Changes for version 1.04_32 - 2009-12-14

  • Only two 5.10 B::C bugs remaining!
  • C.pm: added missing FBM logic to GV >= 5.10 (test 11). Forbid MAGIC on non-magival SVs >= 5.10 (tests 14 + 23). Special PVMG PL_sv_undef string. (namesv problem on 10,14,23)

Changes for version 1.04_31 - 2009-12-14

  • C.pm: fix test 21 on 5.10 "Bad free() ignored". Dynamically allocate CopLABEL
  • Makefile.PL: fix the make depend section > 5.9
  • t/testc.sh: fix -D option

Changes for version 1.04_30 - 2009-12-13

  • Better 5.6 support, but Bytecode compiler still disabled. Not even the Byteloader works for 5.6 assembled code. The Disassembler does not stop at ret. Fixed several C tests.
  • bytecode.pl: renumbering policy: <= 5.6 squeeze, >= 5.8 fixed to force exact bytecode numbering as with 5.8. Allow float versions, such as 10.001 for subreleases.
  • Add perlversion to header. Add byteorder check logic.
  • Added logic to include all possible unsupported ops, all holes. bytecode table checked for 5.6.1, 5.6.2, 5.8.0, 5.8.1-5.11 Note, that I found official and contradicting 5.6.1 releases. ActiveState 5.6.1.626 had no op_children, the unix release tarball with 5.6.1 (called Trial 1) still has it.
  • ByteLoader.pm (1.06_06): better bytecode numbering.
  • Asmdata.pm (1.02_02): strict numbering along 5.8. Unsupported ops are now also included, with PUT method 0.
  • Assembler.pm (0.07_07): Add perlversion to header
  • Disassembler.pm (1.05_04): Add perlversion to header. Print header only for existing.
  • BcVersions/Asm*.pm, BcVersions.pod: added for most versions with the CORE compiler.
  • disassemble: Make it work with the older Disassembler. Make it work with older bytecode >= 5.8 via Asmdata unsupported ops.
  • i386.xs, jitcompiler.pl: removed (seperate module)
  • bytecode.h, C.xs: Fixed for 5.6, tested with 5.6.1 with MSVC.
  • bytecode.h, byterun.c: add static int force = 0. Override it to 1 to try out executing older bytecodes.
  • C.pm: fix test 16 on 5.10 again, non-threaded only (GVAV magic). first fix in 1.04_24, broken in 1.04_28. On 5.11 I have a broken RV handling here. Remove version and Regexp::DESTROY from the automatic methods (experimental). First attempts with pv and hek consting failed.
  • t/testc.sh, t/testplc.sh: support proper cmdline arguments, add -h for help Fixed test 5 by fixing the wrong test.
  • perloptree.pod: renamed from perloptreeguts.pod. Added links.

Changes for version 1.04_29 - 2009-12-07

  • Disable the Bytecode compiler for 5.6. Fixed besides the __DATA__ handle (test 15) all remaining 5.8 C bugs.
  • C.pm: assign the PVX of GV also for empty stashes (main::) to avoid destruction failures at Perl_pad_undef() SvPVX_const(namesv) == '&'. Fixes tests 14 and 23
  • byterun.c: No assert on empty bs_sv, it is &PL_sv_undef. Map missing -Dv on 5.6 to -Df i.e. -D256 Added better debugging output: setter values.
  • STATUS: re-run CORE tests, list cmdlines, update status
  • Disassembler.pm: added gen_header_hash() for gen_header output. add to documentation.
  • Bytecode.pm: -S uses gen_header_hash for gen_header output.

Changes for version 1.04_28 - 2009-12-06

  • C.pm: fix -fcog (Copy on Grow with -O1 and -O2) for >= 5.10 by a new SVPV. Statically initialize PVs with a union layout trick. Use char* as first union member. Revert xpvcv+svsect changes to pre-initialize those structs against gvcv recursion.
  • t/b.t, t/o.t, t/stash.t: fix tests for 5.6.2
  • bytecode.c: byteorder swab only if same length. 1234 => 4321, 12345678 => 87654321. Skip a 0x prefix for byteorder in the header. Perl 5.6 had this.
  • Assembler.pm (0.07_06): 5.6 byteorder fix: until 5.6 the $Config{byteorder} was falsely dependent on ivsize, we need longsize. Add 0x to byteorder in header again, as with 5.6.
  • t/testc.sh: do not run old leftovers. some 5.6 optimizations
  • t/c_o1.t, t/c_o2.t, t/cc_o2.t, t/cc_o2.t: added
  • t/test.pl: support -O1 and -O2
  • broke ByteLoader

Changes for version 1.04_27 - 2009-12-04

  • CC.pm (1.02_03): fixed endless loop in optimized sort. The sortcv cmp needed a return NULL (test 19).
  • c.t, cc.t: add failing tests as TODOs

Changes for version 1.04_26 - 2009-12-02

  • C.pm: remove nv->IVX for 5.10 (Can't locate object method "IVX" via package "B::NV"). protect mg->OBJ when SCALAR (Can't call method "save" on unblessed reference). fix NV isa IV, to fix test 23 (Nick Koston). fix CopLABEL for 5.11 (test 21) fix PMOP extflags, esp. for split on >= 5.10 (test 5 + 7) add fbm_compile() to BM::save >= 5.8 (test 11) (Nick Koston)
  • t/c.t, t/testc.sh: added tests 23, 24 (Nick Koston)
  • Bytecode.pm (1.02_04), bytecode.h: store and set PMOP reflags as U32. Fixes tests 2-4,7 Start of backporting Perl 5.6

Changes for version 1.04_25 - 2009-11-30

  • C.pm: fixed IO for 5.11: LINES => IVX. specialize GvLINES = -1 and protect against U32 signed-ness. fixed test 8 main::AUTOLOAD (unoptimized only)
  • t/test.pl: enable -Mblib for all Perl versions. fix 5.6.2 ldopts by explicit checking of (-lperl|CORE\/libperl5). make test works now for 5.6.2
  • t/cc.t: adapt TODOs
  • t/c.t: add TODOs 15 for 5.6
  • script/perlcc: a.exe for cygwin also

Changes for version 1.04_24 - 2009-11-29

  • C.pm: fixed more CV basics (test 9), just stash for autoload missing (test 8). PVLV adjusted, but no testcase yet. IO adjusted. Fixes test 4. re-enabled Perl 5.6, all tests but 8,15 pass with t/testc.sh. make test not. added option -DO, more OP info than with -Do. added saving "main::" CVs. Fixes test 16. Fixed PMOP op_pmreplroot for >= 5.10 (for SUBST). No test
  • t/TESTS, t/testc.sh: added 20 for qr// bug in 5.10
  • t/c.t: remove TODO status from tests 14-16

Changes for version 1.04_23 - 2009-11-22

  • yapc_bratislava08.pod: title fix
  • SIGNATURE: added
  • C.pm: GvGP handling improved. added more sect comments. added -u option "unused" not to print verbose debugging info for unused subs. Fixed CV XPVCVIX initialisation - off-by-one error, wrong CvFLAGS. Fixes test 6.
  • run perltidy -i=2

Changes for version 1.04_22 - 2009-11-16

  • C.pm, CC.pm: fixed illegal pad in ASSERT_CURPAD_ACTIVE("pad_sv") with DEBUGGING. Simply forgot to set PL_comppad

Changes for version 1.04_21 - 2009-11-07

  • yapc_bratislava08.pod: added
  • C.pm: fixed CALLREGCOMP >=5.10 by using dynamic newSVpvn as in ByteLoader

Changes for version 1.04_20 - 2008-06-25

  • t/TESTS: numbered.
  • t/TESTS: added sub FETCHSIZE to test 16. required now
  • C.pm, CC.pm: change debug globals to hash.
  • C.pm: Fix B::RV::save for 5.10
  • CC.pm: 5.10 fixed GvSV to GvSVn (PERL_DONT_CREATE_GVSV), fix cc test 3+4 crash
  • Artistic, Copying: added. Clarified perl license.
  • Bytecode.pm: fixed IO=>PVNV problem in test 15.
  • bytecode.pl, bytecode.h: rewrote gp_sv and gp_file setters with x (special setters). Fixes unshare hek assert in test 15, and force creation of GVSV.
  • Assembler.pm 0.07_05: cygwin text-mount fixes with \r\n
  • t/testplc.sh, t/testc.sh: require bash, accept testnumber args
  • Asmdata.pm: fix PORTABILITY docs
  • t/testc.sh: -Bdynamic: link to shared libperl
  • cc_harness: simplify. fixed for -Bdynamic -E

Changes for version 1.04_19 - 2008-06-08

  • CC.pm: CXt_LOOP check rewrite, use now CxTYPE_no_LOOP()
  • CC.pm, t/*.t: useithreads, not usethreads
  • bytecode.t, test.pl: TODO handling: do not print "ok 1 #"
  • b.t: fixed skip logic, better skip message
  • Bblock: fixed to work without B::Concise (5.6.2)
  • C.xs: add PM_GETRE for 5.6.2 and earlier
  • CC.pm: Fix PP_EVAL hack from 1.04_18
  • Bytecode: fixed IO::SUBPROCESS error (test 15)
  • cc_harness: check static libperl.a, else try dynamic. Support -E
  • ByteLoader: support different byteorders (Disassembler not yet)
  • ByteLoader, Assembler, bytecode.pl: add archflags to header, relax platform strictness.
  • t/stash.t fixed for 5.10
  • Disassembler: added hashref return for get_header in scalar context.
  • Bytecode: fixed compiler crash/assertions for GV without GP (test 11)

Changes for version 1.04_18 - 2008-06-04

  • Fixed t/assembler.t on 5.6.2
  • Added ByteLoader::unimport (from 5.6.2)
  • ByteLoader: Fixed bytecode crashes for 5.10+5.11 in 2-5, 7 by removing PMf_COMPILETIME from op_pmflags. Reason: empty check_substr in INTUIT. (6 still failing)
  • ByteLoader: Fixes for 5.11 by using PM_SETRE (test 7 still failing)
  • Bytecode: removed op_reflags. pregcomp with op_pmflags alone is enough to reconstruct it.
  • C,CC: enabled static_ext + DynaLoader boot section again. Fixed in cygperl.
  • CC: fixed Bug#55302 PP_EVAL by adding PP_EVAL_thr for threaded perl. cc_runtime.h was always wrong on this!

Changes for version 1.04_17 - 2008-04-20

  • Added Fedora Core 1 as test system (5.6.2, 5.8.3, 5.11.0@33708 + valgrind)
  • ByteLoader: Fixed broken BYTEORDER check (for 32int)
  • ByteLoader: Remove allowing older versions until we have an opcode table for older versions.
  • ByteLoader: Fixed SIGSEGV with older gcc (3.3.2) at bstate->bs_obj_list[0] = NULL
  • ByteLoader, C.xs: Newx() support and more for older perl's. Tested with 5.8.3
  • bytecode.pl: Fixed <11 op_reflags (double definition)
  • bytecode.pl: Support 8-10 version syntax (op_pmstash, cop_io)
  • Makefile.PL: added MKPATH blib/bin
  • added ByteLoader/ppport.h
  • fixed t/stash.t for 5.11

Changes for version 1.04_16 - 2008-04-14

  • ByteLoader: Fix PL_tokenbuf for older perls without PL_parser
  • B::C: walkoptree_slow for verbose statistics op_count.
    • Consistent in -v verbose and not verbose.
    • Workaround for invalid pad in save_context.
    • Added -Dp for verbose package cache printing.
    • -v verbose adds more generated comments: op struct fields
  • Fixed cop_label for 5.11 (Change #33656)
  • Fixed make subdirs-test error in 5.8.8
  • Fixed RT#52920 "invalid cop_free of nullified cop" for B::C

Changes for version 1.04_15 - 2008-04-11

  • Highlights: bytecode and ByteLoader portability preparation and commented disassembler output. PVGV and new REGEX still broken. Fixes for no ithreads.
  • Fixed verbose Bytecode for old B::Concise (5.8.8). t/testplc.sh failed before.
  • ByteLoader: Work on portability (different arch, version and sizes). Added bl_header. Changed macro BYTECODE_HEADER_CHECK to function bytecode_header_check(). Fixes for no threads.
  • bytecode.h: pregcomp fix for 5.10 w/o threads (Thanks to david@cantrell.org.uk for his cpantest for netbsd). use xpv_cur and not xpv_len for the rx length (len - 1) to strip off the ending nul byte. 5.10: new minlen check aborts
  • ByteLoader security: added strconst maxsize flag to bytecode.pl for buffer overflow checks.
  • Bytecode -DA for devel assertions of absolute or probably wrong opindex pointers (nyi)
  • disassemble, B::Assembler: commented output, similar to -MO=Bytecode,-S Added backwards option --bare for older assemblers.
  • assemble, disassemble: added pod
  • B::Disassembler: Provide default printers print_insn (commented) and print_insn_bare. Portability: Use the header settings from the .plc and not the current perl settings.
  • B::Assembler 0.07_03, B::Disassembler 1.05_02, ByteLoader 0.06_03: Added longsize to the bytecode header, just for xcv_depth.
  • B::Debug 1.05_03: Fixes for no threads.
  • Makefile.PL: Fixed script/perlcc.PL dependency make: *** No rule to make target `script/perlcc', needed by `blib/bin/perlcc'. (Thanks to david@cantrell.org.uk for his cpantest for solaris)
  • Added test TODO's, Added perloptreeguts.pod

Changes for version 1.04_14 - 2008-03-24

  • Fixed some 1.04_13 +x executable permissions in docs. Windows habits.

Changes for version 1.04_13 - 2008-03-24

  • Fixed B::C pv init in 5.10. Forgot refcnt and flags.
  • Added "Other perl to exe compilers" section to perlcompile.pod. This is even a FAQ.
  • Added the NOTES to perlcompile.pod
  • Added temp. perloptreeguts.pod. In work, also at the wiki.
  • Fixed Bytecode op_pmflags assertions.
  • Added orangesect for enough regexp space in RE's sv_any. Engine not initialized though.
  • Hangs in C/CC executables at an op_free(PL_main_root) trying to free the static op structsm because the earlier op_seq -1 hack is gone now, and opt_static was replaced by opt_latefree. Set now opt_latefree = 1. This fixed tests 1 and 13. Slowly making progress step by step.

Changes for version 1.04_12 - 2008-03-16

  • Fixed bug #40435 CC: Can't locate object method "_save_common_middle" via package "B::FAKEOP"
  • move tests from [bc]*.t into shared TESTS file.
  • fixed remaining ugly Bytecode bug in B::AV::bsave $_ = $_->ix for @array. Now we are at the same state as with 5.9.4
  • fixed wrong bc cop_warning cast for 5.8
  • fixed CC pmreplroot and pmreplstart fields
  • make C and CC less verbose, honor -v, -q ignored.

Changes for version 1.04_11 - 2008-03-09

  • removed Jit and Asm stuff. Maybe as seperate packages somewhen. But targeting PIR makes more sense.
  • added STATUS
  • added old Changes from the new git clone repo by Sam Vilain
  • fix C cop
  • fix C savepvn apparently
  • work on HV init - crashes at invalid entry
  • use run_cc_test

Changes for version 1.04_10 - 2008-02-26

  • change bc pvx access dummy struct bytestate_xpv, so pv has the same fields as with 5.8, seperated from the sv. The sv is seperated from the pv. TODO: different strategy for B::C, must link xpv to sv
  • add and parse Assembler comments
  • add Bytecode comments to -S output unless -q
  • change op_reflags from U16 to U32
  • guarantee ByteLoader backwards compatibility: Accept lower versions also.

Changes for version 1.04_09 - 2008-02-25

  • restored 5.8 backwards compatibility, mainly for test comparison. CPAN installation will abort.
  • make t/test*.sh PERL independent
  • fixed B::C GV init crashes (SvPOK assertion)
  • added B::C RE section
  • fixed B::C xpvcv and xpvnv section
  • comment Bytecode -S nice ops to re-assemble them without errors
  • added new asm opcode op_reflags
  • removed Bytecode cop_arybase for 5.10
  • 5.8 compatibility: fixed bytecode.pl versioning, Asmdata creation (exact same for 5.8.8), asmdata.t, b.t tests
  • improved make clean
  • add ByteLoader -Dt and -Dv debugging
  • don't link against jit code against possible sideeffects
  • fixed c.t and cc.t tests

Changes for version 1.04_08 - 2008-02-22

  • fixed t/b.t tests for 5.11 (REGEXP, ref RV => IV)
  • fixed Makefile.PL deps to ignore the interim .pl files
  • added PMOP reflags
  • added madprop to B-1.18_01 and B::C (if provided by B)
  • enhanced B::Debug 1.05_02
  • fixed B::C PL_cshlen (already initialized since 5.10)
  • fixed B::C GvFILE
  • fixed various (SV)xpv list casts and inits,
  • fixed B::C xpvnv_list for 5.10
  • fixed B::C xpvio_list for 5.10
  • fixed B::C pmopsect for 5.11
  • bootstrap also all $Config{static_ext}, not only dynamic stashes

Changes for version 1.04_07 - 2008-02-20

  • moved bstate->bs_pv.xpv_pv slot to bs_pv.xiv_u.xivu_p1
  • fixed pv_free
  • added op_pmflags 2 to match PMOP
  • moved B into lib/B
  • fixed ByteLoader Makefile deps
  • added -DM flag to Bytecode backend
  • added perlcompile.pod and Perl_5_Internals.htm

Changes for version 1.04_06 - 2008-02-19

  • no crashes anymore for 5.10, just op_pmflags & PMf_ONCE assertions.
  • blead@32980 crashes in tests 11,16,17,18
  • enhanced B::Debug (no version bump)
  • fixed general op_list inits, and specials for av, hv
  • almost fixed pv within sv handling
  • added -O=C,-DS for SV debugging

Changes for version 1.04_05 - 2008-02-18

  • added t/test.pl and t/test*.sh to MANIFEST.
  • fixed ByteLoader reading from the <DATA> filter.
  • fixed -H .plc header parsing
  • updated Bytecode options in NOTES and pod
  • added -O=Bytecode,-v option
  • fixed PL_preprocess and SvREPADTMP_off for 5.11

Changes for version 1.04_04 - 2008-02-08

  • added jitcompiler macros

Changes for version 1.04_03 - 2008-02-05

  • added Jit and Asm layout, fixed Makefile deps

Changes for version 1.04_02 - 2008-01-22

  • removed from CORE, now on CPAN.
  • added byteorder to bytecode header.
  • added support for 5.10 (NOT WORKING!), 5.9.5 not tested. up to 5.8.x already in CORE, so disabled. add back support later, when C/CC is improved or more features are added.
  • added type hekindex
  • added c.t and cc.t tests
  • extended bytecode.pl format: added version logic to have strictly consecutive indices

Changes for version 1.04_01 - 2008-01-15

  • first package layout for all now non-CORE packages.
  • B::C was 1.03 when exterminated. Oops, Module::Corelist says 1.05 for 5.9.4, Right so.
  • Nicholas Clark <nwc10+p5p4@colon.colondot.net> 2007-05-07 15:35:56 bytecode.pl: Exterminate! ext/B/B/Asmdata.pm: Exterminate!
  • Nicholas Clark <nwc10+p5p4@colon.colondot.net> 2007-05-07 14:53:05 Given that @optype and @specialsv_name are hard coded tables, it seems more logical for them to be in B.pm, rather than in the "boilerplate" for the machine generated B/Asmdata.pm
  • Marcus Holland-Moritz <mhx-perl@gmx.net> 2004-08-29 13:22:48 Fix typo in B::Assembler.
  • Marcus Holland-Moritz <mhx-perl@gmx.net> 2004-08-29 13:21:50 Skip ext/B/t/assembler.t when configured without B.
  • Rafael Garcia-Suarez <rgarciasuarez@gmail.com> 2003-08-09 21:13:27 Remove ByteLoader from the list of modules whose compilability should be tested : it's loaded (at runtime) by ext/B/t/bytecode.t (as Enache pointed out.)
  • chromatic <chromatic@rmci.net> 2002-05-10 07:43:25 added ext/B/t/o.t
  • Gurusamy Sarathy <gsar@cpan.org> 2001-03-19 08:07:09 Subject: Re: sync sync sync: have I missed any patches? Replace djSP with dSP.
  • Mark-Jason Dominus <mjd@plover.com> 2001-01-16 14:43:18 Subject: [PATCH @8436] Eliminate op_children
    • (Replaced by #8448) Traces of op_children (cleanup of #8442)
    • (Replaced by #8448) More op_children traces (cleanup of #8442).
    • Subject: [PATCH #3 @8436] Re: Eliminate op_children Replace #8444 and #8445.
  • Gurusamy Sarathy <gsar@cpan.org> 2001-01-30 14:20:24 integrate changes#7984,7987,8010 from mainline (gets rid of dTHR which has been a noop for a while now, except for the compatibility definition in thread.h) @8010 remove dTHR;
  • Gurusamy Sarathy <gsar@cpan.org> 2000-12-18 03:37:02 @7518 UNIVERSAL::can
  • Gurusamy Sarathy <gsar@cpan.org> 2000-12-18 00:03:38 Fix a couple of compiler-noted nits in #7235.
    • Fix of sorts for bug id 20000901.092. There seems to be no trace of a 'pmshort' anywhere in the B, so the offending line was simply removed.
  • Gurusamy Sarathy <gsar@cpan.org> 2000-12-17 22:49:13 Subject: [ID 20000928.002] perlcc & ByteCode.pm option mismatch Did not apply cleanly, manual intervention was needed.
    • Subject: [ID 20001003.006] B::Debug not -w clean
    • Test harness update to sync with the new perlcc, from Simon Cozens.
  • Gurusamy Sarathy <gsar@cpan.org> 2000-11-27 18:11:21 Bytecompiler patches from Benjamin Stuhl. More bytecompiler. Subject: [PATCH blead] B:: missing dependency Byteloader 0.04
  • Gurusamy Sarathy <gsar@cpan.org> 2000-11-27 13:53:18 U8->U16 CvFLAGS(cv)
  • Jarkko Hietaniemi <jhi@iki.fi> 2001-10-25 18:07:58
    • make re, Opcode, File::Glob and B threadsafe
    • include XS_VERSION in MY_CXT_KEY (tweak for change#12652)
  • Jarkko Hietaniemi <jhi@iki.fi> 2001-04-05 04:00:33 Integrate changes #9544,9547,9549(perlio),9550,9551 from maintperl into mainline. "double" should be "NV"; standard typemap is missing entry for NV
  • Author: bailey <bailey@bailey_vms> 2000-02-09 09:09:45 Resync with mainline
  • bailey <bailey@bailey_vms> 2000-01-20 00:25:30 Quick integration of mainline changes to date
  • Nathan Torkington <gnat@frii.com> 1999-08-01 11:23:35 ext/B/B/Disassembler.pm patch Message-ID: <14244.33431.739419.806927@localhost.frii.com>
  • Nick Ing-Simmons <nick@ing-simmons.net> 1999-01-02 14:06:30 Export constant subs from B.xs for op.h, cop.h and a few others. Use them in various B::* rather than have local defs.
  • Nick Ing-Simmons <nick@ing-simmons.net> 1999-01-02 10:04:02 Integrate ext/B changes from //depot/cfgperl 'copy in' ext/B/B.xs (@2460..) 'merge in' ext/B/B/C.pm ext/B/B/CC.pm ext/B/B/Stackobj.pm (@2524..)
  • Nick Ing-Simmons <nick@ing-simmons.net> 1999-01-02 10:04:02 @2491 Integrate ext/B changes from //depot/cfgperl
  • Gurusamy Sarathy <gsar@cpan.org> 1998-09-23 09:52:46 B::Asmdata define PUT_svindex(), PUT_opindex()
  • Nick Ing-Simmons <nick@ing-simmons.net> 1998-12-20 14:21:29 Save _all_ GV's which have SV, AV or HV set.
  • Gurusamy Sarathy <gsar@cpan.org> 1998-08-02 07:09:35 fixes for pod noises
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-22 02:08:00 fix up B modules for PL_* changes
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-07-21 18:13:16 Compiler docs for 5.005 Message-Id: <199807211713.SAA20735@sable.ox.ac.uk>
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-22 01:29:09 s/PL_sv/PL_bytecode_sv/ etc., so we have unique, case-insensitive names
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-21 07:12:00 fix bytecode.pl with moved var names
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-21 05:31:13 part 2 of PERL_OBJECT fixes (globals in bytecode.h moved to intrpvar.h)
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-21 05:29:10 part 1 of PERL_OBJECT fixes for new var names
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-20 09:38:39 complete s/foo/PL_foo/ changes (all escaped cases identified with brute force search script). Result builds and passes all tests on Solaris. win32 and PERL_OBJECT are still untested.
  • Nick Ing-Simmons <nick@ing-simmons.net> 1998-07-18 13:53:03 PL_ prefix to all perlvars, part1 Builds and passes all tests at one limit i.e. -DPERL_GLOBAL_STRUCT
  • Ilya Zakharevich <ilya@math.ohio-state.edu> 1998-07-15 06:10:36 Minor improvements to perlcc Message-Id: <199807151010.GAA11270@monk.mps.ohio-state.edu>
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-15 10:01:41 add stub docs for ext/B, other minor tweaks
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-09 05:37:48 get it building again on win32
  • Gurusamy Sarathy <gsar@cpan.org> 1998-07-04 05:02:01 fix perlcc to not rm output file, and other -w(arts)
  • Stephen McCamant <alias@mcs.com> 1998-06-22 21:19:43 Inheritance of B:: classes Message-Id: <m0yoIgR-000EP2C@alias-2.pr.mcs.net>
  • Gurusamy Sarathy <gsar@cpan.org> 1998-06-19 17:22:23 update repository copy of Asmdata.pm after `perl bytecode.pl`
  • Gurusamy Sarathy <gsar@cpan.org> 1998-06-11 02:59:23 fix outdated bytecode.pl
  • Nick Ing-Simmons <nick@ing-simmons.net> 1998-05-14 18:09:01 Changes to allow compiler with gcc-2.8.1 in C++ mode, Remove K&R style functions, avoid struct/typedef clash.
  • Ed Peschko <epeschko@den-mdev1> 1998-04-29 21:02:36 [ PATCH 5.004_64 ] Integrated regression tests for compiler added perlcc.PL
  • Ilya Zakharevich <ilya@math.ohio-state.edu> 1998-04-08 03:21:03 Subject: [PATCH 5.004_64] Cryptic error from B::CC Date: Sat, 11 Apr 1998 19:52:25 -0400 (EDT)
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-04-14 16:22:51 [compiler] CC did "<<" instead of ">>" for right-shift on ints.
  • Charles Bailey <bailey@newman.upenn.edu> 1998-03-02 01:48:27 Miscellaneous minor fixes
  • Spider Boardman <spider@orb.nashua.nh.us> 1998-03-01 02:02:47 Almost OK: 5.004_61 (threads, perlio)
  • Andrew Cohen <cohen@andy.bu.edu> 1998-02-27 20:03:29 Change getc/fread to PerlIO_getc/fread in bytecode.h: Subject: [PATCH 5.004_61] bunch of small patches
  • Nick Ing-Simmons <nick@ing-simmons.net> 1998-02-28 11:31:15 Missed FREAD in bytecode.h Cannot export svref_mutex in non-threaded perl
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-27 18:35:27 Change FREAD/FGETC to BGET_FREAD/BGET_FGETC to avoid clash with preprocessor symbol on Digital UNIX.
  • Gurusamy Sarathy <gsar@cpan.org> 1998-02-26 03:56:19 [win32] various cleanups so that B can be built as "just another extension"
    • export symbols needed for building B
    • bset_obj_store() is needed by byterun(), so define it there instead of at B.xs, and export it
    • freadpv() is only used in B.xs, so move it there
    • byte*.h are now included by perl.h
    • regenerate embed*.h
  • Gurusamy Sarathy <gsar@cpan.org> 1998-02-22 02:40:56 [win32] get compiler building under win32 (needed Makefile.PL hacks that could be applicable to other platforms)
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-25 17:44:34 More compiler tweaks.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-20 18:23:47 Remove compiler files from their old lib/B locations. The compiler now builds by default (without the byteperl executable so far) and seems to work at least minimally.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-20 18:05:33 Move lib/B/... and lib/[BO].pm over to where they should be, under ext/B.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-20 17:54:58 Start getting compiler to work when built with the core.
    • Still won't work as of this change.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-20 16:42:13
    • Merge perlext/Compiler/... into mainline. Some files move to
    • ext/B/..., some to lib/B/..., O.pm and B.pm go in lib and some move to the base perl directory (e.g. headers). Will need some cleaning up before it builds properly, I would guess.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-20 16:39:38
    • [compiler] Win32 changes from Sarathy, tweaked slightly by me.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1998-02-17 17:50:50
    • Assorted changes to the compiler
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1997-12-17 10:59:40
    • Fix typo in compiler B/C.pm.
  • Alpha5 Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1997-12-10 18:33:53
    • Start overhauling compiler. It was working at least minimally
    • right up until the final tweak of B.xs to add threadsv_names at which point building it provokes a seg fault in perl while doing the xsubpp :-(.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1997-09-03 12:31:48
    • Make compiler build/work with devel 5.005
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1997-07-05 11:58:05
    • Change %lx to %x in B::CV::save to prevent some CV
    • fields becoming 0 in the init section. Add missing write_back in B::Stackobj::Padsv::load_double to fix test 22 of op/my.t.
  • Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1997-07-05 11:58:05
    • B::CC::pp_padsv must cope with vivify_ref (5.004) as well as provide_ref (5.003)
  • a4 Malcolm Beattie <mbeattie@sable.ox.ac.uk> 1997-05-03 14:47:06
    • initial check in of compiler from version Alpha a3 to a4

Documentation

ByteLoader bytecode versions
Autogenerated data about Perl ops, used to generate bytecode
Introduction to the Perl Compiler-Translator
The Perl op tree
Assemble Perl bytecode
generate executables from Perl programs
Need help with the perl compiler, emit C or JIT, blabla

Modules

Autogenerated data about Perl ops, used to generate bytecode
load byte compiled perl code
Assemble Perl bytecode
Walk basic blocks
Perl compiler's bytecode backend
Perl compiler's C backend
Perl compiler's optimized C translation backend
Disassemble Perl bytecode
Helper module for CC backend
show what stashes are loaded

Provides

in lib/B/C.pm
in lib/B/C.pm
in lib/B/Disassembler.pm
in lib/B/C.pm
in lib/B/CC.pm
in lib/B/CC.pm