/ 
IO-Socket-INET6-2.72
River stage two • 13 direct dependents • 20 total dependents
/ IO::Socket::INET6

NAME

IO::Socket::INET6 - Object interface for AF_INET/AF_INET6 domain sockets

SYNOPSIS

use IO::Socket::INET6;

DESCRIPTION

IO::Socket::INET6 provides an object interface to creating and using sockets in either AF_INET or AF_INET6 domains. It is built upon the IO::Socket interface and inherits all the methods defined by IO::Socket.

CONSTRUCTOR

new ( [ARGS] )

Creates an IO::Socket::INET6 object, which is a reference to a newly created symbol (see the Symbol package). new optionally takes arguments, these arguments are in key-value pairs.

In addition to the key-value pairs accepted by IO::Socket, IO::Socket::INET6 provides.

Domain	Address family               AF_INET | AF_INET6 | AF_UNSPEC (default)
PeerAddr	Remote host address          <hostname>[:<port>]
PeerHost	Synonym for PeerAddr
PeerPort	Remote port or service       <service>[(<no>)] | <no>
PeerFlow    Remote flow information
PeerScope   Remote address scope
LocalAddr	Local host bind	address      hostname[:port]
LocalHost	Synonym for LocalAddr
LocalPort	Local host bind	port         <service>[(<no>)] | <no>
LocalFlow   Local host flow information
LocalScope  Local host address scope
Proto	Protocol name (or number)    "tcp" | "udp" | ...
Type	Socket type                  SOCK_STREAM | SOCK_DGRAM | ...
Listen	Queue size for listen
ReuseAddr	Set SO_REUSEADDR before binding
Reuse	Set SO_REUSEADDR before binding (deprecated, prefer ReuseAddr)
ReusePort	Set SO_REUSEPORT before binding
Broadcast	Set SO_BROADCAST before binding
Timeout	Timeout	value for various operations
MultiHomed  Try all addresses for multi-homed hosts
Blocking    Determine if connection will be blocking mode

If Listen is defined then a listen socket is created, else if the socket type, which is derived from the protocol, is SOCK_STREAM then connect() is called.

Although it is not illegal, the use of MultiHomed on a socket which is in non-blocking mode is of little use. This is because the first connect will never fail with a timeout as the connect call will not block.

The PeerAddr can be a hostname, the IPv6-address on the "2001:800:40:2a05::10" form , or the IPv4-address on the "213.34.234.245" form. The PeerPort can be a number or a symbolic service name. The service name might be followed by a number in parenthesis which is used if the service is not known by the system. The PeerPort specification can also be embedded in the PeerAddr by preceding it with a ":", and closing the IPv6 address on brackets "[]" if necessary: "124.678.12.34:23","[2a05:345f::10]:23","any.server.com:23".

If Domain is not given, AF_UNSPEC is assumed, that is, both AF_INET and AF_INET6 will be both considered when resolving DNS names. AF_INET6 has priority. If you guess you are in trouble not reaching the peer,(the service is not available via AF_INET6 but AF_INET) you can either try Multihomed (try any address/family until reach) or concrete your address family (AF_INET, AF_INET6).

If Proto is not given and you specify a symbolic PeerPort port, then the constructor will try to derive Proto from the service name. As a last resort Proto "tcp" is assumed. The Type parameter will be deduced from Proto if not specified.

If the constructor is only passed a single argument, it is assumed to be a PeerAddr specification.

If Blocking is set to 0, the connection will be in nonblocking mode. If not specified it defaults to 1 (blocking mode).

Examples:

$sock = IO::Socket::INET6->new(PeerAddr => 'www.perl.org',
                              PeerPort => 'http(80)',
                              Proto    => 'tcp');

Suppose either you have no IPv6 connectivity or www.perl.org has no http service on IPv6. Then,

(Trying all address/families until reach)

   $sock = IO::Socket::INET6->new(PeerAddr => 'www.perl.org',
                                 PeerPort => 'http(80)',
				 Multihomed => 1 ,
                                 Proto    => 'tcp');

(Concrete to IPv4 protocol)

   $sock = IO::Socket::INET6->new(PeerAddr => 'www.perl.org',
                                 PeerPort => 'http(80)',
				 Domain => AF_INET ,
                                 Proto    => 'tcp');


   $sock = IO::Socket::INET6->new(PeerAddr => 'localhost:smtp(25)');

   $sock = IO::Socket::INET6->new(Listen    => 5,
                                 LocalAddr => 'localhost',
                                 LocalPort => 9000,
                                 Proto     => 'tcp');

   $sock = IO::Socket::INET6->new('[::1]:25');

   $sock = IO::Socket::INET6->new(PeerPort  => 9999,
                                 PeerAddr  => Socket6::inet_ntop(AF_INET6,in6addr_broadcast),
                                 Proto     => udp,
                                 LocalAddr => 'localhost',
                                 Broadcast => 1 )
                             or die "Can't bind : $@\n";

 NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE

As of VERSION 1.18 all IO::Socket objects have autoflush turned on by default. This was not the case with earlier releases.

NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE

METHODS

accept ()

See IO::Socket::INET.

bind ()

See IO::Socket::INET.

configure ()

This function exists in this module, but I (= Shlomi Fish) don't know what it does, or understand it. It's also not tested anywhere. I'll be happy to be enlightened.

connect ()

See IO::Socket::INET.

sockaddr ()

Return the address part of the sockaddr structure for the socket

sockdomain()

Returns the domain of the socket - AF_INET or AF_INET6 or whatever.

sockport ()

Return the port number that the socket is using on the local host

sockhost ()

Return the address part of the sockaddr structure for the socket in a text form ("2001:800:40:2a05::10" or "245.245.13.27")

sockflow ()

Return the flow information part of the sockaddr structure for the socket

sockscope ()

Return the scope identification part of the sockaddr structure for the socket

peeraddr ()

Return the address part of the sockaddr structure for the socket on the peer host

peerport ()

Return the port number for the socket on the peer host.

peerhost ()

Return the address part of the sockaddr structure for the socket on the peer host in a text form ("2001:800:40:2a05::10" or "245.245.13.27")

peerflow ()

Return the flow information part of the sockaddr structure for the socket on the peer host

peerscope ()

Return the scope identification part of the sockaddr structure for the socket on the peer host

REPOSITORY

The Subversion repository for this module carrying complete version history and other information is:

http://svn.berlios.de/svnroot/repos/web-cpan/IO-Socket-INET6/

SEE ALSO

Socket,Socket6, IO::Socket

AUTHOR

This program is based on IO::Socket::INET by Graham Barr <gbarr@pobox.com> and currently maintained by the Perl Porters.

Modified by Rafael Martinez Torres <rafael.martinez@novagnet.com> and Euro6IX project.

Modified further by Shlomi Fish <shlomif@iglu.org.il>, while disclaiming all copyrights.

COPYRIGHT

Copyright (c) 2003- Rafael Martinez Torres <rafael.martinez@novagnet.com>.

Copyright (c) 2003- Euro6IX project.

Copyright (c) 1996-8 Graham Barr <gbarr@pobox.com>.

All rights reserved.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.