NAME

Test::Aggregate - Aggregate *.t tests to make them run faster.

VERSION

Version 0.370

SYNOPSIS

use Test::Aggregate;

my $tests = Test::Aggregate->new( {
    dirs => $aggregate_test_dir,
} );
$tests->run;

ok $some_data, 'Test::Aggregate also re-exports Test::More functions';

DESCRIPTION

WARNING: this is ALPHA code. The interface is not guaranteed to be stable. Further, check out Test::Aggregate::Nested (included with this distribution). It's a more robust implementation which does not have the same limitations as Test::Aggregate.

A common problem with many test suites is that they can take a long time to run. The longer they run, the less likely you are to run the tests. This module borrows a trick from Apache::Registry to load up your tests at once, create a separate package for each test and wraps each package in a method named run_the_tests. This allows us to load perl only once and related modules only once. If you have modules which are expensive to load, this can dramatically speed up a test suite.

DEPRECATION

For a whole variety of reasons, tests run in BEGIN/CHECK/INIT/INIT blocks are now deprecated. They cause all sorts of test sequence headaches. Plus, they break the up-coming nested TAP work. You will have a problem if you use this common idiom:

BEGIN {
    use_ok 'My::Module' or die;
}

Instead, just use the module and put the use_ok tests in a t/load.t file or something similar and don't aggregate it. See the following for more information: http://use.perl.org/~Ovid/journal/38974.

USAGE

Create a separate directory for your tests. This should not be a subdirectory of your regular test directory. Write a small driver program and put it in your regular test directory (t/ is the standard):

use Test::Aggregate;
my $other_test_dir = 'aggregate_tests';
my $tests = Test::Aggregate->new( {
   dirs => $other_test_dir
});
$tests->run;

ok $some_data, 'Test::Aggregate also re-exports Test::More functions';

Take your simplest tests and move them, one by one, into the new test directory and keep running the Test::Aggregate program. You'll find some tests will not run in a shared environment like this. You can either fix the tests or simply leave them in your regular test directory. See how this distribution's tests are organized for an example.

Note that Test::Aggregate also exports all exported functions from Test::More, allowing you to run other tests after the aggregated tests have run.

use Test::Aggregate;
my $other_test_dir = 'aggregate_tests';
my $tests = Test::Aggregate->new( {
   dirs => $other_test_dir
});
$tests->run;
ok !(-f 't/data/tmp.txt'), '... and our temp file should be deleted';

Some tests cannot run in an aggregate environment. These may include test for this with the $ENV{TEST_AGGREGATE} variable:

package Some::Package;

BEGIN {
    die __PACKAGE__ ." cannot run in aggregated tests"
      if $ENV{TEST_AGGREGATE};
}

METHODS

`new`

my $tests = Test::Aggregate->new(
    {
        dirs            => 'aggtests',
        verbose         => 1,            # optional, but recommended
        dump            => 'dump.t',     # optional
        shuffle         => 1,            # optional
        matching        => qr/customer/, # optional
        set_filenames   => 0,            # optional and not recommended
        tidy            => 1,            # optional and experimental
        test_nowarnings => 0,            # optional and experimental
    }
);

Creates a new Test::Aggregate instance. Accepts a hashref with the following keys:

dirs (either this or tests is mandatory)

The directories to look in for the aggregated tests. This may be a scalar value of a single directory or an array refernce of multiple directories.
tests (either this or dirs is mandatory)

Instead of providing directories for the aggregated tests, you may supply an array reference with a list of tests to aggregate. If both are supplied, these tests will be appended to the list of tests found in dirs.

The matching parameter does not apply to test files identified with this key.
verbose (optional, but strongly recommended)

If set with a true value, each test programs success or failure will be indicated with a diagnostic output. The output below means that aggtests/slow_load.t was an aggregated test which failed. This means it's much easier to determine which aggregated tests are causing problems.
```
t/aggregate.........2/? 
#     ok - aggtests/boilerplate.t
#     ok - aggtests/00-load.t
# not ok - aggtests/subs.t
#     ok - aggtests/slow_load.t
t/aggregate.........ok
t/pod-coverage......ok
t/pod...............ok
```
Note that three possible values are allowed for verbose:
- 0 (default)
  
  No individual test program success or failure will be displayed.
- 1
  
  Only failing test programs will have their failure status shown.
- 2
  
  All test programs will have their success/failure shown.
dump (optional)

You may list the name of a file to dump the aggregated tests to. This is useful if you have test failures and need to debug why the tests failed.
shuffle (optional)

Ordinarily, the tests are sorted by name and run in that order. This allows you to run them in any order.
matching (optional)

If supplied with a regular expression (requires the qr operator), will only run tests whose filename matches the regular expression.
set_filenames (optional)

If supplied with a true value, this will cause the following to be added for each test:
```
local $0 = $test_filename;
```
This is the default behavior.
findbin (optional)

If supplied with a true value, this will cause FindBin::again() to be called before each test file.

This is turned off by default.

Note that older versions of FindBin (pre 1.47) sometimes get confused about where the bin directory is when I set $0. I don't know why, but this is a rarely used option and only happens pre 5.8 perl, so I'm not too worried about it. Just keep it in mind.
dry (optional)

Just print the tests which will be run and the order they will be run in (obviously the order will be random if shuffle is true).
tidy

If supplied a true value, attempts to run Perl::Tidy on the source code. This is a no-op if Perl::Tidy cannot be loaded. This option is experimental. Plus, if your tests are terribly convoluted, this could be slow and possibly buggy.

If the value of this argument is the name of a file, assumes that this file is a .perltidyrc file.
test_nowarnings

Disables Test::NoWarnings (fails if the module cannot be loaded).

This is experimental and somewhat problematic. Let me know if there are any problems.

`run`

$tests->run;

Attempts to aggregate and run all tests listed in the directories specified in the constructor.

SETUP/TEARDOWN

Since BEGIN and END blocks are for the entire aggregated tests and not for each test program (see CAVEATS), you might find that you need to have setup/teardown functions for tests. These are useful if you need to setup connections to test databases, clear out temp files, or any of a variety of tasks that your test suite might require. Here's a somewhat useless example, pulled from our tests:

#!/usr/bin/perl

use strict;
use warnings;

use lib 'lib', 't/lib';
use Test::Aggregate;
use Test::More;

my $dump = 'dump.t';

my ( $startup, $shutdown ) = ( 0, 0 );
my ( $setup,   $teardown ) = ( 0, 0 );
my $tests = Test::Aggregate->new(
    {
        dirs     => 'aggtests',
        dump     => $dump,
        startup  => sub { $startup++ },
        shutdown => sub { $shutdown++ },
        setup    => sub { $setup++ },
        teardown => sub { $teardown++ },
    }
);
$tests->run;
is $startup,  1, 'Startup should be called once';
is $shutdown, 1, '... as should shutdown';
is $setup,    4, 'Setup should be called once for each test program';
is $teardown, 4, '... as should teardown';

Note that you can still dump these to a dump file. This will only work if Data::Dump::Streamer 1.11 or later is installed.

There are four attributes which can be passed to the constructor, each of which expects a code reference:

startup
```
startup => \&connect_to_database,
```
This function will be called before any of the tests are run. It is not run in a BEGIN block.
shutdown
```
shutdown => \&clean_up_temp_files,
```
This function will be called after all of the tests are run. It will not be called in an END block.
setup
```
setup => sub { 
   my $filename = shift;
   # this gets run before each test program.
},
```
The setup function will be run before every test program. The name of the test file will be passed as the first argument.
teardown
```
teardown => sub {
   my $filename = shift;
   # this gets run after every test program.
}
```
The teardown function gets run after every test program. The name of the test file will be passed as the first argument.

GLOBAL VARIABLES

You shouldn't be using global variables and a dependence on them can break your code. However, Perl provides quite a few handy global variables which, unfortunately, can easily break your tests if you change them in one test and another assumes an unchanged value. As a result, we localize many of Perl's most common global variables for you, using the following syntax:

local %ENV = %ENV;

The following global variables are localized for you. Any others must be localized manually per test.

@INC
%ENV
%SIG
$/
$_
$|

CAVEATS

Not all tests can be included with this technique. If you have Test::Class tests, there is no need to run them with this. Otherwise:

exit

Don't call exit() in your aggregated tests. We now warn very verbosely if this is done, but we still exit on the assumption that further tests cannot run.
__END__ and __DATA__ tokens.

These won't work and the tests will call BAIL_OUT() if these tokens are seen. However, this limitation does not apply to Test::Aggregate::Nested.
BEGIN and END blocks.

Since all of the tests are aggregated together, BEGIN and END blocks will be for the scope of the entire set of aggregated tests. If you need setup/teardown facilities, see "TEARDOWN" in SETUP.
Syntax errors

Any syntax errors encountered will cause this program to BAIL_OUT(). This is why it's recommended that you move your tests into your new directory one at a time: it makes it easier to figure out which one has caused the problem.
no_plan

Unfortunately, due to how this works, the plan is always no_plan. http://groups.google.com/group/perl.qa/browse_thread/thread/d58c49db734844f4/cd18996391acc601?#cd18996391acc601 for more information.
Test::NoWarnings

Great module. It loves to break aggregated tests since some might have warnings when others will not. You can disable it like this:
```
my $tests = Test::Aggregate->new(
    dirs    => 'aggtests/',
    startup => sub { $INC{'Test/NoWarnings.pm'} = 1 },
);
```
As an alternative, you can also disable it with:
```
my $tests = Test::Aggregate->new({
   dirs            => 'aggtests',
   test_nowarnings => 0,
});
```
We do work internally to subtract the extra test added by Test::NoWarnings. It's painful and experimental. Good luck.
Variable "$x" will not stay shared at (eval ...

Because each test is wrapped in a method call, any of your subs which access a variable in an outer scope will likely throw the above warning. Pass in arguments explicitly to suppress this.

Instead of:
```
my $x = 17;
sub foo {
    my $y = shift;
    return $y + $x;
}
```
Write this:
```
my $x = 17;
sub foo {
    my ( $y, $x ) = @_;
    return $y + $x;
}
```
However, consider Test::Aggregate::Nested. This warning does not apply with that module.
Singletons

Be very careful of code which loads singletons. Oftimes those singletons in test suites may be altered for testing purposes, but later attempts to use those singletons can fail dramatically as they're not expecting the alterations. (Your author has painfully learned this lesson with database connections).

DEBUGGING AGGREGATE TESTS

Before aggregating tests, make sure that you add tests one at a time to the aggregated test directory. Attempting to add many tests to the directory at once and then experiencing a failure means it will be much harder to track down which tests caused the failure.

Debugging aggregated tests which fail is a multi-step process. Let's say the following fails:

my $tests = Test::Aggregate->new(
    {
        dump    => 'dump.t',
        shuffle => 1,
        dirs    => 'aggtests',
    }
);
$tests->run;

Manually run the tests

The first step is to manually run all of the tests in the aggtests dir.

prove -r aggtests/

If the failures appear the same, fix them just like you would fix any other test failure and then rerun the Test::Aggregate code.

Sometimes this means that a different number of tests run from what the aggregted tests run. Look for code which ends the program prematurely, such as an exception or an exit statement.

Run a dump file

If this does not fix your problem, create a dump file by passing dump => $dumpfile to the constructor (as in the above example). Then try running this dumpfile directly to attempt to replicate the error:

prove -r $dumpfile

Tweaking the dump file

Assuming the error has been replicated, open up the dump file. The beginning of the dump file will have some code which overrides some Test::Builder internals. After that, you'll see the code which runs the tests. It will look similar to this:

if ( __FILE__ eq 'dump.t' ) {
    Test::More::diag("******** running tests for aggtests/boilerplate.t ********")
       if $ENV{TEST_VERBOSE};
    aggtestsboilerplatet->run_the_tests;

    Test::More::diag("******** running tests for aggtests/subs.t ********")
       if $ENV{TEST_VERBOSE};
    aggtestssubst->run_the_tests;

    Test::More::diag("******** running tests for aggtests/00-load.t ********")
       if $ENV{TEST_VERBOSE};
    aggtests00loadt->run_the_tests;

    Test::More::diag("******** running tests for aggtests/slow_load.t ********")
       if $ENV{TEST_VERBOSE};
    aggtestsslow_loadt->run_the_tests;
}

You can try to narrow down the problem by commenting out all of the run_the_tests lines and gradually reintroducing them until you can figure out which one is actually causing the failure.

COMMON PITFALLS

My Tests Threw an Exception But Passed Anyway!

This really isn't a Test::Aggregate problem so much as a general Perl problem. For each test file, Test::Aggregate wraps the tests in an eval and checks my $error = $@. Unfortunately, we sometimes get code like this:

$server->ip_address('apple');

And internally, the 'Server' class throws an exception but uses its own evals in a DESTROY block (or something similar) to trap it. If the code you call uses an eval but fails to localize it, it wipes out your eval. Neat, eh? Thus, you never get a chance to see the error. For various reasons, this tends to impact Test::Aggregate when a DESTROY block is triggered and calls code which internally uses eval (e.g., DBIx::Class). You can often fix this with:

DESTROY {
   local $@ = $@;  # localize but preserve the value
   my $self = shift;
   # do whatever you want
}

`BEGIN` and `END` blocks

Remember that since the tests are now being run at once, these blocks will no longer run on a per-test basis, but will run for the entire aggregated set of tests. You may need to examine these individually to determine the problem.

`CHECK` and `INIT` blocks.

Sorry, but you can't use these (just as in modperl). See perlmod for more information about them and why they won't work.

`Test::NoWarnings`

This is a great test module. When aggregating tests together, however, it can cause pain as you'll often discover warnings that you never new existed. For a quick fix, add this before you attempt to run your tests:

$INC{'Test/NoWarnings.pm'} = 1;

That will disable Test::NoWarnings, but you'll want to go in later to fix them.

Paths

Many tests make assumptions about the paths to files and moving them into a new test directory can break this.

`$0`

Tests which use $0 can be problematic as the code is run in an eval through Test::Aggregate and $0 may not match expectations. This also means that it can behave differently if run directly from a dump file.

As it turns out, you can assign to $0! We do this by default and set the $0 to the correct filename. If you don't want this behavior, pass set_filenames => 0 to the constructor.

Minimal test case

If you cannot solve the problem, feel free to try and create a minimal test case and send it to me (assuming it's something I can run).

AUTHOR

Curtis Poe, <ovid at cpan.org>

BUGS

Please report any bugs or feature requests to bug-test-aggregate at rt.cpan.org, or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Test-Aggregate. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.

SUPPORT

You can find documentation for this module with the perldoc command.

perldoc Test::Aggregate

You can also find information oneline:

http://metacpan.org/release/Test-Aggregate

ACKNOWLEDGEMENTS

Many thanks to mauzo (http://use.perl.org/~mauzo/ for helping me find the 'skip_all' bug.

Thanks to Johan Lindström for pointing me to Apache::Registry.

COPYRIGHT & LICENSE

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

To install Test::Aggregate, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Test::Aggregate

CPAN shell

perl -MCPAN -e shell
install Test::Aggregate

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)