NAME

Paws::SES - Perl Interface to AWS Amazon Simple Email Service

SYNOPSIS

use Paws;

my $obj = Paws->service('SES');
my $res = $obj->Method(
  Arg1 => $val1,
  Arg2 => [ 'V1', 'V2' ],
  # if Arg3 is an object, the HashRef will be used as arguments to the constructor
  # of the arguments type
  Arg3 => { Att1 => 'Val1' },
  # if Arg4 is an array of objects, the HashRefs will be passed as arguments to
  # the constructor of the arguments type
  Arg4 => [ { Att1 => 'Val1'  }, { Att1 => 'Val2' } ],
);

DESCRIPTION

Amazon Simple Email Service

This document contains reference information for the Amazon Simple Email Service (https://aws.amazon.com/ses/) (Amazon SES) API, version 2010-12-01. This document is best used in conjunction with the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/Welcome.html).

For a list of Amazon SES endpoints to use in service requests, see Regions and Amazon SES (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/regions.html) in the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/Welcome.html).

For the AWS API documentation, see https://docs.aws.amazon.com/ses/

METHODS

CloneReceiptRuleSet

OriginalRuleSetName => Str
RuleSetName => Str

Each argument is described in detail in: Paws::SES::CloneReceiptRuleSet

Returns: a Paws::SES::CloneReceiptRuleSetResponse instance

Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set.

For information about setting up rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-receipt-rule-set.html).

You can execute this operation no more than once per second.

CreateConfigurationSet

ConfigurationSet => Paws::SES::ConfigurationSet

Each argument is described in detail in: Paws::SES::CreateConfigurationSet

Returns: a Paws::SES::CreateConfigurationSetResponse instance

Creates a configuration set.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html).

You can execute this operation no more than once per second.

CreateConfigurationSetEventDestination

ConfigurationSetName => Str
EventDestination => Paws::SES::EventDestination

Each argument is described in detail in: Paws::SES::CreateConfigurationSetEventDestination

Returns: a Paws::SES::CreateConfigurationSetEventDestinationResponse instance

Creates a configuration set event destination.

When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).

An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html).

You can execute this operation no more than once per second.

CreateConfigurationSetTrackingOptions

ConfigurationSetName => Str
TrackingOptions => Paws::SES::TrackingOptions

Each argument is described in detail in: Paws::SES::CreateConfigurationSetTrackingOptions

Returns: a Paws::SES::CreateConfigurationSetTrackingOptionsResponse instance

Creates an association between a configuration set and a custom domain for open and click event tracking.

By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/configure-custom-open-click-domains.html).

CreateCustomVerificationEmailTemplate

FailureRedirectionURL => Str
FromEmailAddress => Str
SuccessRedirectionURL => Str
TemplateContent => Str
TemplateName => Str
TemplateSubject => Str

Each argument is described in detail in: Paws::SES::CreateCustomVerificationEmailTemplate

Returns: nothing

Creates a new custom verification email template.

For more information about custom verification email templates, see Using Custom Verification Email Templates (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/custom-verification-emails.html) in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

CreateReceiptFilter

Filter => Paws::SES::ReceiptFilter

Each argument is described in detail in: Paws::SES::CreateReceiptFilter

Returns: a Paws::SES::CreateReceiptFilterResponse instance

Creates a new IP address filter.

For information about setting up IP address filters, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-ip-filters.html).

You can execute this operation no more than once per second.

CreateReceiptRule

Rule => Paws::SES::ReceiptRule
RuleSetName => Str
[After => Str]

Each argument is described in detail in: Paws::SES::CreateReceiptRule

Returns: a Paws::SES::CreateReceiptRuleResponse instance

Creates a receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-receipt-rules.html).

You can execute this operation no more than once per second.

CreateReceiptRuleSet

RuleSetName => Str

Each argument is described in detail in: Paws::SES::CreateReceiptRuleSet

Returns: a Paws::SES::CreateReceiptRuleSetResponse instance

Creates an empty receipt rule set.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-receipt-rule-set.html).

You can execute this operation no more than once per second.

CreateTemplate

Template => Paws::SES::Template

Each argument is described in detail in: Paws::SES::CreateTemplate

Returns: a Paws::SES::CreateTemplateResponse instance

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-personalized-email-api.html).

You can execute this operation no more than once per second.

DeleteConfigurationSet

ConfigurationSetName => Str

Each argument is described in detail in: Paws::SES::DeleteConfigurationSet

Returns: a Paws::SES::DeleteConfigurationSetResponse instance

Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html).

You can execute this operation no more than once per second.

DeleteConfigurationSetEventDestination

ConfigurationSetName => Str
EventDestinationName => Str

Each argument is described in detail in: Paws::SES::DeleteConfigurationSetEventDestination

Returns: a Paws::SES::DeleteConfigurationSetEventDestinationResponse instance

Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html).

You can execute this operation no more than once per second.

DeleteConfigurationSetTrackingOptions

ConfigurationSetName => Str

Each argument is described in detail in: Paws::SES::DeleteConfigurationSetTrackingOptions

Returns: a Paws::SES::DeleteConfigurationSetTrackingOptionsResponse instance

Deletes an association between a configuration set and a custom domain for open and click event tracking.

Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains.

DeleteCustomVerificationEmailTemplate

TemplateName => Str

Each argument is described in detail in: Paws::SES::DeleteCustomVerificationEmailTemplate

Returns: nothing

Deletes an existing custom verification email template.

You can execute this operation no more than once per second.

DeleteIdentity

Identity => Str

Each argument is described in detail in: Paws::SES::DeleteIdentity

Returns: a Paws::SES::DeleteIdentityResponse instance

Deletes the specified identity (an email address or a domain) from the list of verified identities.

You can execute this operation no more than once per second.

DeleteIdentityPolicy

Identity => Str
PolicyName => Str

Each argument is described in detail in: Paws::SES::DeleteIdentityPolicy

Returns: a Paws::SES::DeleteIdentityPolicyResponse instance

Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html).

You can execute this operation no more than once per second.

DeleteReceiptFilter

FilterName => Str

Each argument is described in detail in: Paws::SES::DeleteReceiptFilter

Returns: a Paws::SES::DeleteReceiptFilterResponse instance

Deletes the specified IP address filter.

For information about managing IP address filters, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-ip-filters.html).

You can execute this operation no more than once per second.

DeleteReceiptRule

RuleName => Str
RuleSetName => Str

Each argument is described in detail in: Paws::SES::DeleteReceiptRule

Returns: a Paws::SES::DeleteReceiptRuleResponse instance

Deletes the specified receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rules.html).

You can execute this operation no more than once per second.

DeleteReceiptRuleSet

RuleSetName => Str

Each argument is described in detail in: Paws::SES::DeleteReceiptRuleSet

Returns: a Paws::SES::DeleteReceiptRuleSetResponse instance

Deletes the specified receipt rule set and all of the receipt rules it contains.

The currently active rule set cannot be deleted.

For information about managing receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rule-sets.html).

You can execute this operation no more than once per second.

DeleteTemplate

TemplateName => Str

Each argument is described in detail in: Paws::SES::DeleteTemplate

Returns: a Paws::SES::DeleteTemplateResponse instance

Deletes an email template.

You can execute this operation no more than once per second.

DeleteVerifiedEmailAddress

EmailAddress => Str

Each argument is described in detail in: Paws::SES::DeleteVerifiedEmailAddress

Returns: nothing

Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.

DescribeActiveReceiptRuleSet

Each argument is described in detail in: Paws::SES::DescribeActiveReceiptRuleSet

Returns: a Paws::SES::DescribeActiveReceiptRuleSetResponse instance

Returns the metadata and receipt rules for the receipt rule set that is currently active.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-receipt-rule-set.html).

You can execute this operation no more than once per second.

DescribeConfigurationSet

ConfigurationSetName => Str
[ConfigurationSetAttributeNames => ArrayRef[Str|Undef]]

Each argument is described in detail in: Paws::SES::DescribeConfigurationSet

Returns: a Paws::SES::DescribeConfigurationSetResponse instance

Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html).

You can execute this operation no more than once per second.

DescribeReceiptRule

RuleName => Str
RuleSetName => Str

Each argument is described in detail in: Paws::SES::DescribeReceiptRule

Returns: a Paws::SES::DescribeReceiptRuleResponse instance

Returns the details of the specified receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-receipt-rules.html).

You can execute this operation no more than once per second.

DescribeReceiptRuleSet

RuleSetName => Str

Each argument is described in detail in: Paws::SES::DescribeReceiptRuleSet

Returns: a Paws::SES::DescribeReceiptRuleSetResponse instance

Returns the details of the specified receipt rule set.

For information about managing receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rule-sets.html).

You can execute this operation no more than once per second.

GetAccountSendingEnabled

=>

Each argument is described in detail in: Paws::SES::GetAccountSendingEnabled

Returns: a Paws::SES::GetAccountSendingEnabledResponse instance

Returns the email sending status of the Amazon SES account for the current region.

You can execute this operation no more than once per second.

GetCustomVerificationEmailTemplate

TemplateName => Str

Each argument is described in detail in: Paws::SES::GetCustomVerificationEmailTemplate

Returns: a Paws::SES::GetCustomVerificationEmailTemplateResponse instance

Returns the custom email verification template for the template name you specify.

You can execute this operation no more than once per second.

GetIdentityDkimAttributes

Identities => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::SES::GetIdentityDkimAttributes

Returns: a Paws::SES::GetIdentityDkimAttributesResponse instance

Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published.

This operation takes a list of identities as input and returns the following information for each:

Whether Easy DKIM signing is enabled or disabled.
A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.
Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

This operation is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/easy-dkim-dns-records.html).

GetIdentityMailFromDomainAttributes

Identities => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::SES::GetIdentityMailFromDomainAttributes

Returns: a Paws::SES::GetIdentityMailFromDomainAttributesResponse instance

Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains).

This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

GetIdentityNotificationAttributes

Identities => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::SES::GetIdentityNotificationAttributes

Returns: a Paws::SES::GetIdentityNotificationAttributesResponse instance

Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes.

This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/notifications.html).

GetIdentityPolicies

Identity => Str
PolicyNames => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::SES::GetIdentityPolicies

Returns: a Paws::SES::GetIdentityPoliciesResponse instance

Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

You can execute this operation no more than once per second.

GetIdentityVerificationAttributes

Identities => ArrayRef[Str|Undef]

Each argument is described in detail in: Paws::SES::GetIdentityVerificationAttributes

Returns: a Paws::SES::GetIdentityVerificationAttributesResponse instance

Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity.

The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning.

For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning.

This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

GetSendQuota

=>

Each argument is described in detail in: Paws::SES::GetSendQuota

Returns: a Paws::SES::GetSendQuotaResponse instance

Provides the sending limits for the Amazon SES account.

You can execute this operation no more than once per second.

GetSendStatistics

=>

Each argument is described in detail in: Paws::SES::GetSendStatistics

Returns: a Paws::SES::GetSendStatisticsResponse instance

Provides sending statistics for the current AWS Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time.

You can execute this operation no more than once per second.

GetTemplate

TemplateName => Str

Each argument is described in detail in: Paws::SES::GetTemplate

Returns: a Paws::SES::GetTemplateResponse instance

Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify.

You can execute this operation no more than once per second.

ListConfigurationSets

[MaxItems => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::SES::ListConfigurationSets

Returns: a Paws::SES::ListConfigurationSetsResponse instance

Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html) in the Amazon SES Developer Guide.

You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.

ListCustomVerificationEmailTemplates

[MaxResults => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::SES::ListCustomVerificationEmailTemplates

Returns: a Paws::SES::ListCustomVerificationEmailTemplatesResponse instance

Lists the existing custom verification email templates for your account in the current AWS Region.

You can execute this operation no more than once per second.

ListIdentities

[IdentityType => Str]
[MaxItems => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::SES::ListIdentities

Returns: a Paws::SES::ListIdentitiesResponse instance

Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status.

You can execute this operation no more than once per second.

ListIdentityPolicies

Identity => Str

Each argument is described in detail in: Paws::SES::ListIdentityPolicies

Returns: a Paws::SES::ListIdentityPoliciesResponse instance

Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

You can execute this operation no more than once per second.

ListReceiptFilters

Each argument is described in detail in: Paws::SES::ListReceiptFilters

Returns: a Paws::SES::ListReceiptFiltersResponse instance

Lists the IP address filters associated with your AWS account in the current AWS Region.

For information about managing IP address filters, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-ip-filters.html).

You can execute this operation no more than once per second.

ListReceiptRuleSets

[NextToken => Str]

Each argument is described in detail in: Paws::SES::ListReceiptRuleSets

Returns: a Paws::SES::ListReceiptRuleSetsResponse instance

Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries.

For information about managing receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rule-sets.html).

You can execute this operation no more than once per second.

ListTemplates

[MaxItems => Int]
[NextToken => Str]

Each argument is described in detail in: Paws::SES::ListTemplates

Returns: a Paws::SES::ListTemplatesResponse instance

Lists the email templates present in your Amazon SES account in the current AWS Region.

You can execute this operation no more than once per second.

ListVerifiedEmailAddresses

=>

Each argument is described in detail in: Paws::SES::ListVerifiedEmailAddresses

Returns: a Paws::SES::ListVerifiedEmailAddressesResponse instance

Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

PutConfigurationSetDeliveryOptions

ConfigurationSetName => Str
[DeliveryOptions => Paws::SES::DeliveryOptions]

Each argument is described in detail in: Paws::SES::PutConfigurationSetDeliveryOptions

Returns: a Paws::SES::PutConfigurationSetDeliveryOptionsResponse instance

Adds or updates the delivery options for a configuration set.

PutIdentityPolicy

Identity => Str
Policy => Str
PolicyName => Str

Each argument is described in detail in: Paws::SES::PutIdentityPolicy

Returns: a Paws::SES::PutIdentityPolicyResponse instance

Adds or updates a sending authorization policy for the specified identity (an email address or a domain).

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

You can execute this operation no more than once per second.

ReorderReceiptRuleSet

RuleNames => ArrayRef[Str|Undef]
RuleSetName => Str

Each argument is described in detail in: Paws::SES::ReorderReceiptRuleSet

Returns: a Paws::SES::ReorderReceiptRuleSetResponse instance

Reorders the receipt rules within a receipt rule set.

All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.

For information about managing receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rule-sets.html).

You can execute this operation no more than once per second.

SendBounce

BouncedRecipientInfoList => ArrayRef[Paws::SES::BouncedRecipientInfo]
BounceSender => Str
OriginalMessageId => Str
[BounceSenderArn => Str]
[Explanation => Str]
[MessageDsn => Paws::SES::MessageDsn]

Each argument is described in detail in: Paws::SES::SendBounce

Returns: a Paws::SES::SendBounceResponse instance

Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it.

You cannot use this API to send generic bounces for mail that was not received by Amazon SES.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email.html).

You can execute this operation no more than once per second.

SendBulkTemplatedEmail

Destinations => ArrayRef[Paws::SES::BulkEmailDestination]
Source => Str
Template => Str
[ConfigurationSetName => Str]
[DefaultTags => ArrayRef[Paws::SES::MessageTag]]
[DefaultTemplateData => Str]
[ReplyToAddresses => ArrayRef[Str|Undef]]
[ReturnPath => Str]
[ReturnPathArn => Str]
[SourceArn => Str]
[TemplateArn => Str]

Each argument is described in detail in: Paws::SES::SendBulkTemplatedEmail

Returns: a Paws::SES::SendBulkTemplatedEmailResponse instance

Composes an email message to multiple destinations. The message body is created using an email template.

In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:

The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html) in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.
The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.

SendCustomVerificationEmail

EmailAddress => Str
TemplateName => Str
[ConfigurationSetName => Str]

Each argument is described in detail in: Paws::SES::SendCustomVerificationEmail

Returns: a Paws::SES::SendCustomVerificationEmailResponse instance

Adds an email address to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address.

To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/custom-verification-emails.html) in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

SendEmail

Destination => Paws::SES::Destination
Message => Paws::SES::Message
Source => Str
[ConfigurationSetName => Str]
[ReplyToAddresses => ArrayRef[Str|Undef]]
[ReturnPath => Str]
[ReturnPathArn => Str]
[SourceArn => Str]
[Tags => ArrayRef[Paws::SES::MessageTag]]

Each argument is described in detail in: Paws::SES::SendEmail

Returns: a Paws::SES::SendEmailResponse instance

Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements:

The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html) in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.

For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/manage-sending-limits.html) in the Amazon SES Developer Guide.

SendRawEmail

RawMessage => Paws::SES::RawMessage
[ConfigurationSetName => Str]
[Destinations => ArrayRef[Str|Undef]]
[FromArn => Str]
[ReturnPathArn => Str]
[Source => Str]
[SourceArn => Str]
[Tags => ArrayRef[Paws::SES::MessageTag]]

Each argument is described in detail in: Paws::SES::SendRawEmail

Returns: a Paws::SES::SendRawEmailResponse instance

Composes an email message and immediately queues it for sending.

This operation is more flexible than the SendEmail API operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you want to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments.

The SendRawEmail operation has the following requirements:

You can only send email from verified email addresses or domains (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html). If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.
If your account is still in the Amazon SES sandbox (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/request-production-access.html), you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mailbox-simulator.html).
The maximum message size, including attachments, is 10 MB.
Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.
If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.
Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.
Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-raw.html#send-email-mime-encoding) in the Amazon SES Developer Guide.

Additionally, keep the following considerations in mind when using the SendRawEmail operation:

Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides.
If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:
- X-SES-SOURCE-ARN
- X-SES-FROM-ARN
- X-SES-RETURN-PATH-ARN
Don't include these X-headers in the DKIM signature. Amazon SES removes these before it sends the email.

If you only specify the SourceIdentityArn parameter, Amazon SES sets the From and Return-Path addresses to the same identity that you specified.

For more information about sending authorization, see the Using Sending Authorization with Amazon SES (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html) in the Amazon SES Developer Guide.
For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/manage-sending-limits.html) in the Amazon SES Developer Guide.

SendTemplatedEmail

Destination => Paws::SES::Destination
Source => Str
Template => Str
TemplateData => Str
[ConfigurationSetName => Str]
[ReplyToAddresses => ArrayRef[Str|Undef]]
[ReturnPath => Str]
[ReturnPathArn => Str]
[SourceArn => Str]
[Tags => ArrayRef[Paws::SES::MessageTag]]
[TemplateArn => Str]

Each argument is described in detail in: Paws::SES::SendTemplatedEmail

Returns: a Paws::SES::SendTemplatedEmailResponse instance

Composes an email message using an email template and immediately queues it for sending.

In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:

The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html) in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.
The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email.

For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-personalized-email-api.html) in the Amazon Simple Email Service Developer Guide.

SetActiveReceiptRuleSet

[RuleSetName => Str]

Each argument is described in detail in: Paws::SES::SetActiveReceiptRuleSet

Returns: a Paws::SES::SetActiveReceiptRuleSetResponse instance

Sets the specified receipt rule set as the active receipt rule set.

To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.

For information about managing receipt rule sets, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rule-sets.html).

You can execute this operation no more than once per second.

SetIdentityDkimEnabled

DkimEnabled => Bool
Identity => Str

Each argument is described in detail in: Paws::SES::SetIdentityDkimEnabled

Returns: a Paws::SES::SetIdentityDkimEnabledResponse instance

Enables or disables Easy DKIM signing of email sent from an identity. If Easy DKIM signing is enabled for a domain, then Amazon SES uses DKIM to sign all email that it sends from addresses on that domain. If Easy DKIM signing is enabled for an email address, then Amazon SES uses DKIM to sign all email it sends from that address.

For email addresses (for example, user@example.com), you can only enable DKIM signing if the corresponding domain (in this case, example.com) has been set up to use Easy DKIM.

You can enable DKIM signing for an identity at any time after you start the verification process for the identity, even if the verification process isn't complete.

You can execute this operation no more than once per second.

For more information about Easy DKIM signing, go to the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/easy-dkim.html).

SetIdentityFeedbackForwardingEnabled

ForwardingEnabled => Bool
Identity => Str

Each argument is described in detail in: Paws::SES::SetIdentityFeedbackForwardingEnabled

Returns: a Paws::SES::SetIdentityFeedbackForwardingEnabledResponse instance

Given an identity (an email address or a domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints.

Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS.

You can execute this operation no more than once per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/notifications.html).

SetIdentityHeadersInNotificationsEnabled

Enabled => Bool
Identity => Str
NotificationType => Str

Each argument is described in detail in: Paws::SES::SetIdentityHeadersInNotificationsEnabled

Returns: a Paws::SES::SetIdentityHeadersInNotificationsEnabledResponse instance

Given an identity (an email address or a domain), sets whether Amazon SES includes the original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified type.

You can execute this operation no more than once per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/notifications.html).

SetIdentityMailFromDomain

Identity => Str
[BehaviorOnMXFailure => Str]
[MailFromDomain => Str]

Each argument is described in detail in: Paws::SES::SetIdentityMailFromDomain

Returns: a Paws::SES::SetIdentityMailFromDomainResponse instance

Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain).

To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mail-from-set.html).

You can execute this operation no more than once per second.

SetIdentityNotificationTopic

Identity => Str
NotificationType => Str
[SnsTopic => Str]

Each argument is described in detail in: Paws::SES::SetIdentityNotificationTopic

Returns: a Paws::SES::SetIdentityNotificationTopicResponse instance

Sets an Amazon Simple Notification Service (Amazon SNS) topic to use when delivering notifications. When you use this operation, you specify a verified identity, such as an email address or domain. When you send an email that uses the chosen identity in the Source field, Amazon SES sends notifications to the topic you specified. You can send bounce, complaint, or delivery notifications (or any combination of the three) to the Amazon SNS topic that you specify.

You can execute this operation no more than once per second.

For more information about feedback notification, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/notifications.html).

SetReceiptRulePosition

RuleName => Str
RuleSetName => Str
[After => Str]

Each argument is described in detail in: Paws::SES::SetReceiptRulePosition

Returns: a Paws::SES::SetReceiptRulePositionResponse instance

Sets the position of the specified receipt rule in the receipt rule set.

For information about managing receipt rules, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rules.html).

You can execute this operation no more than once per second.

TestRenderTemplate

TemplateData => Str
TemplateName => Str

Each argument is described in detail in: Paws::SES::TestRenderTemplate

Returns: a Paws::SES::TestRenderTemplateResponse instance

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.

You can execute this operation no more than once per second.

UpdateAccountSendingEnabled

[Enabled => Bool]

Each argument is described in detail in: Paws::SES::UpdateAccountSendingEnabled

Returns: nothing

Enables or disables email sending across your entire Amazon SES account in the current AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given AWS Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds.

You can execute this operation no more than once per second.

UpdateConfigurationSetEventDestination

ConfigurationSetName => Str
EventDestination => Paws::SES::EventDestination

Each argument is described in detail in: Paws::SES::UpdateConfigurationSetEventDestination

Returns: a Paws::SES::UpdateConfigurationSetEventDestinationResponse instance

Updates the event destination of a configuration set. Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/monitor-sending-activity.html) in the Amazon SES Developer Guide.

When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).

You can execute this operation no more than once per second.

UpdateConfigurationSetReputationMetricsEnabled

ConfigurationSetName => Str
Enabled => Bool

Each argument is described in detail in: Paws::SES::UpdateConfigurationSetReputationMetricsEnabled

Returns: nothing

Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given AWS Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds.

You can execute this operation no more than once per second.

UpdateConfigurationSetSendingEnabled

ConfigurationSetName => Str
Enabled => Bool

Each argument is described in detail in: Paws::SES::UpdateConfigurationSetSendingEnabled

Returns: nothing

Enables or disables email sending for messages sent using a specific configuration set in a given AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds.

You can execute this operation no more than once per second.

UpdateConfigurationSetTrackingOptions

ConfigurationSetName => Str
TrackingOptions => Paws::SES::TrackingOptions

Each argument is described in detail in: Paws::SES::UpdateConfigurationSetTrackingOptions

Returns: a Paws::SES::UpdateConfigurationSetTrackingOptionsResponse instance

Modifies an association between a configuration set and a custom domain for open and click event tracking.

UpdateCustomVerificationEmailTemplate

TemplateName => Str
[FailureRedirectionURL => Str]
[FromEmailAddress => Str]
[SuccessRedirectionURL => Str]
[TemplateContent => Str]
[TemplateSubject => Str]

Each argument is described in detail in: Paws::SES::UpdateCustomVerificationEmailTemplate

Returns: nothing

Updates an existing custom verification email template.

You can execute this operation no more than once per second.

UpdateReceiptRule

Rule => Paws::SES::ReceiptRule
RuleSetName => Str

Each argument is described in detail in: Paws::SES::UpdateReceiptRule

Returns: a Paws::SES::UpdateReceiptRuleResponse instance

Updates a receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/receiving-email-managing-receipt-rules.html).

You can execute this operation no more than once per second.

UpdateTemplate

Template => Paws::SES::Template

Each argument is described in detail in: Paws::SES::UpdateTemplate

Returns: a Paws::SES::UpdateTemplateResponse instance

Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-personalized-email-api.html).

You can execute this operation no more than once per second.

VerifyDomainDkim

Domain => Str

Each argument is described in detail in: Paws::SES::VerifyDomainDkim

Returns: a Paws::SES::VerifyDomainDkimResponse instance

Returns a set of DKIM tokens for a domain identity.

When you execute the VerifyDomainDkim operation, the domain that you specify is added to the list of identities that are associated with your account. This is true even if you haven't already associated the domain with your account by using the VerifyDomainIdentity operation. However, you can't send email from the domain until you either successfully verify it (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-domains.html) or you successfully set up DKIM for it (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/easy-dkim.html).

You use the tokens that are generated by this operation to create CNAME records. When Amazon SES detects that you've added these records to the DNS configuration for a domain, you can start sending email from that domain. You can start sending email even if you haven't added the TXT record provided by the VerifyDomainIdentity operation to the DNS configuration for your domain. All email that you send from the domain is authenticated using DKIM.

To create the CNAME records for DKIM authentication, use the following values:

Name: token._domainkey.example.com
Type: CNAME
Value: token.dkim.amazonses.com

In the preceding example, replace token with one of the tokens that are generated when you execute this operation. Replace example.com with your domain. Repeat this process for each token that's generated by this operation.

You can execute this operation no more than once per second.

VerifyDomainIdentity

Domain => Str

Each argument is described in detail in: Paws::SES::VerifyDomainIdentity

Returns: a Paws::SES::VerifyDomainIdentityResponse instance

Adds a domain to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html) in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

VerifyEmailAddress

EmailAddress => Str

Each argument is described in detail in: Paws::SES::VerifyEmailAddress

Returns: nothing

Deprecated. Use the VerifyEmailIdentity operation to verify a new email address.

VerifyEmailIdentity

EmailAddress => Str

Each argument is described in detail in: Paws::SES::VerifyEmailIdentity

Returns: a Paws::SES::VerifyEmailIdentityResponse instance

Adds an email address to the list of identities for your Amazon SES account in the current AWS region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address.

You can execute this operation no more than once per second.

PAGINATORS

Paginator methods are helpers that repetively call methods that return partial results

ListAllConfigurationSets(sub { },[MaxItems => Int, NextToken => Str])

ListAllConfigurationSets([MaxItems => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

- ConfigurationSets, passing the object as the first parameter, and the string 'ConfigurationSets' as the second parameter

If not, it will return a a Paws::SES::ListConfigurationSetsResponse instance with all the params; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

ListAllCustomVerificationEmailTemplates(sub { },[MaxResults => Int, NextToken => Str])

ListAllCustomVerificationEmailTemplates([MaxResults => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

- CustomVerificationEmailTemplates, passing the object as the first parameter, and the string 'CustomVerificationEmailTemplates' as the second parameter

If not, it will return a a Paws::SES::ListCustomVerificationEmailTemplatesResponse instance with all the params; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

ListAllIdentities(sub { },[IdentityType => Str, MaxItems => Int, NextToken => Str])

ListAllIdentities([IdentityType => Str, MaxItems => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

- Identities, passing the object as the first parameter, and the string 'Identities' as the second parameter

If not, it will return a a Paws::SES::ListIdentitiesResponse instance with all the params; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

ListAllReceiptRuleSets(sub { },[NextToken => Str])

ListAllReceiptRuleSets([NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

- RuleSets, passing the object as the first parameter, and the string 'RuleSets' as the second parameter

If not, it will return a a Paws::SES::ListReceiptRuleSetsResponse instance with all the params; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

ListAllTemplates(sub { },[MaxItems => Int, NextToken => Str])

ListAllTemplates([MaxItems => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

- TemplatesMetadata, passing the object as the first parameter, and the string 'TemplatesMetadata' as the second parameter

If not, it will return a a Paws::SES::ListTemplatesResponse instance with all the params; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues

To install Paws, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Paws

CPAN shell

perl -MCPAN -e shell
install Paws

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)