1.000139  2022-12-13 11:49:03-08:00 America/Los_Angeles
    - Add 'COMMON' config options for shared slots
    - Add options for default j and x values in shared slots
1.000138  2022-12-06 06:52:55-08:00 America/Los_Angeles
    - Fix resources output for shared slots
    - Make slots a range, not a single value
1.000137  2022-12-05 13:15:45-08:00 America/Los_Angeles
    - Rework shared slots logic
1.000136  2022-11-29 13:56:37-08:00 America/Los_Angeles
    - Add ability to sort resource plugins to get them in order.
1.000135  2022-11-29 10:44:53-08:00 America/Los_Angeles
    - Add ability to specify a umask for shared slots files
1.000134  2022-11-29 10:03:09-08:00 America/Los_Angeles
    - Add ability to assign multiple slots to jobs
    - Add shared job slots
1.000133  2022-09-07 13:44:03-07:00 America/Los_Angeles
    - Order tests with conflicts earlier than others
1.000132  2022-09-07 09:42:06-07:00 America/Los_Angeles
    - Further improve resource command and file
1.000131  2022-09-06 15:53:55-07:00 America/Los_Angeles
    - Use relative file paths for job slot display
1.000130  2022-09-06 14:39:43-07:00 America/Los_Angeles
    - Better resource display
    - Fix #255 (.test_info.json being left behind)
    - Fix issue where not all resources will be loaded by resource command
1.000129  2022-09-06 11:20:38-07:00 America/Los_Angeles
    - Fix issue with job slots sometimes being doubled when tests are skipped
1.000128  2022-09-02 13:01:09-07:00 America/Los_Angeles
    - Fix issue where yath might exit before all output is rendered
    - Add scheduler process
    - Fix --color flag (Thanks James Raspass, #246)
    - Fix spelling mistakes (Thanks bernhard, #249)
1.000127  2022-08-31 08:32:44-07:00 America/Los_Angeles
    - Remove unnecessary Carp::Always
1.000126  2022-08-30 11:09:19-07:00 America/Los_Angeles
    - Add 'yath resources' command to view resource usage
1.000125  2022-07-08 15:50:11-07:00 America/Los_Angeles
    - Change -jN to use a resource class instead of hard-coding it into State.pm
    - Fix bug in how a POSIX function is called
1.000124  2022-04-08 12:26:14-07:00 America/Los_Angeles
    - Fix bug where see `yath status` was being shown for non-persistent runs
    - Make 'busy' message shorter so it is less likely to be truncated
1.000123  2022-04-06 13:34:10-07:00 America/Los_Angeles
    - Fix bug where spawns would not run if queued before stages were ready
1.000122  2022-04-06 11:04:43-07:00 America/Los_Angeles
    - Fix another id vs uuid typo
1.000121  2022-04-06 10:46:35-07:00 America/Los_Angeles
    - Fix bug introduced by my last fix... oops
1.000120  2022-04-06 10:17:48-07:00 America/Los_Angeles
    - Fix bug where a stage reload would re-run all previously requested spawns
1.000119  2022-04-05 10:58:59-07:00 America/Los_Angeles
    - Allow per-test args to be specified at the command line
1.000118  2022-04-05 09:39:40-07:00 America/Los_Angeles
    - Do not show broken reload files multiple times
1.000117  2022-04-04 16:09:58-07:00 America/Los_Angeles
    - Check for reload errors before allowing a `yath run` to work
1.000116  2022-04-01 15:29:40-07:00 America/Los_Angeles
    - Better handling of version mismatches in the persistent runner
    - Better info when a `run` command is waiting on a busy runner
1.000115  2022-03-31 10:28:14-07:00 America/Los_Angeles
    - Fix reload bug when using restricted reload
    - Fix bug where inotify would only report changes once
1.000114  2022-03-24 09:27:03-07:00 America/Los_Angeles
    - Fix bug when inotify is not installed
    - Make yath better at detecting when 2 files are the same
1.000113  2022-03-23 09:36:57-07:00 America/Los_Angeles
    - Refactor preloader into preloader and reloader
    - Honor churn blocks during relead events even if --reload is disabled
1.000112  2022-03-15 14:21:29-07:00 America/Los_Angeles
    - Add --rerun and --rerun-failed options to test/run command
    - Add lastlog.jsonl.* symlink creation to auto-link to the last log produced
1.000111  2022-03-09 15:07:10-08:00 America/Los_Angeles
    - Better handling and checking of persistence files
1.000110  2022-02-24 11:50:52-08:00 America/Los_Angeles
    - Add 'tick()' method to resource classes
1.000109  2022-02-22 12:07:11-08:00 America/Los_Angeles
    - Do not initialize resources in `yath run`
    - Add command to settings->harness
    - Add from_runner to settings included from a persistent runner
    - Fix temp dir issue in macos
1.000108  2022-02-11 15:23:10-08:00 America/Los_Angeles
    - Add ability for resource managers to report resources as unavailable ot skip tests
    - Add setup method for resource managers
1.000107  2022-02-10 08:49:19-08:00 America/Los_Angeles
    - Clean up FIFO in interactive mode with a persistent runner
1.000106  2022-02-08 10:10:38-08:00 America/Los_Angeles
    - Fix uninitialized warning
1.000105  2022-02-08 09:52:32-08:00 America/Los_Angeles
    - Make changes_diff work with or without prefixes in the filenames
1.000104  2022-02-04 11:00:29-08:00 America/Los_Angeles
    - Add settings ot paremeter list for coverage managers
1.000103  2022-02-04 10:20:32-08:00 America/Los_Angeles
    - Add options to for whitespace and non-subs in change data
        --changes-include-whitespace - Include whitespace lines for change data
        --changes-exclude-nonsub     - Do not include non-sub changes in perl files
        --changes-exclude-opens      - Do not include tests that only open() changed files
        --changes-exclude-loads      - Do not include tests that only load changed files without running subs
1.000102  2022-02-03 15:28:54-08:00 America/Los_Angeles
    - Remove warning that can trigger in valid (not warn-worthy) cases.
1.000101  2022-02-02 13:26:35-08:00 America/Los_Angeles
    - Fix 'replay' output of subtests
1.000100  2022-02-01 09:49:52-08:00 America/Los_Angeles
    - Mark reload_syntax_error.t as AUTHOR_TESTING only (#243)
    - Add threshold for duration data fetching, this saves time when duration data is large
1.000099  2022-01-27 10:20:38-08:00 America/Los_Angeles
    - Add options to exclude some chnaged files when running coverage tests
1.000098  2022-01-27 09:36:24-08:00 America/Los_Angeles
    - Fix bugs in 'failed' command after adding subtests
1.000097  2022-01-27 08:31:46-08:00 America/Los_Angeles
    - Show subtest failures in 'failed' command
1.000096  2022-01-26 14:42:43-08:00 America/Los_Angeles
    - Show failed subtests in final summary
    - Fix bug where env vars get removed when we preload Test2::API too early (#241)
    - Fix bug where replay with test filename has uninitialized warnings (#242)
1.000095  2022-01-07 14:35:25-08:00 America/Los_Angeles
    - Fix bug where syntax errors prevented reloading of effected files
1.000094  2022-01-05 13:51:40-08:00 America/Los_Angeles
    - Fix logic so that tests for changed files are only added when requested
    - Pass all changes to the coverage managers
1.000093  2021-12-16 15:19:47-08:00 America/Los_Angeles
    - Split out 'get_coverage_tests' logic for reuse
1.000092  2021-12-16 10:39:37-08:00 America/Los_Angeles
    - Add plugin hook for post-processing of coverage data.
1.000091  2021-12-15 12:09:09-08:00 America/Los_Angeles
    - Add more reload capabilities (non-perl reloading, callbacks)
1.000090  2021-12-14 12:43:11-08:00 America/Los_Angeles
    - Fix bug in status command when only 1 run is present
1.000089  2021-12-14 12:12:05-08:00 America/Los_Angeles
    - Add several commands for managing persisten runners
        - yath kill     - Kill the runner and all tests (stop NOW)
        - yath ps       - Show running yath process list
        - yath status   - Show processes and health status
        - yath abort    - Cancel any running or queued test, but do not kill runner
    - Control+C in `yath run` does a better job of cleaning up
1.000088  2021-12-13 11:29:24-08:00 America/Los_Angeles
    - Skip tests that do not exists when running coverage tests
1.000087  2021-12-09 13:51:59-08:00 America/Los_Angeles
    - Add --procname-prefix option to add custom strings to procnames
1.000086  2021-12-07 13:40:40-08:00 America/Los_Angeles
    - Add 'HARNESS-CHURN-XXX' directive support
1.000085  2021-12-06 16:28:51-08:00 America/Los_Angeles
    - Make 'do' actually work
1.000084  2021-12-06 15:59:23-08:00 America/Los_Angeles
    - Add 'do' command that has the magic of picking run or test as needed
1.000083  2021-12-03 10:18:27-08:00 America/Los_Angeles
    - Add options for controlling runner output, specially for `yath run`
1.000082  2021-11-18 09:04:17-08:00 America/Los_Angeles
    - Make collector options configurable
    - Add collector option for max poll events
    - Add collector option for max open jobs
    - Turn warnings about too many open files into proper events
1.000081  2021-11-15 13:27:48-08:00 America/Los_Angeles
    - Retry opening files later when "too many files open" errors occur
1.000080  2021-11-04 11:13:07-07:00 America/Los_Angeles
    - Add sort_files_2 for plugins to add settings and future-proof it
1.000079  2021-10-29 10:42:39-07:00 America/Los_Angeles
    - smarter reloader, bit via callbacks, not assumptions
1.000078  2021-10-28 15:38:10-07:00 America/Los_Angeles
    - Disable the feature from the last commit, it needs rethinking thanks to
      things like Moose.
1.000077  2021-10-28 15:14:09-07:00 America/Los_Angeles
    - Make reloader smarter, do not delete subs from other files when reloading a file
1.000076  2021-10-22 10:29:22-07:00 America/Los_Angeles
    - Add relative filename to the queued task
1.000075  2021-10-21 14:05:27-07:00 America/Los_Angeles
    - Fix missing Changes entry for last release
1.000074  2021-10-20 09:58:05-07:00 America/Los_Angeles
    - Better coverage aggregation and plugin capabilities
1.000073  2021-09-21 10:25:42-07:00 America/Los_Angeles
    - Load coverage module EARLY in the runner spawn process
    - Add ability to for plugins to inject CLI options for the runner
1.000072  2021-09-13 09:29:54-07:00 America/Los_Angeles
    - Wrap fifo creation in a loop for interrupted system calls
1.000071  2021-09-03 08:26:04-07:00 America/Los_Angeles
    - Allow custom subclasses with cover plugin
1.000070  2021-09-01 13:36:50-07:00 America/Los_Angeles
    - Improve reload inotify logic
1.000069  2021-08-31 14:07:54-07:00 America/Los_Angeles
    - Add interactive mode!
1.000068  2021-08-30 09:52:12-07:00 America/Los_Angeles
    - Expand --cover-dir options with glob()
1.000067  2021-08-27 11:32:10-07:00 America/Los_Angeles
    - Add option to only reload repo directories
1.000066  2021-08-12 13:48:06-07:00 America/Los_Angeles
    - Fix 'Cover' plugin to record untested perl files
1.000065  2021-08-04 15:11:59-07:00 America/Los_Angeles
    - Fix 'Cover' plugin bugs and edge cases
1.000064  2021-08-02 15:23:04-07:00 America/Los_Angeles
    - Add more capabilities for plugins
    - Add the 'Cover' plugin to handle coverage in a better way
1.000063  2021-07-14 09:44:17-07:00 America/Los_Angeles
    - Add diags/notes to notification problem-capture
1.000062  2021-07-07 15:34:34-07:00 America/Los_Angeles
    - Add info on where/why 'claim_file' was called
1.000061  2021-07-07 12:53:11-07:00 America/Los_Angeles
    - Add even more support for notification plugins
1.000060  2021-07-06 09:51:45-07:00 America/Los_Angeles
    - Add support for html email
1.000059  2021-07-01 13:56:29-07:00 America/Los_Angeles
    - Add support for custom email/slack text
1.000058  2021-06-15 15:38:16-07:00 America/Los_Angeles
    - Add support for new yathui direct db coverage/duration plugin
    - Add option to disable bail-out abortion
1.000057  2021-06-04 15:59:24-07:00 America/Los_Angeles
    - Add ability to provide a diff for changed files
    - Add ability to filter files with changes
1.000056  2021-05-24 14:26:45-07:00 America/Los_Angeles
    - Fix warnings from preloader
1.000055  2021-05-18 13:05:20-07:00 America/Los_Angeles
    - Run 'conficting' tests sooner
1.000054  2021-05-04 08:58:25-07:00 America/Los_Angeles
    - Add option to dump depmaps
1.000053  2021-04-30 11:22:30-07:00 America/Los_Angeles
    - Be smarter about what can or cannot be reloaded in 'reload' mode
1.000052  2021-04-30 10:37:56-07:00 America/Los_Angeles
    - Add --reload option to 'start' command to reload moduels in-place when possible
    - Make Test2::Plugin::Cover optional again
1.000051  2021-04-29 07:40:33-07:00 America/Los_Angeles
    - Fix an edge-case warning from git plugin
1.000050  2021-04-27 09:22:25-07:00 America/Los_Angeles
    - Allow a default coverage manager to be provided
    - Move Test2::Require::Module to dev requirements
    - Update some modules from 'base' to 'parent'
1.000049  2021-04-26 08:08:05-07:00 America/Los_Angeles
    - Fully require Test2::Plugin::Cover at a sufficient version
1.000048  2021-04-23 11:54:37-07:00 America/Los_Angeles
    - Require updated Test2::Plugin::Cover
    - Better coverage handling, sync with newer Test2::Plguin::Cover
1.000047  2021-04-20 11:42:49-07:00 America/Los_Angeles
    - Remove some coverage data that was nto intended to be present (false data)
1.000046  2021-04-20 09:25:24-07:00 America/Los_Angeles
    - Remove debugging print statement
1.000045  2021-04-20 09:14:01-07:00 America/Los_Angeles
    - Change how coverage and changed-files data works
1.000044  2021-03-11 20:08:54-08:00 America/Los_Angeles
    - Add plugin support for providing coverage/duration data
    - Fix running t/integration tests with ./ in path (#215)
    - Add a fixme/todo test for #216 (Tap subtest parsing)
1.000043  2021-03-05 07:47:04-08:00 America/Los_Angeles
    - Minor documentation correction
    - Add 'signal()' method to Renderer base class
1.000042  2020-11-17 22:44:35-08:00 America/Los_Angeles
    - Fix pipe size setting to actually use the value we want
    - Fix pipe size setting code for older perls
1.000041  2020-11-17 22:28:55-08:00 America/Los_Angeles
    - When possible use a larger pipe buffer
1.000040  2020-11-17 21:59:41-08:00 America/Los_Angeles
    - Fix bug in collector that made it marginally less efficient
    - Fix bug that prevented no-max from working in JobDir poll
    - Fix bug that prevented the active status display from updating
1.000039  2020-11-17 19:54:08-08:00 America/Los_Angeles
    - yath watch shows aux output
    - Minor no-op code improvement in Runner.pm
1.000038  2020-11-02 20:49:12-08:00 America/Los_Angeles
    - Add shellcall and aux output capture for plugins
1.000037  2020-11-02 14:31:10-08:00 America/Los_Angeles
    - Fix conflict between process management and resource management
1.000036  2020-11-01 20:34:19-08:00 America/Los_Angeles
    - Add initializing status line
1.000035  2020-10-29 15:00:33-07:00 America/Los_Angeles
    - Add glob() and relgob() .yath.rc pseudo-functions
    - Document rel() .yath.rc pseudo-function
1.000034  2020-10-29 07:51:19-07:00 America/Los_Angeles
    - Fix warning when output is not a terminal
1.000033  2020-10-28 16:37:19-07:00 America/Los_Angeles
    - Better status line while tests are running
    - Do not use --START-- and --END-- on long single-lines
1.000032  2020-10-23 11:59:34-07:00 America/Los_Angeles
    - Make it possible to run an alternate file to the one specified
1.000031  2020-10-22 11:27:59-07:00 America/Los_Angeles
    - Fix incorrect return from $spawn->args
1.000030  2020-10-21 19:34:45-07:00 America/Los_Angeles
    - Add environment variable management to spawn command
    - Move spawn logic to overridable methods
1.000029  2020-10-15 13:57:36-07:00 America/Los_Angeles
    - Add 'spawn' command
    - Fix plan in test.pl
1.000028  2020-09-25 08:43:43-07:00 America/Los_Angeles
    - Fix issue where args after :: were ignored (#195)
1.000027  2020-09-21 11:46:43-07:00 America/Los_Angeles
    - Move dbi_profile and cover_Files to run
1.000026  2020-09-08 13:37:50-07:00 America/Los_Angeles
    - Make nytprof work in persistent mode
1.000025  2020-09-08 11:29:07-07:00 America/Los_Angeles
    - Fix edge case where STDIN was opened for writing
    - Add basic support for nytprof
1.000024  2020-08-24 09:06:43-07:00 America/Los_Angeles
    - Add Test2::Harness::Runner::Resource for resource management
1.000023  2020-08-14 21:18:29-07:00 America/Los_Angeles
    - No changes since trial
1.000022  2020-08-13 15:18:07-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Make failure to chmod things non-fatal to fix bsd testing
    - Fix spelling issues
    - Make chmod stuff more correct
1.000021  2020-08-04 21:03:28-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Add changed_files plugin hook
    - Make git plugin support changed_files hook
    - Add Test2::Harness::Log docs
    - Add 'cover-files' option using Test2::Plugin::Cover
    - Add coverage aggregator tool
    - Add ability to run tests that cover changed files
    - Add dbi-profiling option
    - Fix permissions on temp dirs (may still have some issues)
1.000020  2020-07-08 22:25:23-07:00 America/Los_Angeles
    - reduce version of Data::UUID required
    - Allow filenames in replay
    - Add 'cover_files' shortcut for Test2::Plugin::Cover
1.000019  2020-05-30 11:07:09-07:00 America/Los_Angeles
    - Typo Fix in error message
    - Do not die on 0 failures
1.000018  2020-04-13 13:35:34-07:00 America/Los_Angeles
    - Stop leaving leftover files in /tmp
1.000017  2020-04-07 15:47:42-07:00 America/Los_Angeles
    - Fix log_dir test on macos
1.000016  2020-04-07 15:14:00-07:00 America/Los_Angeles
    - Fix #! in yath script
    - Fix 'DEFAULT' and 'IGNORE' signal inheritence
    - Fix log-dir specificiation (#174)
1.000015  2020-03-23 11:49:38-07:00 America/Los_Angeles
    - YathUI plugin improvements (show url, show errors)
    - Add more compression options to open_file
1.000014  2020-03-21 18:20:37-07:00 America/Los_Angeles
    - Add YathUI plugin
    - Fix maybe_durations option
1.000013  2020-03-18 13:16:20-07:00 America/Los_Angeles
    - Minor doc change
1.000012  2020-03-18 13:09:14-07:00 America/Los_Angeles
    - Fix #172 qvf+verbose
    - Fix #169 log path in 'run' command
    - Fix #168 - :: mistaken for command name
    - Fix #171 summary should only be shown when applicable
    - Fix #171 Add --brief option to 'failed' command
1.000011  2020-03-09 09:12:25-07:00 America/Los_Angeles
    - Fix notifications so that all failed tests are shown
1.000010  2020-03-08 15:15:24-07:00 America/Los_Angeles
    - Fix missing Launch in verbose mode
    - Restore HARNESS_IS_VERBOSE env variable
    - Fix #163 where 1 concurrent job would get stuck reducing concurrency
1.000009  2020-03-06 14:05:23-08:00 America/Los_Angeles
    - Add HARNESS-NO-RETRY
1.000008  2020-03-06 08:17:29-08:00 America/Los_Angeles
    - Add --exclude-list option
1.000007  2020-03-05 13:55:01-08:00 America/Los_Angeles
    - Fix __FILE__ value in 'projects' command
1.000006  2020-03-03 15:32:49-08:00 America/Los_Angeles
    - Provide methods in TestFile that let you get/set retry
1.000005  2020-03-02 14:48:40-08:00 America/Los_Angeles
    - Use --qvf in test.pl for better output
    - Use -r1 in test.pl temporarily for some cpantesters
1.000004  2020-03-02 10:05:10-08:00 America/Los_Angeles
    - Switch away from sys-io in Util::File::Stream
    - Properly wrap FLOCK to handle interrupted syscalls
    - Remove unnecessary IPC::Open3 dep
    - Remove unnecessary Module::Pluggable dep
    - Add missing require statement
1.000003  2020-03-01 21:50:08-08:00 America/Los_Angeles
    - Do not run persistent tests in AUTOMATED_TESTING
1.000002  2020-03-01 21:19:04-08:00 America/Los_Angeles
    - Fix integration tests IO issues
1.000001  2020-02-29 10:49:11-08:00 America/Los_Angeles
    - Do not run tests on broken NJH smokers
1.000000  2020-02-28 09:30:47-08:00 America/Los_Angeles
    - No changes since last trial release
    - This is the first stable release
    - Huge changes/refactor from the alpha versions
0.999010  2020-02-27 21:52:25-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Make signals.t author-testing
    - Cleanup failure-test
    - Show timeout delta when timing out a test
0.999009  2020-02-27 07:27:29-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix sorting in ordering tests
    - Fix incorrect line numbers in plugin.t errors
    - Less fragile fork check in Makefile.PL
0.999008  2020-02-26 20:25:34-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Only officially support systems with true fork().
0.999007  2020-02-26 16:52:46-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix IOStream permissions issues
0.999006  2020-02-26 15:39:28-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Do not use IOEvents by default
0.999005  2020-02-25 14:02:01-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Remove blib from tarball
    - Fix tests when outdated plugins are present
0.999004  2020-02-25 07:48:30-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Warn+Skip when auto-loading outdated plugins
0.999003  2020-02-24 14:51:18-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix older perls (down to 5.10)
0.999002  2020-02-24 08:56:06-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix installation when an old yath is installed
0.999001  2020-02-23 15:42:47-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Attempt to fix includes integration test
0.999000  2020-02-23 10:19:36-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Huge refactor
    - Fix signal restoration for forked tests
0.001099  2019-09-09 21:12:15-07:00 America/Los_Angeles
    - Add --durations and --maybe_durations options
0.001098  2019-09-09 13:35:22-07:00 America/Los_Angeles
    - Add current dir to run data
    - Add rel/abs paths to harness_job_start/end
0.001097  2019-09-08 19:22:56-07:00 America/Los_Angeles
    - Add speedtag command
0.001096  2019-09-08 15:24:00-07:00 America/Los_Angeles
    - Cleanup help options a bit
    - Split category into category and duration
    - Clean up the ProcMan module
    - Tests start as their own process groups
0.001095  2019-09-04 15:38:07-07:00 America/Los_Angeles
    - Fix logging of plugin when it is blessed
0.001094  2019-09-04 14:44:55-07:00 America/Los_Angeles
    - Improve+Test SysInfo and Git Plugins
0.001093  2019-09-03 13:23:04-07:00 America/Los_Angeles
    - Add branch info to git data
0.001092  2019-09-03 10:32:46-07:00 America/Los_Angeles
    - Minor tweaks to SysInfo and Git plugins
0.001091  2019-08-30 14:03:19-07:00 America/Los_Angeles
    - Add Yath::Plugin::SysInfo
0.001090  2019-08-30 10:22:23-07:00 America/Los_Angeles
    - Allow specifying run-fields as JSON
0.001089  2019-08-30 09:05:59-07:00 America/Los_Angeles
    - Allow listing run-fields on the command line
0.001088  2019-08-29 23:23:47-07:00 America/Los_Angeles
    - Abstract and correct timing data collection
0.001087  2019-08-29 12:54:23-07:00 America/Los_Angeles
    - Fix incorrect timestamps
0.001086  2019-08-28 14:19:57-07:00 America/Los_Angeles
    - Fix overall harness run time where HiRes was only used for start time,
      not end time (sometimes resulting in a negative run time being printed)
    - Do not use Test2::Plugin::Times
    - Use event based timing data for -T
    - remove --times flag
    - Support for non-perl tests
0.001085  2019-08-21 16:49:20-07:00 America/Los_Angeles
    - Do not require DBIProfile yet until we need it (#111)
    - Standardize how fields are specified
0.001084  2019-08-16 20:08:48-07:00 America/Los_Angeles
    - Make More information available to plugins
0.001083  2019-08-16 19:55:17-07:00 America/Los_Angeles
    - Split out some plugins (DBIProfile, MemUsage, UUID)
    - No special treatment for plugins, they need to use INFO facets
0.001082  2019-08-15 11:03:22-07:00 America/Los_Angeles
    - Support 'END' phase in calculating times
    - Support super verbose mode in composer
    - Improvement ot DBIProfile
    - New minimum Test2 version
0.001081  2019-08-13 13:49:32-07:00 America/Los_Angeles
    - Add Git injection plugin
    - Add DBI Profile plugin
    - Calculate and record timing data
0.001080  2019-07-24 09:56:41-07:00 America/Los_Angeles
    - Make it possible to relocate the persistence file
0.001079  2019-07-05 12:56:06-07:00 America/Los_Angeles
    - Work around JSON::XS Bug
0.001078  2019-07-02 08:46:49-07:00 America/Los_Angeles
    - Document yath log format
0.001077  2019-06-06 15:04:32-07:00 America/Los_Angeles
    - Add --retry options (toddr)
    - Make sure all events are flushed if there is a sync issue
    - Added some tests
0.001076  2019-05-20 14:54:50-07:00 America/Los_Angeles
    - Fix TAP parsers nesting parsing
    - Dix comment groupign when parsing TAP
0.001075  2019-05-18 18:33:52-07:00 America/Los_Angeles
    - Fix Stream+IPC issues
0.001074  2019-05-07 12:04:51-07:00 America/Los_Angeles
    - Add support for table structures
0.001073  2019-04-10 08:21:04-07:00 America/Los_Angeles
    - Add support for disabled progress indicators to QVF mode
0.001072  2019-04-08 10:27:50-07:00 America/Los_Angeles
    - Add option to turn off progress indicators
0.001071  2018-12-13 09:43:38-08:00 America/Los_Angeles
    - Add --notify-text CLI option
    - Fix exit code parsing and reporting
0.001070  2018-10-24 13:19:53-07:00 America/Los_Angeles
    - Allow --author-testing in 'projects' command
    - Misc minor changes
0.001069  2018-08-23 13:48:54-07:00 America/Los_Angeles
    - Fix busy-spin in job reaper
    - Allow --no-fork and --no-preload simultaneously
0.001068  2018-07-27 09:12:45-07:00 America/Los_Angeles
    - Fix more encoding/utf8 bugs
    - Fix missing dep on sufficient List::Utils version
0.001067  2018-07-18 07:42:06-07:00 America/Los_Angeles
    - Add ability to congiure a custom log file format
0.001066  2018-07-12 08:06:46-07:00 America/Los_Angeles
    - Fix issue where isolation jobs were being kicked off too early. It needs to wait for all non-isolation jobs to finish first.
    - New Feature: # HARNESS-CONFLICTS-XXX
    - New documentation for HARNESS-CATEGORY-IMMISCIBLE
    - New documentation for HARNESS-TIMEOUT-EVENT
    - Get rid of the use of each when walking a hash.
    - Allow comment only lines prior to HARNESS-XXX directives
    - Accept binary TAP output that is not correctly formatted to UTF8
    - Honor multiple spaces (or -) as a delimiter for # HARNESS directives
0.001065  2018-04-22 03:26:57-07:00 America/Los_Angeles
    - Fix utf8 double encoding error
0.001064  2018-03-29 22:47:10-07:00 America/Los_Angeles
    - Make it possible to chdir for a given test
    - Make run automatically chdir to the dir you were in when queuing tests
    - Add 'projects' command to run a dir with multiple projects
0.001063  2018-03-27 10:17:02-07:00 America/Los_Angeles
    - Make it possible to use relative paths in yath.rc
0.001062  2018-03-19 09:22:18-07:00 America/Los_Angeles
    - Fix bug where $, and $\ would break the formatters
0.001061  2018-03-14 12:47:28-07:00 America/Los_Angeles
    - No Changes since last trial
0.001060  2018-03-13 11:11:27-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix parsing of streaming subtests
0.001059  2018-03-12 13:26:43-07:00 America/Los_Angeles
    - Job id's are now uuid's. Numbers for humans are now names
    - Use UUIDs for event IDs
    - Update min Test2 version
0.001058  2018-03-11 15:29:23-07:00 America/Los_Angeles
    - Fix broken tests
    - Record times by default, but only show when requested
    - Add memory usage
    - Do not add times from the harness itself
    - Add UUIDs to everything
0.001057  2018-03-07 08:09:18-08:00 America/Los_Angeles
    - No changes from last trial
0.001056  2018-03-06 13:47:08-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Account for the 'hub' facet
0.001055  2018-03-05 20:10:24-08:00 America/Los_Angeles
    - Fix error where multiple procs read the same fh at once
0.001054  2018-03-02 09:05:44-08:00 America/Los_Angeles
    - Switch Streaming write() to use syswrite
    - Fix bug where jobs would re-run after a reload
0.001053  2018-02-27 07:15:53-08:00 America/Los_Angeles
    - No changes since last trial
0.001052  2018-02-06 15:03:08-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix infinite recursion in closed subtests log json
0.001051  2018-02-06 13:29:38-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Extract composer logic from Test2 formatter so it can be re-used
    - Revamp Watcher to stop mangling events
    - Onlt log processed events now by default (since mangling has stopped)
0.001050  2018-02-01 13:31:58-08:00 America/Los_Angeles
    - Allow logging of both processed and unprocessed events
    - Add finish() hook to loggers
    - This is a breaking change for any existing loggers (still alpha! Do not complain!)
0.001049  2018-01-26 14:27:16-08:00 America/Los_Angeles
    - Better 'renderer' handling
0.001048  2018-01-23 10:42:16-08:00 America/Los_Angeles
    - Make it possible to use multiple renderers at once
    - Fix return via next issue
0.001047  2018-01-19 21:58:13-08:00 America/Los_Angeles
    - Fix auto-reload for preload mode
0.001046  2018-01-18 10:47:31-08:00 America/Los_Angeles
    - Make --qvf show INTERNAL messages (#51)
    - Make -v override --qvf (#50)
    - Do not show 'no_display' about messages (#44)
0.001045  2018-01-05 08:38:05-08:00 America/Los_Angeles
    - Make it possible to toggle --qvf off
    - Show files being run in --qvf mode
0.001044  2018-01-02 07:25:06-08:00 America/Los_Angeles
    - Add post-run hook to plugins
    - Add -V/--version flags
0.001043  2017-12-19 10:12:22-08:00 America/Los_Angeles
    - Remove test for deleted file
0.001042  2017-12-18 15:03:26-08:00 America/Los_Angeles
    - Better scheduling simplification
0.001041  2017-12-06 11:01:16-08:00 America/Los_Angeles
    - Make realtime slack/email of failures possible
    - Add QVF (Quiet but verbose on failure) formatter
0.001040  2017-12-04 23:20:35-08:00 America/Los_Angeles
    - Fix filehandle IPC leak issue
0.001039  2017-12-04 21:54:24-08:00 America/Los_Angeles
    - Simplify scheduling
0.001038  2017-11-30 10:13:09-08:00 America/Los_Angeles
    - Minor fixes
    - Fix race condition/off by 1 when using the 'run' command
0.001037  2017-11-29 09:44:23-08:00 America/Los_Angeles
    - Add slack integrations
    - Add support for .yath.user.rc
0.001036  2017-11-28 10:26:36-08:00 America/Los_Angeles
    - Harness directives for meta-data
    - Add email capabilities
0.001035  2017-11-22 09:59:49-08:00 America/Los_Angeles
    - Fix infinite recrusion looking for .yathrc
    - Add 'failed' command
0.001034  2017-11-20 09:19:47-08:00 America/Los_Angeles
    - Prevent deadlock on win32 (tests do not pass yet in win32)
0.001033  2017-11-18 16:16:52-08:00 America/Los_Angeles
    - Add a summarize_events to Test2::Tools::HarnessTester
0.001032  2017-11-15 08:44:40-08:00 America/Los_Angeles
    - Add an extra @INC hook in persistent mode for dep tracing
0.001031  2017-11-03 09:18:56-07:00 America/Los_Angeles
    - Remove Debug tool that used sigusr1
    - Fix support for perls as far back as 5.8.9
0.001030  2017-11-01 13:24:17-07:00 America/Los_Angeles
    - Make tests work witohut old version installed
    - Do not use shm by default
    - add tests for replay command
    - better test.pl
    - use clone_io instead of hand rolling it (Formatter)
    - doc fixes
    - make sure test.pl does not run itself
0.001029  2017-10-31 14:53:52-07:00 America/Los_Angeles
    - Move away from IPC::Open3
0.001028  2017-10-31 09:35:23-07:00 America/Los_Angeles
    - More test coverage improvements
0.001027  2017-10-27 15:11:57-07:00 America/Los_Angeles
    - Do not inject a HASHREF as an env var key
    - Improved test coverage
    - Added a test helper for commands (including third party ones)
    - Do not remove newlines from stdout
    - Merge sequential stdout/stderr lines
    - Add minimal test descriptions
0.001026  2017-10-24 10:00:34-07:00 America/Los_Angeles
    - Fix a couple commands that broke due ot @INC fixes
0.001025  2017-10-24 09:40:28-07:00 America/Los_Angeles
    - Require a newer goto-file to avoid changing exceptions
    - Allow control of default search locations
    - stop command now prints all to stdout
0.001024  2017-10-23 12:12:53-07:00 America/Los_Angeles
    - Make sure @INC is set as soon as possible
    - Do not let a file hide a command
0.001023  2017-10-20 22:16:33-07:00 America/Los_Angeles
    - Update to a newer HashBase
0.001022  2017-10-20 07:12:19-07:00 America/Los_Angeles
    - Minor test updates
0.001021  2017-10-13 11:02:22-07:00 America/Los_Angeles
    - More @INC corrections
    - DepTracer no longer mangles caller.
0.001020  2017-10-13 07:34:02-07:00 America/Los_Angeles
    - Use the correct @INC in all preload methods
0.001019  2017-10-11 10:08:14-07:00 America/Los_Angeles
    - Don't call find_yath() if we already found a yath (Matthew Horsfall)
    - Minor display optimizations
0.001018  2017-10-10 14:42:16-07:00 America/Los_Angeles
    - Fix a DESTROY typo (Michael McClimon)
    - Test2::Harness namespace does not use App::Yath namespace
    - Package delcaration allowed before harness directives
    - When respawning a stage may exit badly, nobody cares
    - Fix scheduling properly this time
    - Record timing data for all events
    - Stop using expensive canonical JSON for logs
    - Better $0 handling
0.001017  2017-10-07 16:24:01-07:00 America/Los_Angeles
    - Fix scheduling
    - Add 'times' tool
    - Put skip reason on same line as filename
0.001016  2017-10-03 07:14:08-07:00 America/Los_Angeles
    - More test coverage
    - Added --cover option
    - Added --dummy option
    - Improved 'start', 'stop', and 'run'
    - Remove chdir option
    - Fix broken replay command
    - Fix some deadlock conditions
    - Cleaner output
    - Do not wrap long output lines when output is not a terminal
    - DZIL generates some docs now
    - Minor bug fixes and improvements
    - Improved performance of the parser
    - Add # HARNESS-TIMEOUT-[TYPE] ##  header support
    - Add -q|--quiet mode
    - Do not try to kill job after post-exit timeout
    - Remove the tcm plugin (it is failure)
    - Handle sync points when incomplete lines are written
0.001015  2017-09-15 08:55:30-07:00 America/Los_Angeles
    - Put lib, blib, and -I's before system libs (Fixes #31)
    - Bump minimum goto-file version (Fixes #30)
    - Use $Config for path seperator instead of ':'
0.001014  2017-09-14 21:27:29-07:00 America/Los_Angeles
    - Pass-Through $ENV{PERL5LIB}
0.001013  2017-09-14 18:29:49-07:00 America/Los_Angeles
    - Put back code that was accidentally removed
0.001012  2017-09-14 15:19:19-07:00 America/Los_Angeles
    - Fix dep list
0.001011  2017-09-14 14:27:32-07:00 America/Los_Angeles
    - Fix bug where no-fork skipped tests
    - Use relative paths for tests in $0, __FILE__, and caller
0.001010  2017-09-14 10:31:35-07:00 America/Los_Angeles
    - Pull out the filter into goto::file 
    - Do not use filter for tests that come back as subrefs
    - Improve TCM plugin
    - Fix timeouts (again)
    - Remove unused variable
    - Stop waiting for a test once it is killed
    - Fix Typos
    - Some bug fixes
0.001009  2017-09-12 23:10:05-07:00 America/Los_Angeles
    - Better docs
    - More testing
    - Minor bug fixes
0.001008  2017-09-12 13:49:05-07:00 America/Los_Angeles
    NOW Feature-complete!
    (Needs docs and tests)
    - Fix dep versions in dist.ini
    - Improve test coverage
    - Better test.pl detection by yath command
    - Add color/no-color options
    - Support for project .yath.rc files
    - Make sure $VERSION is in correct files
    - Add 'help' command
    - Add 'init' command
    - More hooks for preload modules
    - Several bug fixes
    - Make it so that preload+fork does not add a stack layer
    - unify to only one 'yath' script
    - Split persist into multiple commands
    - Create a plugin system, Add TCM plugin to split out later
    - Remove pre-import option
    - Better default log location+name
    - Move CommandShared/Harness -> App/Command.pm
    - Add --no-long option
    - Add --exclude option
    - Bind lib & blib earlier, use absolute paths
    - Fix parser error on '}'
    - Allow -w in tests after preload
    - Handle timers better
0.001007  2017-09-11 21:40:28-07:00 America/Los_Angeles
    - Properly pass args given via '::'
    - Honor NO-STREAM header
    - Persist now reloads when a file is changed
0.001006  2017-09-06 14:24:18-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix replay
    - Add pre-import
    - Add load and load-import options
    - Add persistent harness
0.001005  2017-09-05 21:59:21-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix some bugs
    - Remove accidentally added file
    - Do not hang when waiting after control+c
    - Restructure Run/Runner to be more sane
    - Fix bugs, break out test file and queue
    - Add extra space in help dialog
    - Restructure common command options
    - Better queue handling
    - Put test and replay common logic in one place
    - Fix bugs in replay
    - Put common logic for test and replay commands in a single place.
0.001004  2017-08-31 21:02:34-07:00 America/Los_Angeles
    - Make test.pl ok with preload
    - Fix Formatter::Test2 for non-tty output
    - Add -T for timing data per-test
    - Better signal handling
    - More HARNESS- header options:
      - HARNESS-NO-TIMEOUT
    - Delete job dirs when they are done unless -k is used
0.001003  2017-08-30 23:18:54-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Set env vars in the run-runner for preload
    - Improve preload support
    - Fix formatter selection in Open3 runner
    - Update deps
0.001002  2017-08-29 21:10:17-07:00 America/Los_Angeles
    - Allow preload of Test::Builder
0.001001  2017-08-28 22:40:20-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Complete rewrite
0.000013  2017-01-03 21:18:19-08:00 America/Los_Angeles
    - Add event timeout option
    - Fix filename rendering when a test is done
    - Fixed handling of a "plan skip_all" issued in the main test (as opposed
      to a subtest). Partially fixes GitHub
      #21, reported by rjbs.
    - When a test file doesn't run any tests but exits successfully, this was
      treated as a pass. This is now detected and generates different output
      indicating that the process did not run any tests. Fixes the rest of
      GitHub #21, reported by rjbs.
0.000012  2016-12-19 11:46:41-08:00 America/Los_Angeles (TRIAL RELEASE)
    - Fixed #9, environment now set properly in preload mode
    - Job listeners now receive the Test2::Harness::Job object as the first
      argument, rather than just the job id.
    - Fixed the TAP parser to handle comments with leading
      whitespace. Previously it would strip all the leading whitespace out,
      causing both "# foo" and "#     foo" to be output the same way.
    - Add example for using the harness as a preload test file
    - Document using Test2::Harness as a preload test runner
    - Rewrote all of the internals so that the harness now handles Test2
      events directly, rather than converting them into Test2::Harness::Fact
      objects. The facts were losing some details of the events, and the event
      system already exists and is usable with the harness simply by adding
      some new harness-specific events. Implemented by Dave Rolsky. GitHub
      #20.
0.000011  2016-06-10 14:11:01-07:00 America/Los_Angeles
    - Fix rendering todo subtests...
0.000010  2016-06-10 13:39:27-07:00 America/Los_Angeles
    - More complete todo subtest fix
0.000009  2016-06-10 13:02:11-07:00 America/Los_Angeles
    - Fix TAP parsing bug when buffered subtests are TODO
0.000008  2016-05-31 07:35:46-07:00 America/Los_Angeles
    - Lower the IO::Handle version req
0.000007  2016-05-28 16:31:35-07:00 America/Los_Angeles
    - Try to fix JSON encoding problem
0.000006  2016-05-26 20:28:27-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Fix Data::Dumper typo >:-|
0.000005  2016-05-26 08:48:12-07:00 America/Los_Angeles (TRIAL RELEASE)
    - Add missing JSON prototype in Fact.pm
    - Add diagnostics when fact->to_json fails
0.000004  2016-05-26 08:35:04-07:00 America/Los_Angeles
    - Handle -I better in the runner
    - Make IO::Pty tests AUTHOR_TESTING only.
    - Add IO::Pty to diagnostics output
    - Diagnostics to show which JSON gets used
0.000003  2016-05-25 11:55:51-07:00 America/Los_Angeles
    - Get path separator from config
    - Better windows prereq specification
    - Handle buffered usbtest race condition
0.000002  2016-05-25 09:22:22-07:00 America/Los_Angeles
    - Die if given unknown command line flags. Patch by Dave Rolsky. GitHub
      #1.
    - Added -l (--lib) and -b (--blib) flags that work just like prove. Patch
      by Dave Rolsky. GitHub #2.
    - Better prereq list
    - Diagnostic test output
    - Old version and cross platform support
0.000001  2016-05-24 17:04:13-07:00 America/Los_Angeles
    - Initial Release