1.30
 - Jump straight to version 1.30, as this module now contains a fair amount of new
   functionality that requires version 1.3.0 (or later) of the mpc library.
 - Fix for Makefile.PL. (It was not defining NV_IS_FLOAT128 when it should.)
 - Handle "rounding away from zero" mode. (Becomes available in mpc-1.3.0.)
 - Add new functions Rmpc_agm, Rmpc_eta_fund and in_fund_dom.
 - Wrap Radius functions.
 - Wrap Ball functions.

1.16
 - Work around perl bug in https://github.com/Perl/perl5/issues/19550.
   (Affected only perl-5.35.10.)

1.15
 - Fix bug re inconsistent settings of POK and NOK flag, which manifests itself as (eg):
   http://www.cpantesters.org/cpan/report/dc17e330-900b-11ec-bfc9-d1f1448276d4
   It's a bug that rarely bites, and applies mainly (but not only) to perl-5.18.x and
   earlier.

1.14
 - Fix https://github.com/sisyphus/math-decimal64/pull/1 (also aplies to Math::MPC)
   Thanks to @hiratara

1.13
 - Fix handling of perls whose ivsize == 4 && nvtype eq '__float128' in t/mpc_64.t
 - Refactor IV/UV/NV/PV handling inside overload subs.

1.12
 - Fix failure in t/out_str2.t

1.11
 - Update PREREQ_PM version of Math::MPFR to 4.14
   (This is needed to accommodate changes in mpfr-4.1.0.)

1.09
 - Cater for the possibility that _Float128 is an unknown type. (This is done in
   math_mpc_include.h.)
 - Prototype subroutines listed in 'use subs()'.
 - Add Rmpc_fma (previously missed), Rmpc_sum and Rmpc_dot (both newly available) functions.
 - Skip buggy BSD (long double) systems (see
   http://www.cpantesters.org/cpan/report/c3334524-8930-11e9-9997-9db8de51d2a1)
   in test 4 of t/Rmpc_set_NV.t.
 - In t.out_str2.t, for tests 1-6, we need to cater for a change in mpfr_out_str
   output with mpfr-4.2.0
 - Small update to README - minimum required version of mpfr is now 3.0.0.

1.08
 - Add new functions Rmpc_cmp_abs and Rmpc_rootofunity
 - Create MPC.pod

1.07
 - Fix typo in overload_add diagnostic message that was segfaulting on amd64-freebsd.
   Thanks to Slaven Rezic.

1.06
 - Replace SvUV/SvIV/SvNV with svUVX/SvIVX/SvNVX where appropriate. (In typemap, too.)
 - Replace (throughout) the "SvNOK(b)" condition with "SvNOK(b) && !SvPOK(b)".
 - Add support for nvtype=double -DDEBUGGING perls
 - Bring __float128 support into line with Math::MPFR

1.05
 - Corrections to README and Makefile.PL regarding _Complex types handling
 - Rewrite new()
 - Add __float128 handling iff nvtype is __float128 && mpfr library supports __float128
 - Add Rmpc_set_NV and Rmpc_set_NV_NV functions.
 - Rename Rmpc_get_dc and Rmpc_get_ldc to Rmpc_get_DC and Rmpc_get_LDC (resp).
 - Add Rmpc_get_F128C.
 - Specify EU-MM-6.58 as prerequisite in Makefile.PL. (Current CPAN::Reporter has problems
   with earlier versions of EU::MM on cygwin, perl-5.14.x. Thanks Peter Acklam.)
 - Replace SvUV/SvIV/SvNV with SvUVX/SvIVX/SvNVX where appropriate

1.04
 - Fix for replacement of Math::Complex_C::Long by Math::Complex_C::L

1.03
 - No longer define USE_64_BIT_INT if ivtype is 'long'.
 - Rename USE_64_BIT_INT #define to MATH_MPC_NEED_LONG_LONG_INT
 - Make version 3.23 of Math::MPFR a pre-requisite.

1.02
 - _has_inttypes() no longer checks for whether USE_LONG_DOUBLE is defined.
   (Was harmless ... but didn't make much sense.)
 - Define PERL_NO_GET_CONTEXT.
 - Tweak to Math::MPC::gmp_v().
 - Add metadata to Makefile.PL.

1.01
 - Alter the way that strEQ gets hold of HvNAME(SvSTASH(SvRV(sv))) - so that -Wall
   doesn't emit "null argument" warnings. (Thanks Daniel Kahn Gillmor.)
 - Alter test 5 of t/complex_c.t to accommodate version 0.07 (and later) of
   Math::Complex_C.

1.00
 - Add Rmpc_log10, Rmpc_mul2si and Rmpc-div_2si (new in 1.0.0)
 - Accommodate namechange of mpc_mul_2exp and mpc_div_2exp to mpc_mul_2ui
   and mpc_div_2ui (respectively) in mpc-1.0.0.
 - Rewrite the detecting of availability of double _Complex and long double _Complex
   types by looking for _Complex_I instead of _MPC_H_HAVE_COMPLEX (in line with
   the way mpc.h currently does it).

0.93
 - Remove 'not' from overloads. Apparently achieved nothing anyway, and 5.16
   warns that it's invalid.

0.92
 - The default rounding mode and default precision globals are now thread-safe.
   Consequently at least 5.008008 is required.

0.91
 - overload_equiv and overload_not_equiv weren't correctly handling the
   case where the NV is a NaN. (Add tests in mpc_overload.t.)

0.90
 - Add Rmpc_sin_cos, Rmpc_set_dc, Rmpc_set_ldc, Rmpc_get_dc, Rmpc_get_ldc
   (new in mpc-0.9).
 - Add documentation of gmp_v and mpfr_v (previously missed).
 - In the documentation, elaborate on the way that Rmpc_get-version() and
   MPC_VERSION & friends determine their values. (Thanks Vincent Lefevre.)
 - In MPC.xs change mpfr_v() to return mpfr_get_version() instead of
   MPC_VERSION_STRING.
 - In t/aab_basic.t print out the mpfr and mpc library versions from
   the libraries, instead of from the headers (as had been the case)
 - Some of the croak() messages in MPC.xs finished with "\n" - which
   has now been removed from those messages.
 - Releases of the MPC library (after 0.8.2) will require gmp-4.3.2
   and mpfr-2.4.2. README and Makefile.PL have now been changed.

0.83
 - Add some warn() statements to t/bool.t, to try and see why test 2
   fails - as reported by one of the cpan-testers. (That done, I
   received an email from Jean-Louis Morel, with a patch that fixes
   the issue ... I'll retain t/bool.t in its modified state.)
 - Patch overload_not, overload_not_equiv and overload_equiv (in
   MPC.xs) so that NaNs do not get passed on to the MPC comparison
   functions (as this is something forbidden by the documentation).
   Thanks to Jean-Louis Morel.

0.82
 - Implement '#include <inttypes.h>'. (Should have been done for 0.81.)
   See https://rt.cpan.org/Ticket/Display.html?id=58564

0.81
 - Change the overload_string() and _get_str() functions to match the
   formatting provided by mpc_out_str().
 - Fix the signed zero problem with overloaded mul and div operations,
   and add t/signed_zero.t as a check. Thanks Paul Zimmerman and
   Philippe Theveny.
 - Add Rmpc_mul_sj, Rmpc_mul_ld, Rmpc_mul_d, Rmpc_div_sj, Rmpc_sj_div,
   Rmpc_div_ld, Rmpc_ld_div, Rmpc_div_d and Rmpc_d_div. These simply
   wrap the the XSubs created to fix the signed zero anomaly (above).

0.80
 - Requires version 0.8 of the mpc library.
 - Add Rmpc_asin, Rmpc_acos, Rmpc_atan, Rmpc_asinh, Rmpc_acosh and
   Rmpc_atanh (new in mpc-0.8).
 - Add Rmpc_pow_d, Rmpc_pow_ld, Rmpc_pow_si, Rmpc_pow_ui, Rmpc_pow_z
   and Rmpc_pow_fr (new in mpc-0.8).
 - Add overloaded atan2 function.

0.70
 - Requires version 0.7 of the mpc library. (Change to MPC_SET_X_Y.)
 - Remove Rmpc_random and Rmpc_random2 (as the functions that they
   wrap have been removed in mpc-0.7. (And remove t/mpc_random.t.)
 - Add Rmpc_pow, Rmpc_set_nan and Rmpc_swap (new in mpc-0.7).
 - Overload the ** and **= operators.
 - Improve the efficiency of some of the overload routines by
   eliminating the need to use a temporary mpfr object (using the
   already existing *mpc_t_obj instead).
 - Remove the rounding arg from RMPC_RE() and RMPC_IM() as it does
   nothing, anyway.

0.60
 - Requires version 0.6 of the mpc library.
 - Now a complete range of Rmpc_set_*_* functions (where '*' can be any
   one of 'ui', 'si', 'd', 'uj', 'sj', 'ld', 'f', 'q', 'z' and 'fr').
 - Add Rmpc_set_z, Rmpc_set_q, Rmpc_set_f and Rmpc_set_fr.
 - Add Rmpc_set_z_z, Rmpc_set_q_q and Rmpc_set_f_f.
 - In keeping with changes to the mpc library, all of the Rmpc_init*
   functions have been removed except for Rmpc_init2 and Rmpc_init3
   (and their "_nobless" forms).
 - mpc-0.60 has removed mpc_get_default_prec and mpc_set_default_prec.
   Rmpc_get_default_prec and Rmpc_set_default_prec remain (but the
   former has changed to return 0 if default real and imaginary
   precisions are different. With earlier versions, real and imaginary
   default precisions were always the same, but this is no longer the
   case). Rmpc_get_default_prec2 and Rmpc_set_default_prec2 have now
   been added. The former returns an array of 2 values(real,
   imaginary) and the latter requires 2 arguments (real, imaginary).
 - The overload_copy sub now preserves the precision of the copied object
   (instead of assigning default precision as was previously the case).
 - Rmpc_get_str now wraps mpc_get_str (available in 0.6). The (pure perl)
   sub that was formerly "Rmpc_get_str" has been renamed "_get_str".
   The "overload_string" sub is unchanged.
 - Add Rmpc_set_uj, Rmpc_set_sj and Rmpc_set_ld (available in mpc-0.6).
 - Add Rmpc_strtoc and Rmpc_set_str (available in 0.6), and add set_str.t
   test script.

0.52
 - Requires version 0.5.2 of the mpc library.
 - Add MPC_VERSION, MPC_VERSION_NUM and Rmpc_get_version.

0.51
 - Requires version 0.5.1 of the mpc library.
 - Add MPC_VERSION_STRING, MPC_VERSION_MAJOR, MPC_VERSION_MINOR
   and MPC_VERSION_PATCHLEVEL.
 - Replace pre-existing Rmpc_set_fr_fr with a function that wraps
   the mpc_set_fr_fr function (which became available in 0.5.1)
 - Add Rmpc_real, Rmpc_imag, Rmpc_arg, Rmpc_proj (new in 0.5.1)

0.50
 - Requires version 0.50 of the mpc library.
 - Add Rmpc_log, Rmpc_cos, Rmpc_tan, Rmpc_sinh, Rmpc_cosh, and
   Rmpc_tanh - all of which became available with mpc-0.5.
 - Add log and cos overloading.
 - Remove (the need for) INLINE.h
 - Add mpfr_v and gmp_v functions (not exported).
 - mpc_out_str changed with mpc-0.5. The tests in out_str1.t and
   out_str2.t were changed accordingly.
 - Bring Rmpc_get_str in line with the changed formatting of
   mpc_out_str that occurred with mpc-0.5.

0.46
 - Add overloading of 'bool'.
 - Change Rmpc_out_str and Rmpc_inp_str to allow use of streams other
   than STDOUT and STDIN.
 - For compatibility with my other MPFR/GMP based perl modules, add
   TRmpc_out_str and TRmpc_inp_str (which, for Math::MPC only, are
   aliased to Rmpc_out_str and Rmpc_inp_str respectively).
 - Change 'Rmpc_get_prec' return to match 'mpc_get_prec' (which is a new
   inclusion in mpc-0.4.6).
 - Add 'Rmpc_get_prec2' and 'Rmpc_sin' (new in mpc-0.4.6).
 - Remove the tests in the Makefile.PL that test for the presence of
   a suitable compiler, GMP library, MPFR library and MPC library.

0.45
 - First release