/ 
Paws-0.31
River stage two • 9 direct dependents • 11 total dependents
/ Paws::SES

NAME

Paws::SES - Perl Interface to AWS Amazon Simple Email Service

SYNOPSIS

use Paws;

my $obj = Paws->service('SES');
my $res = $obj->Method(
  Arg1 => $val1,
  Arg2 => [ 'V1', 'V2' ],
  # if Arg3 is an object, the HashRef will be used as arguments to the constructor
  # of the arguments type
  Arg3 => { Att1 => 'Val1' },
  # if Arg4 is an array of objects, the HashRefs will be passed as arguments to
  # the constructor of the arguments type
  Arg4 => [ { Att1 => 'Val1'  }, { Att1 => 'Val2' } ],
);

DESCRIPTION

Amazon Simple Email Service

This is the API Reference for Amazon Simple Email Service (Amazon SES). This documentation is intended to be used in conjunction with the Amazon SES Developer Guide.

For a list of Amazon SES endpoints to use in service requests, see Regions and Amazon SES in the Amazon SES Developer Guide.

METHODS

CloneReceiptRuleSet(OriginalRuleSetName => Str, RuleSetName => Str)

Each argument is described in detail in: Paws::SES::CloneReceiptRuleSet

Returns: a Paws::SES::CloneReceiptRuleSetResponse instance

Creates a receipt rule set by cloning an existing one. All receipt
rules and configurations are copied to the new receipt rule set and are
completely independent of the source rule set.

For information about setting up rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

CreateConfigurationSet(ConfigurationSet => Paws::SES::ConfigurationSet)

Each argument is described in detail in: Paws::SES::CreateConfigurationSet

Returns: a Paws::SES::CreateConfigurationSetResponse instance

Creates a configuration set.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

CreateConfigurationSetEventDestination(ConfigurationSetName => Str, EventDestination => Paws::SES::EventDestination)

Each argument is described in detail in: Paws::SES::CreateConfigurationSetEventDestination

Returns: a Paws::SES::CreateConfigurationSetEventDestinationResponse instance

Creates a configuration set event destination.

When you create or update an event destination, you must provide one, and only one, destination. The destination can be either Amazon CloudWatch or Amazon Kinesis Firehose.

An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

CreateReceiptFilter(Filter => Paws::SES::ReceiptFilter)

Each argument is described in detail in: Paws::SES::CreateReceiptFilter

Returns: a Paws::SES::CreateReceiptFilterResponse instance

Creates a new IP address filter.

For information about setting up IP address filters, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

CreateReceiptRule(Rule => Paws::SES::ReceiptRule, RuleSetName => Str, [After => Str])

Each argument is described in detail in: Paws::SES::CreateReceiptRule

Returns: a Paws::SES::CreateReceiptRuleResponse instance

Creates a receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

CreateReceiptRuleSet(RuleSetName => Str)

Each argument is described in detail in: Paws::SES::CreateReceiptRuleSet

Returns: a Paws::SES::CreateReceiptRuleSetResponse instance

Creates an empty receipt rule set.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteConfigurationSet(ConfigurationSetName => Str)

Each argument is described in detail in: Paws::SES::DeleteConfigurationSet

Returns: a Paws::SES::DeleteConfigurationSetResponse instance

Deletes a configuration set.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteConfigurationSetEventDestination(ConfigurationSetName => Str, EventDestinationName => Str)

Each argument is described in detail in: Paws::SES::DeleteConfigurationSetEventDestination

Returns: a Paws::SES::DeleteConfigurationSetEventDestinationResponse instance

Deletes a configuration set event destination.

Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteIdentity(Identity => Str)

Each argument is described in detail in: Paws::SES::DeleteIdentity

Returns: a Paws::SES::DeleteIdentityResponse instance

Deletes the specified identity (an email address or a domain) from the
list of verified identities.

This action is throttled at one request per second.

DeleteIdentityPolicy(Identity => Str, PolicyName => Str)

Each argument is described in detail in: Paws::SES::DeleteIdentityPolicy

Returns: a Paws::SES::DeleteIdentityPolicyResponse instance

Deletes the specified sending authorization policy for the given
identity (an email address or a domain). This API returns successfully
even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteReceiptFilter(FilterName => Str)

Each argument is described in detail in: Paws::SES::DeleteReceiptFilter

Returns: a Paws::SES::DeleteReceiptFilterResponse instance

Deletes the specified IP address filter.

For information about managing IP address filters, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteReceiptRule(RuleName => Str, RuleSetName => Str)

Each argument is described in detail in: Paws::SES::DeleteReceiptRule

Returns: a Paws::SES::DeleteReceiptRuleResponse instance

Deletes the specified receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteReceiptRuleSet(RuleSetName => Str)

Each argument is described in detail in: Paws::SES::DeleteReceiptRuleSet

Returns: a Paws::SES::DeleteReceiptRuleSetResponse instance

Deletes the specified receipt rule set and all of the receipt rules it
contains.

The currently active rule set cannot be deleted.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DeleteVerifiedEmailAddress(EmailAddress => Str)

Each argument is described in detail in: Paws::SES::DeleteVerifiedEmailAddress

Returns: nothing

Deletes the specified email address from the list of verified
addresses.

The DeleteVerifiedEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The DeleteIdentity action is now preferred.

This action is throttled at one request per second.

DescribeActiveReceiptRuleSet()

Each argument is described in detail in: Paws::SES::DescribeActiveReceiptRuleSet

Returns: a Paws::SES::DescribeActiveReceiptRuleSetResponse instance

Returns the metadata and receipt rules for the receipt rule set that is
currently active.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DescribeConfigurationSet(ConfigurationSetName => Str, [ConfigurationSetAttributeNames => ArrayRef[Str|Undef]])

Each argument is described in detail in: Paws::SES::DescribeConfigurationSet

Returns: a Paws::SES::DescribeConfigurationSetResponse instance

Returns the details of the specified configuration set.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DescribeReceiptRule(RuleName => Str, RuleSetName => Str)

Each argument is described in detail in: Paws::SES::DescribeReceiptRule

Returns: a Paws::SES::DescribeReceiptRuleResponse instance

Returns the details of the specified receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

DescribeReceiptRuleSet(RuleSetName => Str)

Each argument is described in detail in: Paws::SES::DescribeReceiptRuleSet

Returns: a Paws::SES::DescribeReceiptRuleSetResponse instance

Returns the details of the specified receipt rule set.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

GetIdentityDkimAttributes(Identities => ArrayRef[Str|Undef])

Each argument is described in detail in: Paws::SES::GetIdentityDkimAttributes

Returns: a Paws::SES::GetIdentityDkimAttributesResponse instance

Returns the current status of Easy DKIM signing for an entity. For
domain name identities, this action also returns the DKIM tokens that
are required for Easy DKIM signing, and whether Amazon SES has
successfully verified that these tokens have been published.

This action takes a list of identities as input and returns the following information for each:

  • Whether Easy DKIM signing is enabled or disabled.

  • A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.

  • Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

This action is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

GetIdentityMailFromDomainAttributes(Identities => ArrayRef[Str|Undef])

Each argument is described in detail in: Paws::SES::GetIdentityMailFromDomainAttributes

Returns: a Paws::SES::GetIdentityMailFromDomainAttributesResponse instance

Returns the custom MAIL FROM attributes for a list of identities (email
addresses and/or domains).

This action is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

GetIdentityNotificationAttributes(Identities => ArrayRef[Str|Undef])

Each argument is described in detail in: Paws::SES::GetIdentityNotificationAttributes

Returns: a Paws::SES::GetIdentityNotificationAttributesResponse instance

Given a list of verified identities (email addresses and/or domains),
returns a structure describing identity notification attributes.

This action is throttled at one request per second and can only get notification attributes for up to 100 identities at a time.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

GetIdentityPolicies(Identity => Str, PolicyNames => ArrayRef[Str|Undef])

Each argument is described in detail in: Paws::SES::GetIdentityPolicies

Returns: a Paws::SES::GetIdentityPoliciesResponse instance

Returns the requested sending authorization policies for the given
identity (an email address or a domain). The policies are returned as a
map of policy names to policy contents. You can retrieve a maximum of
20 policies at a time.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

GetIdentityVerificationAttributes(Identities => ArrayRef[Str|Undef])

Each argument is described in detail in: Paws::SES::GetIdentityVerificationAttributes

Returns: a Paws::SES::GetIdentityVerificationAttributesResponse instance

Given a list of identities (email addresses and/or domains), returns
the verification status and (for domain identities) the verification
token for each identity.

This action is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

GetSendQuota( => )

Each argument is described in detail in: Paws::SES::GetSendQuota

Returns: a Paws::SES::GetSendQuotaResponse instance

Returns the user's current sending limits.

This action is throttled at one request per second.

GetSendStatistics( => )

Each argument is described in detail in: Paws::SES::GetSendStatistics

Returns: a Paws::SES::GetSendStatisticsResponse instance

Returns the user's sending statistics. The result is a list of data
points, representing the last two weeks of sending activity.

Each data point in the list contains statistics for a 15-minute interval.

This action is throttled at one request per second.

ListConfigurationSets([MaxItems => Int, NextToken => Str])

Each argument is described in detail in: Paws::SES::ListConfigurationSets

Returns: a Paws::SES::ListConfigurationSetsResponse instance

Lists the configuration sets associated with your AWS account.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second and can return up to 50 configuration sets at a time.

ListIdentities([IdentityType => Str, MaxItems => Int, NextToken => Str])

Each argument is described in detail in: Paws::SES::ListIdentities

Returns: a Paws::SES::ListIdentitiesResponse instance

Returns a list containing all of the identities (email addresses and
domains) for your AWS account, regardless of verification status.

This action is throttled at one request per second.

ListIdentityPolicies(Identity => Str)

Each argument is described in detail in: Paws::SES::ListIdentityPolicies

Returns: a Paws::SES::ListIdentityPoliciesResponse instance

Returns a list of sending authorization policies that are attached to
the given identity (an email address or a domain). This API returns
only a list. If you want the actual policy content, you can use
C<GetIdentityPolicies>.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

ListReceiptFilters()

Each argument is described in detail in: Paws::SES::ListReceiptFilters

Returns: a Paws::SES::ListReceiptFiltersResponse instance

Lists the IP address filters associated with your AWS account.

For information about managing IP address filters, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

ListReceiptRuleSets([NextToken => Str])

Each argument is described in detail in: Paws::SES::ListReceiptRuleSets

Returns: a Paws::SES::ListReceiptRuleSetsResponse instance

Lists the receipt rule sets that exist under your AWS account. If there
are additional receipt rule sets to be retrieved, you will receive a
C<NextToken> that you can provide to the next call to
C<ListReceiptRuleSets> to retrieve the additional entries.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

ListVerifiedEmailAddresses( => )

Each argument is described in detail in: Paws::SES::ListVerifiedEmailAddresses

Returns: a Paws::SES::ListVerifiedEmailAddressesResponse instance

Returns a list containing all of the email addresses that have been
verified.

The ListVerifiedEmailAddresses action is deprecated as of the May 15, 2012 release of Domain Verification. The ListIdentities action is now preferred.

This action is throttled at one request per second.

PutIdentityPolicy(Identity => Str, Policy => Str, PolicyName => Str)

Each argument is described in detail in: Paws::SES::PutIdentityPolicy

Returns: a Paws::SES::PutIdentityPolicyResponse instance

Adds or updates a sending authorization policy for the specified
identity (an email address or a domain).

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

ReorderReceiptRuleSet(RuleNames => ArrayRef[Str|Undef], RuleSetName => Str)

Each argument is described in detail in: Paws::SES::ReorderReceiptRuleSet

Returns: a Paws::SES::ReorderReceiptRuleSetResponse instance

Reorders the receipt rules within a receipt rule set.

All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

SendBounce(BouncedRecipientInfoList => ArrayRef[Paws::SES::BouncedRecipientInfo], BounceSender => Str, OriginalMessageId => Str, [BounceSenderArn => Str, Explanation => Str, MessageDsn => Paws::SES::MessageDsn])

Each argument is described in detail in: Paws::SES::SendBounce

Returns: a Paws::SES::SendBounceResponse instance

Generates and sends a bounce message to the sender of an email you
received through Amazon SES. You can only use this API on an email up
to 24 hours after you receive it.

You cannot use this API to send generic bounces for mail that was not received by Amazon SES.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

SendEmail(Destination => Paws::SES::Destination, Message => Paws::SES::Message, Source => Str, [ConfigurationSetName => Str, ReplyToAddresses => ArrayRef[Str|Undef], ReturnPath => Str, ReturnPathArn => Str, SourceArn => Str, Tags => ArrayRef[Paws::SES::MessageTag]])

Each argument is described in detail in: Paws::SES::SendEmail

Returns: a Paws::SES::SendEmailResponse instance

Composes an email message based on input data, and then immediately
queues the message for sending.

There are several important points to know about SendEmail:

  • You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.

  • The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.

  • Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.

  • For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.

SendRawEmail(RawMessage => Paws::SES::RawMessage, [ConfigurationSetName => Str, Destinations => ArrayRef[Str|Undef], FromArn => Str, ReturnPathArn => Str, Source => Str, SourceArn => Str, Tags => ArrayRef[Paws::SES::MessageTag]])

Each argument is described in detail in: Paws::SES::SendRawEmail

Returns: a Paws::SES::SendRawEmailResponse instance

Sends an email message, with header and content specified by the
client. The C<SendRawEmail> action is useful for sending multipart MIME
emails. The raw text of the message must comply with Internet email
standards; otherwise, the message cannot be sent.

There are several important points to know about SendRawEmail:

  • You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.

  • The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.

  • Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.

  • The To:, CC:, and BCC: headers in the raw message can contain a group list. Note that each recipient in a group list counts towards the 50-recipient limit.

  • Amazon SES overrides any Message-ID and Date headers you provide.

  • For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.

  • If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's "Source," "From," and "Return-Path" parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:

    • X-SES-SOURCE-ARN

    • X-SES-FROM-ARN

    • X-SES-RETURN-PATH-ARN

    Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email.

    For the most common sending authorization use case, we recommend that you specify the SourceIdentityArn and do not specify either the FromIdentityArn or ReturnPathIdentityArn. (The same note applies to the corresponding X-headers.) If you only specify the SourceIdentityArn, Amazon SES will simply set the "From" address and the "Return Path" address to the identity specified in SourceIdentityArn. For more information about sending authorization, see the Amazon SES Developer Guide.

SetActiveReceiptRuleSet([RuleSetName => Str])

Each argument is described in detail in: Paws::SES::SetActiveReceiptRuleSet

Returns: a Paws::SES::SetActiveReceiptRuleSetResponse instance

Sets the specified receipt rule set as the active receipt rule set.

To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

SetIdentityDkimEnabled(DkimEnabled => Bool, Identity => Str)

Each argument is described in detail in: Paws::SES::SetIdentityDkimEnabled

Returns: a Paws::SES::SetIdentityDkimEnabledResponse instance

Enables or disables Easy DKIM signing of email sent from an identity:

  • If Easy DKIM signing is enabled for a domain name identity (e.g., example.com), then Amazon SES will DKIM-sign all email sent by addresses under that domain name (e.g., user@example.com).

  • If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.

For email addresses (e.g., user@example.com), you can only enable Easy DKIM signing if the corresponding domain (e.g., example.com) has been set up for Easy DKIM using the AWS Console or the VerifyDomainDkim action.

This action is throttled at one request per second.

For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.

SetIdentityFeedbackForwardingEnabled(ForwardingEnabled => Bool, Identity => Str)

Each argument is described in detail in: Paws::SES::SetIdentityFeedbackForwardingEnabled

Returns: a Paws::SES::SetIdentityFeedbackForwardingEnabledResponse instance

Given an identity (an email address or a domain), enables or disables
whether Amazon SES forwards bounce and complaint notifications as
email. Feedback forwarding can only be disabled when Amazon Simple
Notification Service (Amazon SNS) topics are specified for both bounces
and complaints.

Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS.

This action is throttled at one request per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

SetIdentityHeadersInNotificationsEnabled(Enabled => Bool, Identity => Str, NotificationType => Str)

Each argument is described in detail in: Paws::SES::SetIdentityHeadersInNotificationsEnabled

Returns: a Paws::SES::SetIdentityHeadersInNotificationsEnabledResponse instance

Given an identity (an email address or a domain), sets whether Amazon
SES includes the original email headers in the Amazon Simple
Notification Service (Amazon SNS) notifications of a specified type.

This action is throttled at one request per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

SetIdentityMailFromDomain(Identity => Str, [BehaviorOnMXFailure => Str, MailFromDomain => Str])

Each argument is described in detail in: Paws::SES::SetIdentityMailFromDomain

Returns: a Paws::SES::SetIdentityMailFromDomainResponse instance

Enables or disables the custom MAIL FROM domain setup for a verified
identity (an email address or a domain).

To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

SetIdentityNotificationTopic(Identity => Str, NotificationType => Str, [SnsTopic => Str])

Each argument is described in detail in: Paws::SES::SetIdentityNotificationTopic

Returns: a Paws::SES::SetIdentityNotificationTopicResponse instance

Given an identity (an email address or a domain), sets the Amazon
Simple Notification Service (Amazon SNS) topic to which Amazon SES will
publish bounce, complaint, and/or delivery notifications for emails
sent with that identity as the C<Source>.

Unless feedback forwarding is enabled, you must specify Amazon SNS topics for bounce and complaint notifications. For more information, see SetIdentityFeedbackForwardingEnabled.

This action is throttled at one request per second.

For more information about feedback notification, see the Amazon SES Developer Guide.

SetReceiptRulePosition(RuleName => Str, RuleSetName => Str, [After => Str])

Each argument is described in detail in: Paws::SES::SetReceiptRulePosition

Returns: a Paws::SES::SetReceiptRulePositionResponse instance

Sets the position of the specified receipt rule in the receipt rule
set.

For information about managing receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

UpdateConfigurationSetEventDestination(ConfigurationSetName => Str, EventDestination => Paws::SES::EventDestination)

Each argument is described in detail in: Paws::SES::UpdateConfigurationSetEventDestination

Returns: a Paws::SES::UpdateConfigurationSetEventDestinationResponse instance

Updates the event destination of a configuration set.

When you create or update an event destination, you must provide one, and only one, destination. The destination can be either Amazon CloudWatch or Amazon Kinesis Firehose.

Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch or Amazon Kinesis Firehose. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

UpdateReceiptRule(Rule => Paws::SES::ReceiptRule, RuleSetName => Str)

Each argument is described in detail in: Paws::SES::UpdateReceiptRule

Returns: a Paws::SES::UpdateReceiptRuleResponse instance

Updates a receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

VerifyDomainDkim(Domain => Str)

Each argument is described in detail in: Paws::SES::VerifyDomainDkim

Returns: a Paws::SES::VerifyDomainDkimResponse instance

Returns a set of DKIM tokens for a domain. DKIM I<tokens> are character
strings that represent your domain's identity. Using these tokens, you
will need to create DNS CNAME records that point to DKIM public keys
hosted by Amazon SES. Amazon Web Services will eventually detect that
you have updated your DNS records; this detection process may take up
to 72 hours. Upon successful detection, Amazon SES will be able to
DKIM-sign email originating from that domain.

This action is throttled at one request per second.

To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled action.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

VerifyDomainIdentity(Domain => Str)

Each argument is described in detail in: Paws::SES::VerifyDomainIdentity

Returns: a Paws::SES::VerifyDomainIdentityResponse instance

Verifies a domain.

This action is throttled at one request per second.

VerifyEmailAddress(EmailAddress => Str)

Each argument is described in detail in: Paws::SES::VerifyEmailAddress

Returns: nothing

Verifies an email address. This action causes a confirmation email
message to be sent to the specified address.

The VerifyEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The VerifyEmailIdentity action is now preferred.

This action is throttled at one request per second.

VerifyEmailIdentity(EmailAddress => Str)

Each argument is described in detail in: Paws::SES::VerifyEmailIdentity

Returns: a Paws::SES::VerifyEmailIdentityResponse instance

Verifies an email address. This action causes a confirmation email
message to be sent to the specified address.

This action is throttled at one request per second.

PAGINATORS

Paginator methods are helpers that repetively call methods that return partial results

ListAllIdentities(sub { },[IdentityType => Str, MaxItems => Int, NextToken => Str])

ListAllIdentities([IdentityType => Str, MaxItems => Int, NextToken => Str])

If passed a sub as first parameter, it will call the sub for each element found in :

- Identities, passing the object as the first parameter, and the string 'Identities' as the second parameter

If not, it will return a a Paws::SES::ListIdentitiesResponse instance with all the params; from all the responses. Please take into account that this mode can potentially consume vasts ammounts of memory.

SEE ALSO

This service class forms part of Paws

BUGS and CONTRIBUTIONS

The source code is located here: https://github.com/pplu/aws-sdk-perl

Please report bugs to: https://github.com/pplu/aws-sdk-perl/issues