Security Advisories (7)
CVE-2026-4176 (2026-03-29)

Perl versions from 5.9.4 before 5.40.4-RC1, from 5.41.0 before 5.42.2-RC1, from 5.43.0 before 5.43.9 contain a vulnerable version of Compress::Raw::Zlib. Compress::Raw::Zlib is included in the Perl package as a dual-life core module, and is vulnerable to CVE-2026-3381 due to a vendored version of zlib which has several vulnerabilities, including CVE-2026-27171. The bundled Compress::Raw::Zlib was updated to version 2.221 in Perl blead commit c75ae9cc164205e1b6d6dbd57bd2c65c8593fe94.

CVE-2026-15534 (2026-08-09)

Perl versions through 5.45.1 have out-of-bounds heap reads and writes during regular expression matching via an undersized superlinear cache in S_regmatch. The regex engine's superlinear cache holds one bit per subject position for each participating WHILEM node, so the bit count is the subject length plus one times the number of nodes. Nothing checks that product for positive overflow of the signed 32-bit count: a 286331153 byte subject matched against a pattern with 15 participating nodes stores the count as 14, leaving a two byte cache. The cache is then indexed from the real match position and node number, so reads go past the end of the allocation, and on failure CACHEsayNO sets a bit past it. A caller that matches an attacker controlled subject of this size against a pattern of this shape can crash the process or corrupt heap memory.

CVE-2026-19487 (2026-08-13)

Perl versions from 5.9.4 before 5.41.9 produce incorrect regular expression match results when a stale failure flag ends the Aho-Corasick prescan early in S_find_byclass. The prescan walks the subject for positions where the full pattern could match, and the engine tries it from the leftmost one recorded. A failing transition sets the failed flag, and a later successful transition does not clear it, so the prescan reads the stale flag as a failure and stops before it can record a candidate that starts earlier. It takes a subject where one candidate is recorded and a later character then forces a fallback through a fail link that succeeds. Example: "ABCDE" =~ m/ABCF|BCDE|C/; # matches C at offset 2, not BCDE "ABCDE" =~ m/ABCF|BCDE|C(G)/; # no match, BCDE missed An alternation like this can miss input it should match, or match it on the wrong branch, so an access or filtering decision made from the result can be wrong.

CVE-2025-40909 (2025-05-30)

Perl threads have a working directory race condition where file operations may target unintended paths. If a directory handle is open at thread creation, the process-wide current working directory is temporarily changed in order to clone that handle for the new thread, which is visible from any third (or more) thread already running. This may lead to unintended operations such as loading code or accessing files from unexpected locations, which a local attacker may be able to exploit. The bug was introduced in commit 11a11ecf4bea72b17d250cfb43c897be1341861e and released in Perl version 5.13.6

CVE-2026-13221 (2026-07-13)

Perl versions through 5.43.9 produce silently incorrect regular expression matches when an alternation of more than 65535 fixed string branches is compiled into a trie in Perl_study_chunk. When such branches are combined into a trie, the delta between the first branch and the shared tail is stored in a 16-bit field. A branch count above 65535 overflows the field, and the trie's match decision table is truncated with no warning or error. A pattern of this shape produces false positive matches (matching strings it should not) and false negative matches (failing to match strings it should). When such a pattern gates an access or filtering decision, the result is wrong.

CVE-2026-57432 (2026-07-13)

Perl versions through 5.43.10 have an integer overflow in S_measure_struct leading to an out-of-bounds heap read in pack and unpack. S_measure_struct adds each item's size times its repeat count to a running total with no overflow check, so a large repeat count in a pack or unpack template wraps the signed SSize_t total negative. The @, X, and x position codes then guard their moves with a signed length comparison that passes when the length is negative, advancing the buffer pointer out of bounds. A template derived from untrusted input can read heap memory past the buffer and return it to the caller.

CVE-2026-8376 (2026-05-25)

Perl versions through 5.43.10 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds. Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer. A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time.

NAME

Test2::Manual::Concurrency - Documentation for Concurrency support.

FORKING

Test2

Test2 supports forking. For forking to work you need to load Test2::IPC.

Test::Builder

Test::Builder Did not used to support forking, but now that it is based on Test2 it does. Test2::IPC must be loaded just as with Test2.

Test2::Suite

Test2::Suite tools should all work fine with true forking unless otherwise noted. Pseudo-fork via threads (Windows and a few others) is not supported, but may work.

Patches will be accepted to repair any pseudo-fork issues, but for these to be used or tested they must be requested. Fork tests should not run on pseudo-fork systems unless they are requested with an environment var, or the AUTHOR_TESTING var. Pseudo-fork is fragile, and we do not want to block install due to a pseudo-fork flaw.

Test::SharedFork

Test::SharedFork is currently support and maintained, though it is no longer necessary thanks to Test2::IPC. If usage ever drops off then the module may be deprecated, but for now the policy is to not let it break. Currently it simply loads Test2::IPC if it can, and falls back to the old methods on legacy installs.

Others

Individual authors are free to support or not support forking as they see fit.

THREADING

Note This only applies to ithreads.

Test2

The core of Test2 supports threading so long as Test2::IPC is loaded. Basic threading support (making sure events make it to the parent thread) is fully supported, and must not be broken.

Some times perl installs have broken threads (Some 5.10 versions compiled on newer gcc's will segv by simply starting a thread). This is beyond Test2's control, and not solvable in Test2. That said we strive for basic threading support on perl 5.8.1+.

If Test2 fails for threads on any perl 5.8 or above, and it is reasonably possible for Test2 to work around the issue, it should. (Patches and bug reports welcome).

Test::Builder

Test::Builder has had thread support for a long time. With Test2 the mechanism for thread support was switched to Test2::IPC. Test::Builder should still support threads as much as it did before the switch to Test2. Support includes auto-enabling thread support if threads is loaded before Test::Builder.

If there is a deviation between the new and old threading behavior then it is a bug (unless the old behavior itself can be classified as a bug.) Please report (or patch!) any such threading issues.

Test2::Suite

Tools in Test2::Suite have minimal threading support. Most of these tools do not care/notice threading and simply work because Test2::IPC handles it. Feel free to report any thread related bugs in Test2::Suite. Be aware though that these tools are not legacy, and have no pre-existing thread support, we reserve the right to refuse adding thread support to them.

Test2::Workflow

Test2::Workflow has been merged into Test2::Suite, so it gets addressed by this policy.

Test2::Workflow has thread support, but you must ask for it. Thread tests for Test2::Workflow do not event run without setting either the AUTHOR_TESTING env var, or the T2_DO_THREAD_TESTS env var.

To use threads with Test2::Workflow you must set the T2_WORKFLOW_USE_THREADS env var.

If you do rely on threads with Test2::Workflow and find a bug please report it, but it will be given an ultra-low priority. Merging patches that fix threading issues will be given normal priority.

SEE ALSO

Test2 - Test2 itself.

Test2::Suite - Initial tools built using Test2.

Test2::Manual - Primary index of the manual.

SOURCE

The source code repository for Test2-Manual can be found at https://github.com/Test-More/Test2-Suite/.

MAINTAINERS

Chad Granum <exodist@cpan.org>

AUTHORS

Chad Granum <exodist@cpan.org>

COPYRIGHT

Copyright 2018 Chad Granum <exodist@cpan.org>.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

See http://dev.perl.org/licenses/