/ 
App-sdif-3.1.1
River stage one • 3 direct dependents • 3 total dependents
/ sdif

NAME

sdif - side-by-side diff viewer for ANSI terminal

SYNOPSIS

sdif file_1 file_2

diff ... | sdif

--number, -n	print line number
--digit=#		set the line number digits (default 4)
--truncate, -t	truncate long line
--onword		fold line on word boundaries
--context, -c, -C#	context diff
--unified, -u, -U#	unified diff

--width=#, -W#	specify width of output (default 80)
--[no]color		use color or not (default on)
--colormap, --cm	specify color map
--colortable	show color table
--[no]256		on/off ANSI 256 color mode (default on)
--mark=position	mark position (right, left, center, side) or no
--view, -v		viewer mode

--man		display manual page
--diff=s		set diff command
--diffopts=s	set diff command options

--cdif		use ``cdif'' as word context diff backend
--cdifopts=s	set cdif command options
--mecab		pass --mecab option to cdif

DESCRIPTION

sdif is inspired by System V sdiff(1) command. The basic feature of sdif is making a side-by-side listing of two different files. All contents of two files are listed on left and right sides. Center column is used to indicate how different those lines. No mark means no difference. Added, deleted and modified lines are marked with `-' and `+' character.

1 deleted  -
2 same          1 same
3 changed  -+   2 modified
4 same          3 same
            +   4 added

It also reads and formats the output from diff command from standard input. Besides normal diff output, context diff -c and unified diff -u output will be handled properly. Combined diff format is also supported, but currently limited up to three files.

Each lines can be displayed in different colors. Read --colormap section in this manual for detail.

While sdif doesn't care about the contents of each modified lines, it can read the output from cdif command which show the word context differences of each lines. Option --cdif set the appropriate options for cdif. Set --nocc, --nomc options at least when invoking cdif manually. Option --notc is preferable because text color can be handled by sdif.

Environment valuable SDIFOPTS is used to set default options.

OPTIONS

--width=width, -W width

Use width as a width of output listing. Default width is 80. If the standard error is assigned to a terminal, the width is taken from it if possible.

--number, -n

Print line number on each lines.

--digit=n

Line number is displayed in 4 digits by default. Use this option to change it.

-c, -Cn, -u, -Un

Passed through to the back-end diff command. Sdif can interpret the output from normal, context (diff -c) and unified diff (diff -u).

--truncate, -t

Truncate lines if they are longer than printing width.

--onword

Fold long line at word boundaries.

--cdif

Use cdif command instead of normal diff command.

--cdifopts=option

Specify options for back-end cdif command.

--mecab

Pass --mecab option to back-end cdif command. Use --cdifopts to set other options.

--diff=command

Any command can be specified as a diff command to be used. Piping output to sdif is easier unless you want to get whole text.

--diffopts=option

Specify options for back-end diff command.

--mark=position

Specify the position for a mark. Choose from left, right, center, side or no. Default is center.

--[no]color

Use ANSI color escape sequence for output. Default is true.

--[no]256

Use ANSI 256 color mode. Default is true.

--colortable

Show table of ANSI 216 colors.

--view, -v

Viewer mode. Display two files side-by-side in straightforward order.

--colormap=colormap, --cm=colormap

Basic colormap format is :

FIELD=COLOR

where the FIELD is one from these :

OLD       NEW       MERGED    UNCHANGED
--------- --------- --------- ---------
OCOMMAND  NCOMMAND  MCOMMAND           : Command line
OFILE     NFILE     MFILE              : File name
OMARK     NMARK     MMARK     UMARK    : Mark
OLINE     NLINE     MLINE     ULINE    : Line number
OTEXT     NTEXT     MTEXT     UTEXT    : Text

If UMARK and/or ULINE is empty, OMARK/NMARK and/or OLINE/NLINE are used instead.

You can make multiple fields same color joining them by = :

FIELD1=FIELD2=...=COLOR

Also wildcard can be used for field name :

*CHANGE=BDw

Multiple fields can be specified by repeating options

--cm FILED1=COLOR1 --cm FIELD2=COLOR2 ...

or combined with comma (,) :

--cm FILED1=COLOR1,FIELD2=COLOR2, ...

COLOR is a combination of single character representing uppercase foreground color :

R  Red
G  Green
B  Blue
C  Cyan
M  Magenta
Y  Yellow
K  Black
W  White

and alternative (usually brighter) colors in lowercase :

r, g, b, c, m, y, k, w

or RGB values and 24 grey levels if using ANSI 256 or full color terminal :

FORMAT:
    foreground[/background]

COLOR:
    000 .. 555       : 6 x 6 x 6 216 colors
    000000 .. FFFFFF : 24bit RGB mapped to 216 colors
    L00 .. L23       : 24 grey levels

Sample:
    005     0000FF        : blue foreground
       /505       /FF00FF : magenta background
    000/555 000000/FFFFFF : black on white
    500/050 FF0000/00FF00 : red on green

and other effects :

S  Stand-out (reverse video)
U  Underline
D  Double-struck (boldface)
F  Flash (blink)
E  Expand

E is effective for command, file and text line. That line will be expanded to window width filling up by space characters. Left column is expanded always. You may want to use this to set background color for right column.

Defaults are :

OCOMMAND => "555/010E"  or "GSE"
NCOMMAND => "555/010E"  or "GSE"
MCOMMAND => "555/010E"  or "GSE"
OFILE    => "555/010DE" or "GSDE"
NFILE    => "555/010DE" or "GSDE"
MFILE    => "555/010DE" or "GSDE"
OMARK    => "010/444"   or "G/W"
NMARK    => "010/444"   or "G/W"
MMARK    => "010/444"   or "G/W"
UMARK    => ""
OLINE    => "220"       or  "Y"
NLINE    => "220"       or  "Y"
MLINE    => "220"       or  "Y"
ULINE    => ""
OTEXT    => "KE/454"    or "G"
NTEXT    => "KE/454"    or "G"
MTEXT    => "KE/454"    or "G"
UTEXT    => ""

This is equivalent to :

sdif --cm '?COMMAND=555/010E,?FILE=555/010DE' \
     --cm '?MARK=010/444,UMARK=' \
     --cm '?LINE=220,ULINE=' \
     --cm '?TEXT=KE/454,UTEXT='

AUTHOR

Kazumasa Utashiro
https://github.com/kaz-utashiro/sdif-tools

SEE ALSO

cdif(1), watchdiff(1)

Getopt::EX::Colormap