NAME

Number::WithError - Numbers with error propagation and scientific rounding

SYNOPSIS

use Number::WithError;

my $num = Number::WithError->new(5.647, 0.31);
print $num . "\n";
# prints '5.65e+00 +/- 3.1e-01'
# (I.e. it automatically does scientific rounding)

my $another = $num * 3;
print $another . "\n";
# propagates the error assuming gaussian errors
# prints '1.69e+01 +/- 9.3e-01'

# trigonometric functions also work:
print sin($another) . "\n";
# prints '-9.4e-01 +/- 3.1e-01'

my $third = $another ** $num;
print $third. "\n";
# propagates both errors into one.
# prints '8.7e+06 +/- 8.1e+06'

# shortcut for the constructor:
use Number::WithError 'witherror';
$num = witherror('0.00032678', ['2.5e-5', '3e-5'], 5e-6);
# can deal with any number of errors, even with asymmetric errors
print $num . "\n";
# prints '3.268e-04 + 2.5e-05 - 3.00e-05 +/- 5.0e-06'
# Note: It may be annyoing that they don't all have the same
# exponent, but they *do* all have the sam significant digit!

DESCRIPTION

This class is a container class for numbers with a number of associated symmetric and asymmetric errors. It overloads practically all common arithmetic operations and trigonometric functions to propagate the errors. It can do proper scientific rounding (as explained in more detail below in the documentation of the significant_digit() method).

You can use Math::BigFloat objects as the internal representation of numbers in order to support arbitrary precision calculations.

Errors are propagated using Gaussian error propagation.

With a notable exception, the test suite covers way over ninety percent of the code. The remaining holes are mostly difficult-to-test corner cases and sanity tests. The comparison routines are the exception for which there will be more extensive tests in a future release.

OVERLOADED INTERFACE

This module uses overload to enable the use of the ordinary Perl arithmetic operators on objects. All overloaded operations are also availlable via methods. Here is a list of overloaded operators and the equivalent methods. The assignment forms of arithmetic operators (e.g. +=) are availlable if their normal counterpart is overloaded.

Addition: $x + $y implemented by the $x->add($y) method.
Increment: $x++ implemented by the $x->add(1) method.
Subtraction: $x - $y implemented by the $x->subtract($y) method
Decrement: $x-- implemented by the $x->subtract(1) method.
Multiplication: $x * $y implemented by the $x->multiply($y) method.
Division: $x / $y implemented by the $x->divide($y) method.
Exponentiation: $x ** $y implemented by the $x->exponentiate($y) method.
Sine: sin($x) implemented by the $x->sin() method.
Cosine: cos($x) implemented by the $x->cos() method.
Stringification "$x" is implemented by the $x->round() method.
Cast to a number (i.e. numeric context) is implemented by the $x->number() method.
Boolean context is implemented by the $x->number() method.
Unary minus -$x is implemented by the $x->multiply(-1) method.
Logical not is implemented via a boolean context.
Absolute value abs($x) is implemented via $x->abs().
Natural logarithm log($x) is implemented via $x->log().
Square Root sqrt($x) is implemented via $x->sqrt().
Numeric comparison operators $x == $y, $x != $y, etc. are implemented via $x-$<gtnumeric_cmp($y)>.
String comparison operators $x eq $y, $x ne $y, etc. are implemented via $x-$<gtfull_cmp($y)>. They might not do what you expect. Please read the documentation.

Here's a list of overloadable operations that aren't overloaded in the context of this module:

<< >> x . & ^ | atan2 int

CONSTRUCTORS

All constructors accept Math::BigFloat objects in place of numbers.

new

This is the basic constructor for Number::WithError objects.

New objects can be created in one of two ways:

The first argument is expected to be the number itself. Then come zero or more errors. Errors can either be a number, a reference to an array of two numbers, or undef. In the former case, the number is treated as an uncertainty which has the same magnitude in both directions. (I.e. +/- x) In case of an array reference, the first number is treated as the upper error boundary and the second as the lower boundary. (I.e. +x, -y) undef is treated as zero error.
The second way to create objects is passing a single string to the constructor which is efficiently parsed into a number and any number of errors. I'll explain the format with an example:
```
133.14e-5 +/- .1e-4 + 0.00002 - 1.0e-5 +/- .2e-4
```
In this example, the first number is parsed as the actual number. The following number is treated as a symmetric error (.1e-4) The two following numbers are treated as the upper and lower boundary for a single error. Then comes another ordinary error. It is also legal to define the lower boundary of an error before the upper boundary. (I.e. -1.0e-5 +0.00002)

Whitespace is insignificant.

For the sake of completeness, I'll mention the regular expression that is used to match numbers. It's taken from the official Perl FAQ to match floating point numbers:
```
[+-]?(?=\d|\.\d)\d*(?:\.\d*)?(?:[Ee][+-]?\d+)?
```
Don't worry if you don't understand it. Just run a few tests to see if it'll accept your numbers. Or go read perldoc -q float or pick up a book on C and read up on how they define floating point numbers.

Note that trailing zeros currently have no effect. (Yes, this is a BUG!)

The constructor returns a new object of this class or undef if something went wrong.

new_big

This is an alternative constructor for Number::WithError objects. It works exactly like new except that it makes all internal numbers instances of Math::BigFloat for high precision calculations.

The module does not load Math::BigFloat at compile time to avoid loading a big module that isn't needed all the time. Instead, this module makes use of the prefork pragma and loads Math::BigFloat when needed at run-time.

witherror

This constructor is not a method. It is a subroutine that can be exported to your namespace on demand. It works exactly as the new() method except it's a subroutine and shorter.

I'm normally not for this kind of shortcut in object-oriented code, but if you have to create a large number of Number::WithError numbers, you'll appreciate it. Trust me.

Note to authors of subclasses: If you inherit from this module, you'll need to implement your own witherror() because otherwise, it will still return objects of this class, not your subclass.

witherror_big

This is also not a method. It does the same as witherror(). It can also be optionally be exported to your namespace.

It uses the new_big constructor instead of the new constructor used by witherror().

ARITHMETIC METHODS

All of these methods implement an arithmetic operation on the object and the method's first parameter.

The methods aren't mutators. That means they don't modify the object itself, but return the result of the operation as a new object.

All of the methods accept either a plain number, a Number::WithError object or anything that is understood by the constructors as argument,

All errors are correctly propagated using Gaussian Error Propagation. The formulae used for this are mentioned in the individual methods' documentation.

add

Adds the object a and the argument b. Returns a new object c.

Formula: c = a + b

Error Propagation: err_c = sqrt( err_a^2 + err_b^2 )

subtract

Subtracts the argument b from the object a. Returns a new object c.

Formula: c = a - b

Error Propagation: err_c = sqrt( err_a^2 + err_b^2 )

multiply

Multiplies the object a and the argument b. Returns a new object c.

Formula: c = a * b

Error Propagation: err_c = sqrt( b^2 * err_a^2 + a^2 * err_b^2 )

divide

Divides the object a by the argument b. Returns a new object c.

Formula: c = a / b

Error Propagation: err-c = sqrt( err_a^2 / b^2 + a^2 * err_b^2 / b^4 )

exponentiate

Raises the object a to the power of the argument b. Returns a new object c. Returns undef if a is negative because the error cannot be propagated in that case. (Can't take log of a negative value.)

Also, please have a look at the error propagation formula below. Exponentiation and logarithms are operations that can become numerically unstable very easily.

Formula: c = a ^ b

Error Propagation: err-c = sqrt( b^2 * a^(b-1) * err_a^2 + ln(a)^2 * a^b * err_b^2 )

METHODS FOR BUILTIN FUNCTIONS

These methods calculate functions of the object and return the result as a new object.

sqrt

Calculates the square root of the object a and returns the result as a new object c. Returns undef if a is negative.

Formula: c = sqrt(a)

Error Propagation: err-c = sqrt( err-a^2 / (2*sqrt(a))^2 ) = abs( err-a / (2*sqrt(a)) )

log

Calculates the natural logarithm of an object a. Returns a new object c. If a is negative, the function returns undef.

Formula: c = log(a)

Error Propagation: err-c = sqrt( err-a^2 / a^2 ) = abs( err-a / a )

sin

Calculates the sine of the object a and returns the result as a new object c.

Formula: c = sin(a)

Error Propagation: err-c = sqrt( cos(a)^2 * err-a^2 ) = abs( cos(a) * err-a )

cos

Calculates the cosine of the object a and returns the result as a new object c.

Formula: c = cos(a)

Error Propagation: err-c = sqrt( sin(a)^2 * err-a^2 ) = abs( sin(a) * err-a )

tan

Calculates the tangent of the object a and returns the result as a new object c.

Formula: c = tan(a)

Error Propagation: err-c = sqrt( err-a^2 / cos(a)^4 ) = abs( err-a / cos(a)^2 )

Since there is no built-in tan() function, this operation is not availlable via the overloaded interface.

abs

Calculates the absolute value of an object a. Leaves the errors untouched. Returns a new object c.

Formula: c = abs(a)

Error Propagation: err-c = err-a

ROUNDING, STRINGIFICATION AND OUTPUT METHODS

This section documents methods dealing with the extraction of data from the object. The methods implement rounding of numbers, stringification of the object and extracting meta information like the significant digit.

number

Determines the significant digit using the significant_digit() method, rounds the number that the object number() is called on represents to that digit and returns the rounded number.

Regardless of the internal representation of the number, this returns an unblessed string / an unblessed floating point number.

To gain access to the raw number representation in the object, use the raw_number method.

Either way, the number will be in scientific notation. That means the first non-zero digit comes before the decimal point and following the decimal point and any number of digits is an exponent in eXXX notation.

raw_number

This method returns the internal representation of the number in the object. It does not round as appropriate. It does not clone Math::BigFloat objects either. So make sure you do that if necessary!

round

This method determines the significant digit using the significant_digit() method. Then, it rounds the number represented by the object and all associated errors to that digit.

Then, the method concatenates the number with its errors and returns the resulting string. In case of symmetric errors, the string +/- will be prepended to the error. In case of asymmetric errors, a + will be prepended to the first/upper error component and a - to the second/lower error component.

Returns the previously described string.

significant_digit

This method returns the significant digit of the number it is called on as an integer. If the number has no errors or all errors are undef or zero, this method returns undef.

The return value of this method is to be interpreted as follows: If this method returns -5, the significant digit is 1 * 10**-5 or 0.00001. If it returns 3, the significant digit is 1 * 10**3 or 1000. If it returns 0, the significant digit is 1.

The return value is computed by the following algorithm: The individual significant digit of a single error is: Take the exponent of the first non-zero digit in the error. The digit after this first non-zero digit is the significant one.

This method returns the minimum of the individual significant digits of all errors.

That means:

5 +/- 0.0132 + 0.5 - 1

Will yield a return value of -3 since the first error has the lowest significant digit.

This algorithm is also used for determining the significant digit for rounding. It is extremely important that you realize this isn't carved in stone. The way the significant digit is computed in the presence of errors is merely a convention. In this case, it stems from particle physics. It might well be that in your particular scientific community, there are other conventions. One, for example, is to use the second non-zero digit only if the first is a 1.

error

This method returns a reference to an array of errors of the object it is called on.

Unlike the raw_error() method, this method takes proper care to copy all objects and references to defy action at a distance. The structure of the returned array reference is akin to that returned by raw_error().

Furthermore, this method rounds all errors to the significant digit as determined by significant_digit().

raw_error

Returns the internal representation of the errors of the current object. Note that (just like raw_number(), this does not clone the data for safe use without action at a distance. Instead, it directly returns the internal reference to the error structure. The structure is an array of errors. Each error may either be a string or floating point number or a Math::BigFloat object or an array reference. In case of an array reference, it is an asymmetric error. The inner array contains two strings/numbers/Math::BigFloats.

Note that this practically breaks encapsulation and code relying on it might break with future releases.

COMPARISON

This section lists methods that implement different comparisons between objects.

numeric_cmp

This method implements a numeric comparison of two numbers. It compares the object it is called on to the first argument of the method. If the first argument is omitted or undefined, the method returns undef.

Numeric comparison means in this case that the represented numbers will be rounded and then compared. If you would like a comparison that takes care of errors, please have a look at the full_cmp() method.

The method returns -1 if the rounded number represented by the object is numerically less than the rounded number represented by the first argument. It returns 0 if they are equal and 1 if the object's rounded number is more than that of the argument.

This method implements the overloaded numeric comparison operations.

full_cmp

This method implements a full comparison of two objects. That means, it takes their numeric values, rounds them and compares them just like the numeric_cmp() method.

If, however, the numbers are equal, this method iterates over the errors, rounds them and then compares them. If all errors are equal, this method returns 0. If an error is found to differ, the method returns 1 in case the object's error is larger and -1 in case the argument's error is larger.

Comparing an asymmetric error to a symmetric error is a special case. It can never be the same error, hence the method will not return 0. Instead, it guesses which error is larger by using the upper error bound of the asymmetric error. (Well, yes, not very useful.)

SUPPORT

Bugs should be reported via the CPAN bug tracker at

http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Number-WithError

For other issues, contact the author.

AUTHOR

Steffen Mueller <modules at steffen-mueller dot net>, http://steffen-mueller.net/

COPYRIGHT

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

To install Number::WithError, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Number::WithError

CPAN shell

perl -MCPAN -e shell
install Number::WithError

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)