser and is used for calling the required methods later. The following options are recognized:
-warnings => numPrint warnings ifnumis true. The higher the value ofnum, the more warnings are printed. Currently there are only levels 1 and 2.-quiet => numIfnumis true, do not print any errors/warnings. This is useful when Pod::Checker is used to munge POD code into plain text from within POD formatters. $checker->poderror( @args )$checker->poderror( {%opts}, @args )-
Internal method for printing errors and warnings. If no options are given, simply prints "@_". The following options are recognized and used to form the output:
-msgA message to print prior to
@args.-lineThe line number the error occurred in.
-fileThe file (name) the error occurred in.
-severityThe error level, should be 'WARNING' or 'ERROR'.
$checker->num_errors()-
Set (if argument specified) and retrieve the number of errors found.
$checker->num_warnings()-
Set (if argument specified) and retrieve the number of warnings found.
$checker->name()-
Set (if argument specified) and retrieve the canonical name of POD as found in the
=head1 NAMEsection. $checker->node()-
Add (if argument specified) and retrieve the nodes (as defined by
=headXand=item) of the current POD. The nodes are returned in the order of their occurrence. They consist of plain text, each piece of whitespace is collapsed to a single blank. $checker->idx()-
Add (if argument specified) and retrieve the index entries (as defined by
X<>) of the current POD. They consist of plain text, each piece of whitespace is collapsed to a single blank. $checker->hyperlink()-
Add (if argument specified) and retrieve the hyperlinks (as defined by
L<>) of the current POD. They consist of a 2-item array: line number andPod::Hyperlinkobject.
AUTHOR
Please report bugs using http://rt.cpan.org.
Brad Appleton <bradapp@enteract.com> (initial version), Marek Rouchal <marekr@cpan.org>
Based on code for Pod::Text::pod2text() written by Tom Christiansen <tchrist@mox.perl.com>