/ 
Graphics-Framebuffer-6.28
River stage zero No dependents
/ README.md

Graphics-Framebuffer

Note, this module does NOT work (natively) in Microsoft Windows

PREREQUISITES

This module REQUIRES access to the video framebuffer, usually "/dev/fb0". You must be using a video device and driver that exposes this device to software. Video cards with their proprietary drivers are not likely to work. However, most open-sourced drivers, seem to work fine. VirtualBox drivers work too. You must also have the appropriate permissions to write to this device (usually membership with group "video").

Sometimes you can force a VESA framebuffer console driver to be loaded by adding a video mode to the grub command line. You can do this with some proprietary video drivers that don't have their own framebuffer drivers.

ATTENTION CPAN TESTERS! Please make sure the above is noted before testing (and marking a fail)

I highly recommend you install the system (or package) version of the "Imager" library, as it is already pre-compiled with all the needed C libraries for it to work with this module. In Yum (RedHat) and Aptitude (Debian/Ubuntu) this module is called "libimager-perl" (or "perl-libImager"). However, if you desire to install it yourself, please do it manually, and not via CPAN. When you do it manually, you can see the missing C libraries it is looking for in the "Makefile.PL" process and stop it there. You can then install these libraries until it no longer says something is missing. You see, it just turns off functionality if it can't find a library (when installing from CPAN), instead of stopping. Libraries usually missing are those for GIF, JPEG, PNG, TrueType and FreeType fonts. These are necessary not optional, if you wish to be able to work with fonts and images.

The "build-essential" tools need to be installed. This is generally a C compiler, linker, and standard C libraries (usually gcc variety). The module "Inline::C", which this module uses, requires it. Also, the package "kernel-headers".

You should also install typical TTF fonts as well. I suggest the Windows fonts (fonts-wine), Ubuntu fonts (fonts-ubuntu) and anything else you wish to use.

INSTALLATION

You SHOULD install this module from the console, not X-Windows.

To make your system ready for this module, then please install the following:

DEBIAN BASED SYSTEMS (Ubuntu, Mint, Raspian, etc):

sudo apt update sudo apt install build-essential linux-headers libimager-perl libinline-c-perl libmath-gradient-perl libmath-bezier-perl libfile-map-perl libtest-more-perl libsys-cpu-perl fonts-wine

REDHAT BASED SYSTEMS (Fedora, CentOS, etc):

sudo yum update sudo yum upgrade kernel-headers build-essential perl-math-gradient perl-math-bezier perl-file-map perl-imager perl-inline-c perl-sys-cpu perl-test-more

Continuing...

With that out of the way, you can now install this module.

To install this module, run the following commands:

perl Makefile.PL make make test make install

NOTE: The install step may require sudo (root access).

   _Build.PL is not supported by Inline::C._

FURTHER TEST SCRIPTS

To test the installation properly. Log into the text console (not X). Go to the 'examples' directory and run 'primitives.pl'. It basically calls most of the features of the module.

The script 'threadstest.pl' requires 'Sys::CPU'. It is not listed as a prerequisite for this module (as it isn't), but if you want to run this one script, then this is a required module. It demonstrates how to use this module in a threaded environment.

GETTING STARTED

There is a script template in the 'examples' directory in this package. You can use it as a starting point for your script. It is conveniently called 'template.pl'. I recommend copying it, renaming it, and leaving the original template intact for use on another project.

COMPATIBILITY vs. SPEED

This module, suprisingly, runs on a variety of hardware with accessible framebuffer devices. The only limitation is CPU power. Why CPU power? The module uses the CPU for its graphics calculations and drawing, not the GPU. There are very little framebuffer drivers that use the GPU for anything, and thus no reliable libraries for calling the GPU at the framebuffer level.

Some lower clocked ARM devices may be too slow for practical use of all of the methods in this module, but the best way to find out is to run 'examples/primitives.pl' to see which are fast enough to use.

Here's what I have tested this module on (all 1920x1080x32):

SUPPORT AND DOCUMENTATION

After installing, you can find documentation for this module with the 'perldoc' command.

perldoc Graphics::Framebuffer (You may have to install 'perldoc', but this usually works.)

or

man Graphics::Framebuffer (Installing 'perldoc' usually enables Perl module man pages)

You can also look for information at:

##RT## - CPAN's request tracker (report bugs here) - http://rt.cpan.org/NoAuth/Bugs.html?Dist=Graphics-Framebuffer

##AnnoCPAN## - Annotated CPAN documentation - http://annocpan.org/dist/Graphics-Framebuffer

##CPAN Ratings## - http://cpanratings.perl.org/d/Graphics-Framebuffer

##Search CPAN## - http://search.cpan.org/dist/Graphics-Framebuffer/

##YouTube## - https://youtu.be/4Yzs55Wpr7E

Copyright (C) 2013-2019 Richard Kelsch

This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License.

See http://dev.perl.org/licenses/ for more information.