REST API

This document defines the REST API. By and large, this follows the WebIOpi REST interface:

https://code.google.com/p/webiopi/wiki/INSTALL?tm=6

There are a few notable differences, mostly to account for being on more than just the Rapsberry Pi. For instance, the pcDuino has different voltage and bit resolutions for some of its ADC and PWM channels, so the API to access that data must specify a pin.

Specific differences are noted as "COMPATIBILITY NOTE" below.

Status Codes

Just a few of the HTTP status codes you might expect to hit.

400 Bad Request (path incomplete) 403 GPIO # Not Available 403 GPIO # Disabled 404 [something] Not Found

BASIC

GET /map

Returns a JSON list, with each entry corresponding to a pin on the physical header. Each entry can be:

Some number (corresponding to a GPIO number)
"V33" (3.3 volt power)
"V50" (5.0 volt power)
"GND" (ground)

Example:

["V33", "V50", 2, "V50", 3, "GND", 4, 14, "GND", 15, 17, 18, 27, "GND", 22, 23, "V33", 24, 10, "GND", 9, 25, 11, 8, "GND", 7]

GET /*

Returns a JSON of available interfaces. Keys:

UART [bool]
SPI [bool]
I2C [bool]
ONEWIRE [bool]
GPIO [object]

GPIO's keys are numbers mapping to each GPIO pin. The values are objects containing:

function ["IN", "OUT", "ALTn" (where n is some number)]
value [bool]

Example:

{
    "UART": 1, 
    "SPI": 0, 
    "I2C": 0, 
    "ONEWIRE": 0, 
    "GPIO": {
        "0": {"function": "IN", "value": 1}, 
        "1": {"function": "IN", "value": 1}, 
        "2": {"function": "IN", "value": 1}, 
        "3": {"function": "IN", "value": 1}, 
        "4": {"function": "IN", "value": 1}, 
        "5": {"function": "IN", "value": 1}, 
        "6": {"function": "IN", "value": 1}, 
        "7": {"function": "ALT0", "value": 1},
        "8": {"function": "ALT0", "value": 1},
        "9": {"function": "ALT0", "value": 0},
        "10": {"function": "ALT0", "value": 0}, "11": {"function": "ALT0", "value": 0}, "12": {"function": "IN", "value": 0}, "13": {"function": "IN", "value": 0}, "14": {"function": "ALT0", "value": 1}, "15": {"function": "ALT0", "value": 1}, "16": {"function": "IN", "value": 0}, "17": {"function": "IN", "value": 0}, "18": {"function": "IN", "value": 0}, "19": {"function": "IN", "value": 0}, "20": {"function": "IN", "value": 0}, "21": {"function": "IN", "value": 0}, "22": {"function": "IN", "value": 0}, "23": {"function": "IN", "value": 0}, "24": {"function": "IN", "value": 0}, "25": {"function": "IN", "value": 0}, "26": {"function": "IN", "value": 0}, "27": {"function": "IN", "value": 0}, "28": {"function": "IN", "value": 1}, "29": {"function": "IN", "value": 1}, "30": {"function": "IN", "value": 0}, "31": {"function": "OUT", "value": 1}, "32": {"function": "OUT", "value": 0}, "33": {"function": "IN", "value": 0}, "34": {"function": "IN", "value": 1}, "35": {"function": "IN", "value": 1}, "36": {"function": "IN", "value": 1}, "37": {"function": "IN", "value": 0}, "38": {"function": "OUT", "value": 0}, "39": {"function": "IN", "value": 0}, "40": {"function": "ALT0", "value": 0}, "41": {"function": "OUT", "value": 0}, "42": {"function": "IN", "value": 0}, "43": {"function": "IN", "value": 0}, "44": {"function": "ALT0", "value": 1}, "45": {"function": "ALT0", "value": 0}, "46": {"function": "IN", "value": 1}, "47": {"function": "OUT", "value": 0}, "48": {"function": "ALT3", "value": 1}, "49": {"function": "ALT3", "value": 1}, "50": {"function": "ALT3", "value": 1}, "51": {"function": "ALT3", "value": 1}, "52": {"function": "ALT3", "value": 1}, "53": {"function": "ALT3", "value": 1}}}

GPIO

GET /devices/[name]/count

Returns the digital channel count

GET /devices/[name]/[channel]/value

Returns the value of the given digital channel

GET /devices/[name]/*/value

Returns a list of values of all digital channels

(Return as CSV list?)

(COMPATIBILITY NOTE: This is in the WebIOpi docs as POST)

POST /devices/[name]/[channel]/value/[digit]

Sets the value of the digital channel

GET /devices/[name]/*/integer

Return an integer of all digital bits

POST /devices/[name]/*/integer/[value]

Write an integer for all digital bits

GET /devices/[name]/[channel]/function

Returns the current function of the given channel ("IN" or "OUT"(?))

POST /devices/[name]/[channel]/function/[func]

Sets the function of the given digital channel.

setFunctionString()

(COMPATIBILITY NOTE: This is in the WebIOpi docs as GET)

GET /devices/[name]/*

Returns a list containing the value and function of all digital channels.

(Return as CSV list?)

ADC (Analog-to-Digital Converter)

GET /devices/[name]/analog/count

(NOTE: Redundant listings in WebIOpi docs for analogCount and analogResolution)

GET /devices/[name]/analog/maximum

DEPRECATED. Return the maximum integer value of channel 0.

This is retained for compatibility with the original WebIOPi. Since different pins can have different values, you should use the version that specifies a pin instead.

GET /devices/[name]/analog/[channel]/maximum

Return the maximum integer value of the given channel.

analogMaximum()

GET /devices/[name]/analog/integer/vref

DEPRECATED. Return the voltage reference of channel 0.

This is retained for compatibility with the original WebIOPi. Since different pins can have different values, you should use the version that specifies a pin instead.

GET /devices/[name]/analog/[channel]/integer/vref

Return the voltage reference of the given channel.

analogReference()

GET /devices/[name]/analog/[channel]/integer

GET /devices/[name]/analog/[channel]/float

GET /devices/[name]/analog/[channel]/volt

GET /devices/[name]/analog/*/integer

analogReadAll()

(list returned as CSV?)

GET /devices/[name]/analog/*/float

(list returned as CSV?)

DAC (Digital-to-Analog Converter)

Extends ADC interface

POST /devices/[name]/analog/[channel]/integer/[value]

POST /devices/[name]/analog/[channel]/float/[value]

POST /devices/[name]/analog/[channel]/volt/[value]

PWM (Pulse Width Modulation)

GET /devices/[name]/pwm/count

GET /devices/[name]/pwm/resolution

DEPRECATED. Return the PWM resolution of channel 0.

This is retained for compatibility with the original WebIOPi. Since different pins can have different values, you should use the version that specifies a pin instead.

GET /devices/[name]/pwm/[channel]/resolution

Return the PWM resolution of the given channel.

pwmResolution()

GET /devices/[name]/pwm/maximum

DEPRECATED. Return the PWM maximum integer value of channel 0.

This is retained for compatibility with the original WebIOPi. Since different pins can have different values, you should use the version that specifies a pin instead.

GET /devices/[name]/pwm/[channel]/maximum

Return the PWM maximum integer value of the given channel.

pwmMaximum()

(COMPATIBILITY NOTE: WebIOpi does not use channel argument)

POST /devices/[name]/pwm/[channel]/integer/[value]

POST /devices/[name]/pwm/[channel]/float/[value]

POST /devices/[name]/pwm/[channel]/angle/[value]

GET /devices/[name]/pwm/[channel]/integer

GET /devices/[name]/pwm/[channel]/float

GET /devices/[name]/pwm/[channel]/angle

GET /devices/[name]/pwm/*/integer

GET /devices/[name]/pwm/*/float

GET /devices/[name]/pwm/*/angle

GET /devices/[name]/pwm/*

VideoStream

COMPATIBILITY NOTE: This is an extension which is not currently implemented in WebIOPi

GET /devices/[name]/video/count

Returns the number of video streams that are available.

GET /devices/[name]/video/[channel]/resolution

Returns the width and height separated by an x list, followed by a p, followed the fps. Example:

640x480p60

POST /devices/[name]/video/[channel]/resolution/[width]/[height]/[fps]

Sets the resolution and frame rate of the given channel.

If the channel refuses to set the given resolution, HTTP status code 403 will be sent.

GET /devices/[name]/video/[channel]/kbps

Get the current bitrate, as an integer in kb per second.

POST /devices/[name]/video/[channel]/kbps/[value]

Set the current bitrate. [value] is an integer in kb per second.

GET /devices/[name]/video/[channel]/allowed-content-types

Get list of allowed MIME content types. Allowed types will be sent as a MIME string, with one on each line.

GET /devices/[name]/video/[channel]/stream/[content-type1]/[content-type2]

Get the video stream with the desired content type.

NOTE: [content-type1]/[content-type2] is really just a straight MIME type, like "text/video". It's split up this way for the sake of popular server-side web libraries.

SPI

I2C

OneWire

Pressure

Luminosity

Distance

1 POD Error

The following errors were encountered while parsing the POD:

Around line 321:: '=end' without a target?

To install Device::WebIO::Dancer, copy and paste the appropriate command in to your terminal.

cpanm

cpanm Device::WebIO::Dancer

CPAN shell

perl -MCPAN -e shell
install Device::WebIO::Dancer

For more information on module installation, please visit the detailed CPAN module installation guide.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)

REST API

Status Codes

BASIC

GET /map

GET /*

GPIO

GET /devices/[name]/count

GET /devices/[name]/[channel]/value

GET /devices/[name]/*/value

POST /devices/[name]/[channel]/value/[digit]

GET /devices/[name]/*/integer

POST /devices/[name]/*/integer/[value]

GET /devices/[name]/[channel]/function

POST /devices/[name]/[channel]/function/[func]

GET /devices/[name]/*

ADC (Analog-to-Digital Converter)

GET /devices/[name]/analog/count

GET /devices/[name]/analog/maximum

GET /devices/[name]/analog/[channel]/maximum

GET /devices/[name]/analog/integer/vref

GET /devices/[name]/analog/[channel]/integer/vref

GET /devices/[name]/analog/[channel]/integer

GET /devices/[name]/analog/[channel]/float

GET /devices/[name]/analog/[channel]/volt

GET /devices/[name]/analog/*/integer

GET /devices/[name]/analog/*/float

DAC (Digital-to-Analog Converter)

POST /devices/[name]/analog/[channel]/integer/[value]

POST /devices/[name]/analog/[channel]/float/[value]

POST /devices/[name]/analog/[channel]/volt/[value]

PWM (Pulse Width Modulation)

GET /devices/[name]/pwm/count

GET /devices/[name]/pwm/resolution

GET /devices/[name]/pwm/[channel]/resolution

GET /devices/[name]/pwm/maximum

GET /devices/[name]/pwm/[channel]/maximum

POST /devices/[name]/pwm/[channel]/integer/[value]

POST /devices/[name]/pwm/[channel]/float/[value]

POST /devices/[name]/pwm/[channel]/angle/[value]

GET /devices/[name]/pwm/[channel]/integer

GET /devices/[name]/pwm/[channel]/float

GET /devices/[name]/pwm/[channel]/angle

GET /devices/[name]/pwm/*/integer

GET /devices/[name]/pwm/*/float

GET /devices/[name]/pwm/*/angle

GET /devices/[name]/pwm/*

VideoStream

GET /devices/[name]/video/count

GET /devices/[name]/video/[channel]/resolution

POST /devices/[name]/video/[channel]/resolution/[width]/[height]/[fps]

GET /devices/[name]/video/[channel]/kbps

POST /devices/[name]/video/[channel]/kbps/[value]

GET /devices/[name]/video/[channel]/allowed-content-types

GET /devices/[name]/video/[channel]/stream/[content-type1]/[content-type2]

SPI

I2C

OneWire

Pressure

Luminosity

Distance

Module Install Instructions