NAME

RFID::Libnfc::Constants

SYNOPSIS

    use RFID::Libnfc::Constants;
    
    or

    use RFID::Libnfc::Constants qw(<category>);

    where <category> can be any of :
    * NDO
    * IM
    * MC
    * MU
    * NMT
    * NBR
    

DESCRIPTION

    Constants used within RFID::Libnfc

CATEGORIES

• NDO

   NDO_HANDLE_CRC => 0x00,
       Let the PN53X chip handle the CRC bytes. This means that the chip appends
       the CRC bytes to the frames that are transmitted. It will parse the last
       bytes from received frames as incoming CRC bytes. They will be verified
       against the used modulation and protocol. If an frame is expected with
       incorrect CRC bytes this option should be disabled. Example frames where
       this is useful are the ATQA and UID+BCC that are transmitted without CRC
       bytes during the anti-collision phase of the ISO14443-A protocol. 
  
   NDO_HANDLE_PARITY => 0x01,
       Parity bits in the network layer of ISO14443-A are by default generated and
       validated in the PN53X chip. This is a very convenient feature. On certain
       times though it is useful to get full control of the transmitted data. The
       proprietary MIFARE Classic protocol uses for example custom (encrypted)
       parity bits. For interoperability it is required to be completely
       compatible, including the arbitrary parity bits. When this option is
       disabled, the functions to communicating bits should be used. 
  
   NDO_ACTIVATE_FIELD => 0x10,
       This option can be used to enable or disable the electronic field of the
       NFC device. 
  
   NDO_ACTIVATE_CRYPTO1 => 0x11,
       The internal CRYPTO1 co-processor can be used to transmit messages
       encrypted. This option is automatically activated after a successful MIFARE
       Classic authentication. 
  
   NDO_INFINITE_SELECT => 0x20,
       The default configuration defines that the PN53X chip will try indefinitely
       to invite a tag in the field to respond. This could be desired when it is
       certain a tag will enter the field. On the other hand, when this is
       uncertain, it will block the application. This option could best be compared
       to the (NON)BLOCKING option used by (socket)network programming. 
  
   NDO_ACCEPT_INVALID_FRAMES => 0x30,
       If this option is enabled, frames that carry less than 4 bits are allowed.
       According to the standards these frames should normally be handles as
       invalid frames. 
  
   NDO_ACCEPT_MULTIPLE_FRAMES => 0x31,
       If the NFC device should only listen to frames, it could be useful to let
       it gather multiple frames in a sequence. They will be stored in the internal
       FIFO of the PN53X chip. This could be retrieved by using the receive data
       functions. Note that if the chip runs out of bytes (FIFO => 64 bytes long),
       it will overwrite the first received frames, so quick retrieving of the
       received data is desirable. 
  
   NDO_AUTO_ISO14443_4 => 0x40,
       This option can be used to enable or disable the auto-switching mode to
       ISO14443-4 is device is compliant.
       In initiator mode, it means that NFC chip will send RATS automatically when
       select and it will automatically poll for ISO14443-4 card when ISO14443A is
       requested.
       In target mode, with a NFC chip compiliant (ie. PN532), the chip will
       emulate a 14443-4 PICC using hardware capability 
  
   NDO_EASY_FRAMING => 0x41,
       Use automatic frames encapsulation and chaining. 
  
   NDO_FORCE_ISO14443_A => 0x42,
       Force the chip to switch in ISO14443-A 

• IM

   IM_ISO14443A_106  => 0x00,
  
   IM_FELICA_212     => 0x01,
  
   IM_FELICA_424     => 0x02,
  
   IM_ISO14443B_106  => 0x03,
  
   IM_JEWEL_106      => 0x04

• MC

   MC_AUTH_A         => 0x60,
  
   MC_AUTH_B         => 0x61,
  
   MC_READ           => 0x30,
  
   MC_WRITE          => 0xA0,
  
   MC_TRANSFER       => 0xB0,
  
   MC_DECREMENT      => 0xC0,
  
   MC_INCREMENT      => 0xC1,
  
   MC_STORE          => 0xC2

• MU

   MU_REQA           => 0x26,
  
   MU_WUPA           => 0x52,
  
   MU_SELECT1        => 0x93,
  
   MU_SELECT2        => 0x95,
  
   MU_READ           => 0x30,
  
   MU_WRITE          => 0xA2,
  
   MU_CWRITE         => 0xA0,
  
   MU_HALT           => 0x50

• NMT

   NMT_ISO14443A     => 0,
  
   NMT_ISO14443B     => 1,
  
   NMT_FELICA        => 2,
  
   NMT_JEWEL         => 3,
  
   NMT_DEP           => 4

• NBR

   NBR_UNDEFINED     => 0,
  
   NBR_106           => 1,
  
   NBR_212           => 2,
  
   NBR_424           => 3,
  
   NBR_847           => 4

• NC

   NC_PN531          => 0x10
  
   NC_PN532          => 0x20
  
   NC_PN533          => 0x30

SEE ALSO

RFID::Libnfc RFID::Libnfc::Device RFID::Libnfc::TargetInfo RFID::Libnfc::Constants

< check also documentation for libnfc c library [ http://www.libnfc.org/documentation/introduction ] >

AUTHOR

xant

COPYRIGHT AND LICENSE

Copyright (C) 2009 by xant <xant@cpan.org>

This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.8 or, at your option, any later version of Perl 5 you may have available.