/ 
RPi-SPI-2.36.2
River stage one • 2 direct dependents • 2 total dependents
/ RPi::SPI

NAME

RPi::SPI - Communicate with devices over the Serial Peripheral Interface (SPI) bus on Raspberry Pi

SYNOPSIS

my $channel = 0;

my $spi = RPi::SPI->new($channel);

my $buf = [0x01, 0x02];
my $len = 2;

$buf = $spi->rw($buf, $len);

# write occurs, then a read, and the read buffer overwrites the
# write TX buffer, so the read data is in the write buffer after the call

print "$_\n" for @$buf;

DESCRIPTION

This distribution provides you the ability to communicate with devices attached to the channels on the Serial Peripheral Interface (SPI) bus. Although it was designed for the Raspberry Pi, that's not a hard requirement, and it should work on any Unix-type system that has support for SPI.

METHODS

new

Instantiates a new RPi::SPI instance, prepares a specific SPI bus channel for use, then returns the object.

Parameters:

$channel

The SPI bus channel to initialize.

Mandatory: Integer, 0 for /dev/spidev0.0 or 1 for /dev/spidev0.1.

$speed

Optional, Integer. The data rate to communicate on the bus using. Defaults to 1000000 (1MHz).

Dies if we can't open the SPI bus.

rw

Writes specified data to the bus on the channel specified in new(), then after completion, does a read of the bus and re-populates the write buffer with the freshly read data.

Parameters:

$buf

Mandatory: Array reference where each element is an unsigned char (0-255). This array is the write buffer; the data we'll be sending to the SPI bus.

$len

Mandatory: Integer, the number of array elements in the $buf parameter sent in above.

Return: The write buffer, after being re-populated with the read data.

Dies if we can't open the SPI bus.

AUTHOR

Steve Bertrand, <steveb at cpan.org>

LICENSE AND COPYRIGHT

Copyright 2017 Steve Bertrand.

This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License.

See http://dev.perl.org/licenses/ for more information.